Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleNetwork Specific


Competency Competency Requirements Upload RequirementsExamples

Telecommunications Operator.Induction.Vodafone Health and Safety

Anchor
101
101

The required evidence will be one of the following:

      • Certificate or competency card showing Vodafone Health and Safety course completion
  • The evidence will be issued by Vodafone
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= 2 years from issue date

Telecommunications Operator.Module.Vodafone EMF/RF Awareness

The required evidence will be a:

      • Certificate or competency card showing EMF/RF Awareness course completion
  • Issue date must be clear and current
  • Must show assessment pass result
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years or has expired, an additional certificate showing EMF/RF Awareness course completion MUST be provided

Issue Date= As shown on evidence

Expiry Date= 3 years from issue date

Telecommunications Operator.Accreditation.Vodafone Individual Accreditation

The required evidence will be a:

      • Vodafone “Individual Accreditation Application”
  • The evidence will be issued by Vodafone
  • Expiry is 2 years from receiving evidence
  • All sections must be filled out
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Underground Services.Induction.Exxon Mobil Safety Passport


The evidence will be a:

        • Certificate or competency card showing Safety Passport
  • Evidence will be issued by Exxon Mobile Only
  • Issue and expiry date must be clear and visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Safety Passport MUST be provided


Electrical.Document.Transpower Substation Entry SE1

Anchor
102
102

The evidence will be a one of the following:

    • Certificate showing Substation Entry (SE1) Level 1 course completion
    • Certificate showing TPSS 06.21 RAE Restricted Areas Entry course completion 
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 1 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Power.Document.Transpower-SE2 On Job Assessment or Refresher Webinar

The evidence will be a:

    • Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided

Issue Date= Course completion date

Expiry Date=2 years from course completion date

Power.Document.Transpower-SE2 On Job Assessment (Tauranga substation)

The evidence will be a:

    • Certificate showing Substation Entry (SE2) Level 2 Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date=Non-expiring

Power.Document.Transpower Work Management

The evidence will be a:

    • Certificate showing Work Management course completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= 2 years from course completion date



Rail.Course.KiwiRail Electrification Awareness Basic (EAB)

Anchor
103
103

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB)
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz 
  • Evidence must show course completion date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided 

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Rail.Course.KiwiRail Electrification Awareness Intermediate (EAI)

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
    • Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI)
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
    • Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Rail.Induction.KiwiRail

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail Induction
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion ofKiwiRail Induction
    • Screenshot or website print-out confirming course completion / pass result KiwiRail Induction issued by KiwiRail MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Rail.Induction.KiwiRail Individual Train Detection

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail Individual Train Detection
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion of KiwiRail Individual Train Detection issued by KiwiRail
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detectionissued by KiwiRail MUSTbe provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Underground Services.Licence.BeforeUdig

Anchor
104
104


The evidence will be a:

      • Certificate showing beforeUdig Certified Locator
  • Evidence will be issued by beforeUdig Certified Locator ONLY
  • Course Completion date must be visible
  • Where assessor /signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 3 years, an additional certificate showing beforeUdig Certified Locator MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Underground Services.Induction.CentrePort Wellington

The evidence will be one of the following

      • CentrePort Access Card
      • Certificate showing CentrePort Wellington Induction
  • Evidence will be issued by CentrePort ONLY
  • Expiry date must be visib
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence has expired, an additional certificate or card issued from CentrePort MUST be provided

Issue Date= Not required

Expiry Date= As per evidence

Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit

The evidence will be a:

      • Ventia Certificate of Achievement showing completing EDP/IPP Permit 
  • Evidence will be issued by Ventia ONLY
  • Course Completion date must be visible
  • VisRes ID number must be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing completing EDP/IPP Permit MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Electrical.Course.Ventia Risk Management

The evidence will be a:

      • Ventia Certificate of Achievement showing completing Risk Management 
  • Evidence will be issued by Ventia ONLY
  • Course Completion date must be visible
  • VisRes ID number must be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing Risk Management MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Water.Certificate.Watercare Customer Experience

Anchor
105
105

The evidence will be:

      • Watercare certificate showing recognition of "Customer Experience Training"  Course Certificate Number MUST be visible 
  • Evidence will be issued by Watercare ONLY
  • Expiry date MUST be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= As per certificate

Expiry Date=Not required


Water.Induction.Watercare

The evidence will be one of the following:

      • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
      • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
      • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible 
  • Evidence will be issued by Watercare ONLY
  • Expiry date MUST be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional competency card of one of the following 

  • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
  • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
  • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible MUST be provided

Issue Date= 2 years prior to expiry date

Expiry Date= As per evidence

Electrical.Induction.Ventia Chorus Protect the Network

The evidence will be one of the following:

      • Certificate of Achievement showing recognition of Chorus - Protect The Network 
          • VisRes ID number and VNZ trainer name must be displayed
          • Course Completion date must be visible
      • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
          • Must be from visres.vspl.net website
          • Expiry date must be visible and current
  • Evidence will be issued by Ventia ONLY
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Telecommunications Operator.Induction.Spark or Chorus Protect the Network

The evidence will be one of the following:

      • Ventia Certificate of Achievement showing recognition of Chorus - Protect The Network
          • Course Completion date must be visible
          • VisRes ID number and VNZ trainer name must be displayed
      • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
          • Must be from visres.vspl.net website
          • Expiry date must be visible and current
      • Screenshot from Spark website showing under "My Achievements" course completion of PTN Accreditation Training
          • Must be from ako.spark.co.nz
          • Completed Date must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

Issue Date= Course completion date/2 years prior to expiry date

Expiry Date= 2 years from course completion date/ evidence expiry date

Telecommunications Operator.Induction.Horizon Network Safety

Anchor
106
106




Telecommunications Operator.Induction.Kordia Site Access

The required evidence will be a:

  • Issue date must be clear
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional Screenshot or email from Access@kordia.co.nz confirming Site Accredited MUST be provided

Issue Date= Course completion date

Expiry Date= 3 years from course completion date


Telecommunications Operator.Induction.Vocus Network Safety

The evidence will be:

      • Vocus Statement of Completion MUST be visible showing one of the following 
          • Vocus NZ Bunker site 
          • Vocus NZ Core Site
          • VDC-AKL
          • Vocus NZ Offices
  • Evidence will be issued by Vocus ONLY
  • Issued on AND Valid to MUST be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 years, an additional Vocus Statement of Completion showing one of the following:

        • Vocus NZ Bunker site 
        • Vocus NZ Core Site
        • VDC-AKL
        • NZ Offices MUST be provided

Issue Date= The course completion date

Expiry Date = 1 years from issue date

Telecommunications Operator.Course.Chorus Remote Access Tracks

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
      • NZQA Record of Achievement showing completion the following unit standards 17976, 17978
      • Chorus WTC 6 Remote Access Tracks or Refresher Certificate 
  • Date of training completion or date of unit standards achieved must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
      • Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date

Electrical.Induction.Powernet Network Access

Anchor
107
107

The evidence will be one of the following:

      • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
      • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
      • Certificate or competency card issued from Powernet stating “Network Access Certificate”
  • Assessment Completion date or expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
  • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
  • Certificate or competency card issued from Powernet stating “Network Access Certificate”  MUSTbe provided

Issue Date= The course completion date

Expiry Date = 1 years from issue date

Electrical.Induction.Unison Networks Safety

The evidence will be one:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Unison OS1010 (Fibre)
  • Assessment Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Unison OS1010 (Fibre)” MUST be provided

Issue Date= The course date

Expiry Date = 1 years from issue date

Electrical.Induction.Counties Power Network Safety

The evidence will be one of the following:

      • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
      • Certificate or competency card issued from Counties Power stating “Counties Power Authorised”
  • Assessment Completion date or expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 year, an additional certificate showing one of the following

  • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
  • Certificate or competency card issued from Counties Power stating “Counties Power Authorised” MUSTbe provided

Issue Date= The course completion date

Expiry Date = 1 years from issue date

Electrical.Course.Aurora Electrical Course Instruction

 The required evidence will be either of the following:

      • Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction
  • Evidence must be valid and in date
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Induction.Wellington Electricity Safe Work Practices

Anchor
108
108

The evidence will be:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction  MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Course.Wellington Electricity Permit Management

The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management
        • Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
  • Date of training completion must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Electrical.Induction.Waipa Networks

The evidence will be:

      • Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems
  • Assessment Completion date must be visible
  • Where Waipa Representative signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Applicant must have signed induction form
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUSTbe provided

Issue Date= Induction date on evidence

Expiry Date = 2 years from induction date

Electrical.Course.Meridian EAC

The required evidence will be one of the following:

    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites
    • Email confirmation from @meridianenergy.co.nz of EAC Course completion
  • Evidence must be valid and visible date
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Copy must be clear and legible

If completion date exceeds 2 years or has expired, an additional refresher or course completion of either

    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
    • Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Electrical.Course.ScanPower - Close Approach

Anchor
109
109

 The required evidence will be either of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
      • Email confirmation from @scanpower.co.nz of course completion of “close approach”
  • Evidence must be valid and in date
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies”
    • Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Electrical.Accreditation.Unison Declaration of Competency to access


Telecommunications Operator.Competency.Chorus WTC3 - Overhead Network and NC or NZCESL2

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion

AND

      • NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion or date of unit standard achieved must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion MUST be provided
NEEDS CHECKING
Power.Induction.Powerco Network Safety - Part A/B

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
      • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction  
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
  • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Course.Powerco High Voltage Isolation & Access Procedures

Anchor
110
110

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures
      • Attendance record from a NZQA training organisation showing Powerco HVIAP
  • Course Completion date must be visible
  • Pass Number MUST be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures
  • Attendance record from a NZQA training organisation showing Powerco HVIAP – must show PASS numberMUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Course.Powerco Operational Communication

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
      • Attendance record from a NZQA training organisation showing Powerco Operational communication
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
  • Attendance record from a NZQA training organisation showing Powerco Operational communicationMUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Powerco WTC 5C Contractor Attestation

The required evidence will be:

      • Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
  • Must show Competency Class 5C Adjacent Communications Work
  • The evidence Must have Powerco’s Logo and match example document
  • The evidence Must have PDF format
  • Where “declaration completed by” must be filled out with Company, position, signature and date
  • Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Declaration must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date:= Date signed

•Expiry Date: Not required

Electrical.Induction.Vector Network Safety (WTC1)

The evidence will be one:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector Network Safety Induction or Vector WTC 1 Induction course
  • Assessment Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 year, an additional certificate showing Attendance for “Network Safety Induction” or “Vector Induction WTC 1” MUST be provided

Issue Date= The course date

Expiry Date = 2 years from issue date

Electrical.Induction.Vector Network Safety Induction (WTC 2)

Anchor
111
111

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
      • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number
  • Assessment Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
  • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUSTbe provided

Issue Date= The course date

Expiry Date = 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC3

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
      • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
  • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 5

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
      • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
  • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 6

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
      • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
  • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC7

Anchor
112
112

 The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
      • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
  • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 7A

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
      • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
  • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
      • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
  • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8A

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
      • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
  • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8B

Anchor
113
113

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
      • Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
  • Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8C

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
      • Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
  • Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 10

 The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence date exceeds 2 years, and additional certificate issued from a NZQA  showing Vector WTC 10 MUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Equipment Type Assessment


Power.Document.Vector Electricity 3 site visits

 The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
      • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
      • Log book showing 3 site visits with manager/supervisor sign off
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable


Issue Date = On evidence

Expiry date= Not required