Versions Compared

Version Old Version 38 New Version 39
Changes made by

Natalie McMaster (Unlicensed)

Natalie McMaster (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleNetwork Specific


Telecommunications Operator.Induction.Horizon Network Safety

a:
    • Issue date must be clear completion date exceeds 3 yearsScreenshot or email from Access@kordia.co.nz confirming Site Accredited MUST Course completion date 3 years from course completion dateTelecommunications Operator.Course.Chorus Remote Access Tracks one of the followingCertificate competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
  • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
  • NZQA Record of Achievement showing completion the following unit standards 17976, 17978
  • Chorus WTC 6 Remote Access Tracks or Refresher Certificate 
  • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed 2
  • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
  • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
    • Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be certificate or competency card showing either The course 2 issue ElectricalPowernet Network Access107 following:
        • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
        • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
        • Certificate or competency card issued from Powernet stating “Network Access Certificate”
  • Assessment Completion date or expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed 2 year certificate
  • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
    • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box tickedCertificate or competency card issued from Powernet stating “Network Access Certificate”  2 108Counties Power Network SafetyElectricalCourse.ScanPower - Close Approach The required either card issued from a NZQA accredited training organisation showing completion of “Close Approach”
  • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
  • Email confirmation from @scanpower.co.nz of course completion of “close approach”
    • Evidence must be valid and in dateCan be in colour copy OR
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
    • If years refresher or course completion of eitherCertificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach” “Scanpower Competencies”Email confirmation from @scanpower.co.nz of course completion of “close approach” The required Chorus WTC 3 Overhead Network Course Completion

    AND

        • NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2
  • Date of training completion or date of unit standard achieved must be visible
    • Can be in colour copy OR If on evidence years an or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion MUST be providedPower.Induction.Powerco Network Safety - Part A/B Powerco Network Safety InductionAttendance record from a NZQA training organisation showing Powerco Network Safety Induction  Course Completion on Powerco Network Safety InductionAttendance record from a NZQA training organisation showing Powerco Network Safety Induction Image RemovedPowerco WTC 5C Contractor Attestation required
      • Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
  • Must show Competency Class 5C Adjacent Communications Work
  • The evidence Must have Powerco’s Logo and match example document
  • The evidence Must have PDF format
  • Where “declaration completed by” must be filled out with Company, position, signature and date
    • Applicant’s name MUST be displayed on the Declaration of names such as 'Chris' for 'Christopher' is accepted).
  • Declaration must be clear and legible
  • Can be in colour copy OR black and white copy
    • Electrical.Induction.Vector Network Safety (WTC1) Network Safety Induction or Vector WTC 1 Induction course Attendance for “Network Safety Induction” or “Vector Induction WTC 1” The course date DateElectricalInduction Network Safety Induction (WTC 2)111111 Vector NSI or 2 NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number NSI or Vector 2 NSI Course included USH001 Work Type Competency The course date Date WTC3 3 3 3 3 Core Instruction WTC 6 course WTC 6
  • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visibleColour copy or is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided On On evidence or 2 years from issue date Core Instruction WTC7112 7 7
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

    • Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided On evidence or 2 years from issue dateThe The organisation showing course completion of Vector WTC 8
  • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

    • Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe providedIssue Date = On On evidence or 2 years from issue dateThe course Vector WTC 8A
  • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible legible
  • Colour copy or black and white copy is acceptable

    • Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8AMita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided On On evidence or 2 years from issue date

    Power.Document.Vector Electricity Core Instruction WTC 8B

    The course 8BMita Consulting letter showing attendance 8B Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visibleColour copy or is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8BMita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUSTbe provided On On evidence or 2 years from issue dateThe course 8CMita Consulting letter showing attendance 8C Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible be clear and legible
  • Colour copy or black and white copy is acceptable

    • Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8CMita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUSTbe providedIssue Date = On On evidence or 2 years from issue date The Course U/G Switchgear Types up to 33kV
    Competency Competency Requirements Upload RequirementsExamples

    Telecommunications Operator.Induction.Vodafone Health and Safety

    Anchor
    101
    101

    The required evidence will be one of the following:

        • Certificate or competency card showing Vodafone Health and Safety course completion
    • The evidence will be issued by Vodafone
    • Evidence must be valid and in date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date= As shown on evidence

    Expiry Date= 2 years from issue date

    Telecommunications Operator.Module.Vodafone EMF/RF Awareness

    The required evidence will be a:

        • Certificate or competency card showing EMF/RF Awareness course completion
    • Issue date must be clear and current
    • Must show assessment pass result
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds 3 years or has expired, an additional certificate showing EMF/RF Awareness course completion MUST be provided

    Issue Date= As shown on evidence

    Expiry Date= 3 years from issue date

    Telecommunications Operator.Accreditation.Vodafone Individual Accreditation

    The required evidence will be a:

        • Vodafone “Individual Accreditation Application”
    • The evidence will be issued by Vodafone
    • Expiry is 2 years from receiving evidence
    • All sections must be filled out
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date= As shown on evidence

    Expiry Date= 2 years from issue date

    Underground Services.Induction.Exxon Mobil Safety Passport


    The evidence will be a:

          • Certificate or competency card showing Safety Passport
    • Evidence will be issued by Exxon Mobile Only
    • Issue and expiry date must be clear and visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 years, an additional certificate showing Safety Passport MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Electrical.Document.Transpower Substation Entry SE1

    Anchor
    102
    102

    The evidence will be a one of the following:

      • Certificate showing Substation Entry (SE1) Level 1 course completion
      • Certificate showing TPSS 06.21 RAE Restricted Areas Entry course completion 
    • Evidence will be issued by Gridskills ONLY
    • Course Completion date must be visible
    • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable
    Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 1 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Power.Document.Transpower-SE2 On Job Assessment or Refresher Webinar

    The evidence will be a:

      • Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate
    • Evidence will be issued by Gridskills ONLY
    • Course Completion date must be visible
    • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided

    Issue Date= Course completion date

    Expiry Date=2 years from course completion date

    Power.Document.Transpower-SE2 On Job Assessment (Tauranga substation)

    The evidence will be a:

      • Certificate showing Substation Entry (SE2) Level 2 Certificate
    • Evidence will be issued by Gridskills ONLY
    • Course Completion date must be visible
    • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Issue Date= Course completion date

    Expiry Date=Non-expiring

    Power.Document.Transpower Work Management

    The evidence will be a:

      • Certificate showing Work Management course completion
    • Evidence will be issued by Gridskills ONLY
    • Course Completion date must be visible
    • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date



    Rail.Course.KiwiRail Electrification Awareness Basic (EAB)

    Anchor
    103
    103

    The required evidence will be either of the following:

      • Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail
      • Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB)
    • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz 
    • Evidence must show course completion date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date exceeds 2 years, an additional refresher or course completion of either

      • Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail
      • Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided 

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Rail.Course.KiwiRail Electrification Awareness Intermediate (EAI)

    The required evidence will be either of the following:

      • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
      • Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI)
    • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
    • Evidence must be valid and in date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date exceeds 2 years, an additional refresher or course completion of either

      • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
      • Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Rail.Induction.KiwiRail

    The required evidence will be either of the following:

      • Copy of email confirming course completion of KiwiRail Induction
      • Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction
    • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
    • Evidence must be valid and in date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date= Course completion date

    Expiry Date= Not required

    Rail.Induction.KiwiRail Individual Train Detection

    The required evidence will be either of the following:

      • Copy of email confirming course completion of KiwiRail Individual Train Detection
      • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection
    • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
    • Evidence must be valid and in date
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date exceeds 2 years, an additional refresher or course completion of either

      • Copy of email confirming course completion of KiwiRail Individual Train Detection issued by KiwiRail
      • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detectionissued by KiwiRail MUSTbe provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date


    Underground Services.Licence.BeforeUdig

    Anchor
    104
    104


    The evidence will be a:

        • Certificate showing beforeUdig Certified Locator
    • Evidence will be issued by beforeUdig Certified Locator ONLY
    • Course Completion date must be visible
    • Where assessor /signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 3 years, an additional certificate showing beforeUdig Certified Locator MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Underground Services.Induction.CentrePort Wellington

    The evidence will be one of the following

        • CentrePort Access Card
        • Certificate showing CentrePort Wellington Induction
    • Evidence will be issued by CentrePort ONLY
    • Expiry date must be visib
    • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence has expired, an additional certificate or card issued from CentrePort MUST be provided

    Issue Date= Not required

    Expiry Date= As per evidence

    Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit

    The evidence will be a:

        • Ventia Certificate of Achievement showing completing EDP/IPP Permit 
    • Evidence will be issued by Ventia ONLY
    • Course Completion date must be visible
    • VisRes ID number must be visible 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing completing EDP/IPP Permit MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date


    Electrical.Course.Ventia Risk Management

    The evidence will be a:

        • Ventia Certificate of Achievement showing completing Risk Management 
    • Evidence will be issued by Ventia ONLY
    • Course Completion date must be visible
    • VisRes ID number must be visible 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing Risk Management MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Water.Certificate.Watercare Customer Experience

    Anchor
    105
    105

    The evidence will be:

        • Watercare certificate showing recognition of "Customer Experience Training"  Course Certificate Number MUST be visible 
    • Evidence will be issued by Watercare ONLY
    • Expiry date MUST be visible 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Issue Date= As per certificate

    Expiry Date=Not required


    Water.Induction.Watercare

    The evidence will be one of the following:

        • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
        • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
        • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible 
    • Evidence will be issued by Watercare ONLY
    • Expiry date MUST be visible 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 1 years, an additional competency card of one of the following 

    • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
    • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
    • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible MUST be provided

    Issue Date= 1 years prior to expiry date

    Expiry Date= As per evidence

    Electrical.Induction.Ventia Chorus Protect the Network

    The evidence will be one of the following:

        • Certificate of Achievement showing recognition of Chorus - Protect The Network 
            • VisRes ID number and VNZ trainer name must be displayed
            • Course Completion date must be visible
        • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
            • Must be from visres.vspl.net website
            • Expiry date must be visible and current
    • Evidence will be issued by Ventia ONLY
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Telecommunications Operator.Induction.Spark or Chorus Protect the Network

    The evidence will be one of the following:

        • Ventia Certificate of Achievement showing recognition of Chorus - Protect The Network
            • Course Completion date must be visible
            • VisRes ID number and VNZ trainer name must be displayed
        • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
            • Must be from visres.vspl.net website
            • Expiry date must be visible and current
        • Screenshot from Spark website showing under "My Achievements" course completion of PTN Accreditation Training
            • Must be from ako.spark.co.nz
            • Completed Date must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

    Issue Date= Course completion date/2 years prior to expiry date

    Expiry Date= 2 years from course completion date/ evidence expiry date

    Contractor.Authority.Chorus Access Card

    Issue Date= As shown on evidence

    Expiry Date= As Shown on evidence

    Anchor
    106106

    Telecommunications Operator.Induction.Kordia Site Access

    The required evidence will be

    one of the following:

        • Chorus Access Card 
    • Must show "Chorus Access Card"
    • Must display image of worker
    • Expiry date must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence

    has expired, an additional

    card must be provided

    Issue Date=

    Not required

    Expiry Date=

    As Shown on evidence


    Telecommunications Operator.Induction.

    Vocus

    Horizon Network Safety

    Anchor
    106
    106

    The evidence will be :

    Vocus Statement of Completion MUST be visible showing

    one of the

    following 
      • Vocus NZ Bunker site 
      • Vocus NZ Core Site
      • VDC-AKL
      • Vocus NZ Offices
  • Evidence will be issued by Vocus ONLY
    • Issued on AND Valid to MUST be visible 

    following:

        • Horizon Network Safety Certificate 
    • Assessment Completion date or expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 1 years, an additional Vocus Statement of Completion showing one of the following:

          • Vocus NZ Bunker site 
          • Vocus NZ Core Site
          • VDC-AKL
          • NZ Offices MUST be provided

    Issue Date= The course completion date

    Expiry Date = 1 years from issue date

    Image Removed

    Issue Date= As shown on evidence

    Expiry Date= As Shown on evidence


    Telecommunications Operator.Induction.Kordia Site Access

    The required evidence will be

    a:

        • Screenshot or
    • Issue date must be clear
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence completion date exceeds

    3 years, an additional

    Screenshot or email from Access@kordia.co.nz confirming Site Accredited MUST be provided

    Issue Date=

    Course completion date

    Expiry Date=

    3 years from

    course completion date

    Image Removed

    Image Removed


    Telecommunications Operator.Induction.

    Anchor
    107

    Vocus Network Safety

    The evidence will be:

        • Vocus Statement of Completion MUST be visible showing one of the
        • following 
            • Vocus NZ Bunker site 
            • Vocus NZ Core Site
            • VDC-AKL
            • Vocus NZ Offices
    • Evidence will be issued by Vocus ONLY
    • Issued on AND Valid to MUST be visible 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds

    1 years, an additional

    Vocus Statement of Completion showing one of the following

    :

          • Vocus NZ Bunker site 
          • Vocus NZ Core Site
          • VDC-AKL
          • NZ Offices MUST be provided

    Issue Date= The course completion date

    Expiry Date =

    1 years from issue date

    Image Modified

    ElectricalTelecommunications Operator.Induction.Unison Networks SafetyCourse.Chorus Remote Access Tracks

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
    course
        • completion of
    Unison OS1010 (Fibre)
  • Assessment Completion date must be visible
    • Where assessor /
        • US 17976, 17978
        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
        • NZQA Record of Achievement showing completion the following unit standards 17976, 17978
        • Chorus WTC 6 Remote Access Tracks or Refresher Certificate 
    • Date of training completion or date of unit standards achieved must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    Colour copy or
    • Can be in colour copy OR black and white copy
    is acceptable

    Where the evidence completion date exceeds

    14 months

    2 years, an additional certificate

    showing Attendance for “Unison OS1010 (Fibre)” MUST be provided

    Issue Date= The course date

    Expiry Date = 14 months from issue date

    		Image Removed

    or competency card showing either

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
        • Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be provided

    Issue Date= The course completion date

    Expiry Date = 2 years from issue date

    Image Added

    Image Added

    Electrical.Induction.

    Counties Power Network Safety

    Powernet Network Access

    Anchor
    107
    107

    The evidence will be one of the following:

        • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
        • Certificate or competency card issued from Counties Power stating “Counties Power Authorised” Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
        • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
        • Certificate or competency card issued from Powernet stating “Network Access Certificate”
    • Assessment Completion date or expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 1 2 year, an additional certificate showing one of the following

    • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety InductionPowernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
    • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
    • Certificate or competency card issued from Counties Power stating “Counties Power Authorised” Powernet stating “Network Access Certificate”  MUSTbe provided

    Issue Date= The course completion date

    Expiry Date = 1 2 years from issue date

    Electrical.Course.Aurora Electrical Course Instruction The required Induction.Unison Networks Safety

    The evidence will be either of the following:

    Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”

    one:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Aurora Network Safety Induction
      • Evidence must be valid and in date
        • Unison OS1010 (Fibre)
    • Assessment Completion date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    If
    • Colour copy or black and white copy is acceptable
    Where the evidence completion date exceeds 2 years14 months, an additional refresher or course completion of either
      • Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion certificate showing Attendance for “Unison OS1010 (Fibre)” MUST be provided

    Issue Date= The course date

    Expiry Date = 14 months from issue date

    Electrical.Induction.Wellington Electricity Safe Work Practices
    Anchor
    108

    The evidence will be one of the following:

        • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction
      • Course Completion
        • Counties Power stating “Counties Power Authorised”
    • Assessment Completion date or expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 1 year, an additional certificate showing one of the following

    • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
    • Certificate or competency card issued from
    a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction 
    • Counties Power stating “Counties Power Authorised” MUSTbe provided

    Issue Date= Course The course completion date

    Expiry Date = 2 1 years from course completion issue date

    Electrical.Course.

    Wellington Electricity Permit Management

    The Aurora Electrical Course Instruction

     The required evidence will be one either of the following:

        • Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of
          • Wellington Electricity Permit Management
        • Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
    • Date of training completion must be visible
        • Aurora Network Safety Induction
    • Evidence must be valid and in date
    • Where assessor / trainer signature section is shown on the evidence, this must be completedApplicant’s name should be displayed on the evidence , this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible

    If completion date exceeds 2 years, an additional refresher or course completion of either

      • Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Image Added

    Electrical.Induction.Wellington Electricity Safe Work Practices

    Anchor
    108
    108

    The evidence will be:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction
    • Course Completion date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction  MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    Image Added

    Electrical.Course.Wellington Electricity Permit Management

    The required evidence will be one of the following:

          • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management
          • Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
    • Date of training completion must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date


    Electrical.Induction.Waipa Networks

    The evidence will be:

        • Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems
    • Assessment Completion date must be visible
    • Where Waipa Representative signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Applicant must have signed induction form
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUSTbe provided

    Issue Date= Induction date on evidence

    Expiry Date = 2 years from induction date

    Image Added

    Electrical.Course.Meridian EAC

    The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
      • Email confirmation from @meridianenergy.co.nz of EAC Course completion
    • Evidence must be valid and visible date
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Copy must be clear and legible

    If completion date exceeds 2 years or has expired, an additional refresher or course completion of either

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
      • Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Added

    Electrical.Course.ScanPower - Close Approach

    Anchor
    109
    109

     The required evidence will be either of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
        • Email confirmation from @scanpower.co.nz of course completion of “close approach”
    • Evidence must be valid and in date
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date exceeds 2 years, an additional refresher or course completion of either

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies”
      • Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Added

    Image Added

    Electrical.Accreditation.Unison Declaration of Competency to access

    The evidence will be one of the following:

        • Unison Declaration of Competency to Access  
    • Course Completion date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Issue Date = as per evidence

    Expiry date= as per evidence 
    Telecommunications Operator.Competency.Chorus WTC3 - Overhead Network and NC or NZCESL2

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion

    AND

        • NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion or date of unit standard achieved must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

    Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion MUST be provided

    Power.Induction.Powerco Network Safety - Part A/B

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
        • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction  
    • Course Completion date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
    • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Added

    Power.Course.Powerco High Voltage Isolation & Access Procedures

    Anchor
    110
    110

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures
        • Attendance record from a NZQA training organisation showing Powerco HVIAP
    • Course Completion date must be visible
    • Pass Number MUST be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures
    • Attendance record from a NZQA training organisation showing Powerco HVIAP – must show PASS numberMUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Added

    Power.Course.Powerco Operational Communication

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
        • Attendance record from a NZQA training organisation showing Powerco Operational communication
    • Course Completion date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
    • Attendance record from a NZQA training organisation showing Powerco Operational communicationMUST be provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Added

    Power.Document.Powerco WTC 5C Contractor Attestation

    The required evidence will be:

        • Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
    • Must show Competency Class 5C Adjacent Communications Work
    • The evidence Must have Powerco’s Logo and match example document
    • The evidence Must have PDF format
    • Where “declaration completed by” must be filled out with Company, position, signature and date
    • Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy Declaration must be clear and legible
    • Can be in colour copy OR black and white copy
    Where the evidence completion date exceeds 2 years, an additional certificate

    Issue Date:= Date signed

    •Expiry Date: Not required

    Image Added

    Electrical.Induction.Vector Network Safety (WTC1)

    The evidence will be one:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
    completion of Wellington Electricity Permit Management MUST be provided

    Issue Date= Course completion date

    Expiry Date= 2 years from course completion date

    		Electrical.Induction.Waipa Networks

    The evidence will be:

        • Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systemscourse completion of Vector Network Safety Induction or Vector WTC 1 Induction course
    • Assessment Completion date must be visible
    • Where Waipa Representative assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Applicant must have signed induction form
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable
    Where the evidence completion date exceeds 2 year, an additional form certificate showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management SystemsAttendance for “Network Safety Induction” or “Vector Induction WTC 1” MUST be provided

    Issue Date= Induction The course date on evidence

    Expiry Date = 2 years from induction issue date

    Electrical.

    Course.Meridian EACThe required

    Induction.Vector Network Safety Induction (WTC 2)

    Anchor
    111
    111

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation
      • showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
    • Email confirmation from @meridianenergy.co.nz of EAC Course completion
      • Evidence must be valid and visible date
        • showing course completion of Vector NSI or Vector WTC 2
        • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number
    • Assessment Completion date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR Colour copy or black and white copy
    • Copy must be clear and legible
    If
    • is acceptable

    Where the evidence completion date exceeds 2 years or has expiredyear, an additional refresher or course completion of eithercertificate showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing
      • completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”Email confirmation from @meridianenergy.co.nz of EAC Course completion
    • course completion of Vector NSI or Vector WTC 2
    • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUSTbe provided

    Issue Date= On evidenceThe course date

    Expiry

    date

    Date =

    On evidence or

    2 years from issue date

    Power.
    Anchor
    109109Document.Vector Electricity Core Instruction WTC3

    The evidence will be

    one of the following:

        • Certificate or competency
        • card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
        • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy
    • is acceptable

    Where the evidence completion date exceeds 2

    year, an additional

    certificate showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of
    • Vector WTC 3
    • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Removed

    Image Removed


    Electrical.Accreditation.Unison Declaration of Competency to accessTelecommunications Operator.Competency.Chorus WTC3 - Overhead Network and NC or NZCESL2

    Power.Document.Vector Electricity Core Instruction WTC 5

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • course completion of Vector WTC 5
        • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date

    exceeds 2

    year,

    an additional certificate

    showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing
    		NEEDS CHECKING
    • course completion of Vector WTC 5
    • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Power.Document.Vector Electricity Core Instruction WTC 6

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of
        • Vector WTC 6
        • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing

    one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of
    • Vector WTC 6
    • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Power.Course.Powerco High Voltage Isolation & Access ProceduresDocument.Vector Electricity Core Instruction WTC7

    Anchor
    110112110
    112

    The  The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures Attendance record from a NZQA training organisation showing Powerco HVIAP
      • Course Completion
        • Vector WTC 7
        • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Pass Number MUST be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing on one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access ProceduresAttendance record card issued from a NZQA accredited training organisation showing Powerco HVIAP – must show PASS numbershowing course completion of Vector WTC 7
    • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue dateImage Removed
    Power.Course.Powerco Operational CommunicationDocument.Vector Electricity Core Instruction WTC 7A

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational CommunicationAttendance record from a NZQA training organisation showing Powerco Operational communication
      • Course Completion
        • Vector WTC 7A
        • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing on one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational CommunicationAttendance record from a NZQA training organisation showing Powerco Operational communicationVector WTC 7A
    • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Image Removed


    Power.Document.

    Vector Electricity Core Instruction WTC 8

    The

    evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
        • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions

    Issue Date:= Date signed

    •Expiry Date: Not required

    Image Removed

    • of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
    • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Power.Document.Vector Electricity Core Instruction WTC 8A

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector
        • WTC 8A
        • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing

    one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
    • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date =

    On evidence

    Expiry     		date= On evidence or 2 years from issue date

    Image Removed


    Power.

    Document.Vector

    Electricity Core Instruction WTC 8B

    Anchor

    113

    113

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of
        • Vector WTC
        • 8B
        • Mita Consulting letter showing attendance for Vector
        • WTC 8B Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector
    • WTC
    • 8B
    • Mita Consulting letter showing attendance for Vector
    • WTC 8B Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date =

    On evidence

    Expiry     		date= On evidence or 2 years from issue date

    Image Removed


    Power.Document.Vector Electricity Core Instruction

    WTC 8C

    The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC
        • 8C
        • Mita Consulting letter showing attendance for Vector WTC
        • 8C Course with a M – Met Vector Requirements
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC
    • 8C
    • Mita Consulting letter showing attendance for Vector WTC
    • 8C Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date

    Power.Document.Vector Electricity Core Instruction WTC 510

    The  The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5Mita Consulting letter showing attendance 10
        • Downer form for Vector WTC 5 Course with a M – Met Vector Requirements
      • Assessment Completion and expiry date must be visible
        • Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or Can be in colour copy OR black and white copy is acceptable

    Where the evidence completion date exceeds 2 yearyears, an and additional certificate showing one of the following

    Certificate or competency card

    issued from a

    NZQA accredited training organisation showing course completion of Vector WTC 5Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements

    NZQA  showing Vector WTC 10 MUST be provided

    Issue Date = On evidence

    Expiry date= On evidence or 2 years from issue date
    Power.Document.Vector Electricity Equipment Type Assessment

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • completion of Vector
        • Electricity Equipment Type Assessment 
        • Vector Electricity Equipment Type Assessment 
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date =

    as per evidence

    Expiry date=     		as per evidence

    Power.Document.Vector Electricity

    Anchor
    112

    3 site visits

     The evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC
        • 7A
        • Mita Consulting letter showing attendance for Vector WTC
        • 7A Course with a M – Met Vector Requirements
        • Log book showing 3 site visits with manager/supervisor sign off
    • Assessment Completion and expiry date must be visible
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or black and white copy is acceptable

    Issue Date = On evidence

    Expiry date=     		Power.Document.Vector Electricity Core Instruction WTC 7ANot required
    Electrical.Course.Wellington Electricity - U/G Switchgear Types up to 33kV

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7AMita Consulting letter showing attendance 10
        • Downer form for Vector WTC 7A Course with a M – Met Vector Requirements
      • Assessment Completion and expiry date must be visible
        • Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or Can be in colour copy OR black and white copy is acceptable

    Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

    • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7AMita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided

    Issue Date = On as per evidence

    Expiry date= On evidence or 2 years from issue date

    Power.Document.Vector Electricity Core Instruction WTC 8

    		as per evidence
    Electrical.Course.Wellington Electricity - Switchgear Types - LV Fuse Gear

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training
        • organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
        • Downer form for Wellington Electricity 
            • Must state Switchgear Types - LV Fuse Gear
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted
    • ).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = as per evidence

    Expiry date=

    Power.Document.Vector Electricity Core Instruction WTC 8A

    		as per evidence
    Electrical.Course.Wellington Electricity - Substation Switchgear Types up to 110kV

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • completion of
        • Wellington Electricity - Switchgear Types - LV Fuse Gear
        • Downer form for Vector WTC Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and
    • legible
    • Can be in colour copy OR black and white copy

    Issue Date =

    as per evidence

    Expiry date=
    Anchor
    113113as per evidence
    Electrical.Course.Wellington Electricity - Specialist Switchgear Types up to 11kV

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • completion of Vector WTC
        • 10
        • Downer form for Vector WTC
        • Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date =

    as per evidence

    Expiry date=

    Power.Document.Vector Electricity Core Instruction WTC 8C

    		as per evidence
    Electrical.Course.Wellington Electricity - Ripple Injection Plant Types

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing
        • completion of Vector WTC
        • 10
        • Downer form for Vector WTC
        • Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must
    • be clear and legible
    • Can be in colour copy OR black and white copy

    Issue Date = as per evidence

    Expiry date=

    Power.Document.Vector Electricity Core Instruction WTC 10

    		as per evidence
    Electrical.Course.Wellington Electricity - O/H Switchgear Types up to 33kV

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
        • Downer form for Vector WTC Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

    Where the evidence date exceeds 2 years, and additional certificate issued from a NZQA  showing Vector WTC 10 MUST be provided

    Issue Date = On as per evidence

    Expiry date= On evidence or 2 years from issue date    		Power.Document.Vector Electricity Equipment Type Assessment

    Power.Document.Vector Electricity 3 site visits

    		 The as per evidence
    Electrical.Course.Wellington Electricity - Capacitor bank plant types

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7AMita Consulting letter showing attendance 10
        • Downer form for Vector WTC 7A Course with a M – Met Vector Requirements
        • Log book showing 3 site visits with manager/supervisor sign off
      • Assessment Completion and expiry date must be visible
        • Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Colour copy or Can be in colour copy OR black and white copy is acceptable

    Issue Date = On as per evidence

    Expiry date= Not requiredas per evidence
    Electrical.Attestation.Wellington Electricity - Electrical Fitting

    The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
        • Downer form for Vector WTC Attestation
            • Must show Vector WTC 10
            • Must contain comments
            • Must be signed by manager
    • Where assessor / trainer signature section is shown on the evidence, this must be completed
    • Date of training completion must be visible
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    		Electrical.Course.Wellington Electricity - Switchgear Types - LV Fuse GearElectrical.Course.Wellington Electricity - Substation Switchgear Types up to 110kVElectrical.Course.Wellington Electricity - Specialist Switchgear Types up to 11kVElectrical.Course.Wellington Electricity - Ripple Injection Plant TypesElectrical.Course.Wellington Electricity - O/H Switchgear Types up to 33kVElectrical.Course.Wellington Electricity - Capacitor bank plant typesElectrical.Attestation.Wellington Electricity - Electrical Fitting

    Issue Date = as per evidence

    Expiry date= as per evidence