Page Comparison

Telecommunications Operator.Induction.Vodafone Health and Safety

The required evidence will be one of the following:

• • • Copy of email confirming course completion of Construct Safe Tier 1
    • Screenshot or website print-out confirming course completion / pass result of Construct Safe Tier 1
• Evidence must show ConstructSafe website URL or email from @constructsafe.co.nz
• Evidence must be valid and in date
• Evidence must show ID number
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= Not required

Telecommunications Operator.Module.Vodafone EMF/RF Awareness

The required evidence will be one of the following:

Issue Date= As shown on evidence

Expiry Date= Not required

Telecommunications Operator.Accreditation.Vodafone Individual Accreditation

Underground Services.Induction.Exxon Mobil Safety Passport

The evidence will be a:

• • Certificate showing Substation Entry (SE1) Level 1 course completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= Course completion date

The evidence will be a:

• • Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided

Issue Date= Course completion date

Expiry Date=2 years from course completion date

The evidence will be a:

• • Certificate showing Substation Entry (SE2) Level 2 Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date=Non-expiring

The evidence will be a:

• • Certificate showing Work Management course completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB)
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

• • Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided 

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
  • Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI)
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

• • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
  • Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail Induction
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail Individual Train Detection
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Underground Services.Licence.BeforeUdig

Underground Services.Induction.CentrePort Wellington

Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit

Electrical.Course.Ventia Risk Management

Water.Certificate.Watercare Customer Experience

Telecommunications Operator.Induction.Chorus Protect the Network

Telecommunications Operator.Induction.Horizon Network Safety

Telecommunications Operator.Induction.Kordia Site Access

Telecommunications Operator.Induction.Spark Protect the Network

Telecommunications Operator.Induction.Vocus Network Safety

Electrical.Induction.Powernet Network Access

Electrical.Induction.Unison Networks Safety

Electrical.Induction.WEL Network Safety

Electrical.Induction.Wellington Electricity Safe Work Practices

Electrical.Course.Meridian EAC

Electrical.Course.ScanPower - Close Approach

Health & Safety.Course.Construct Safe Tier 1

The required evidence will be one of the following:

• • • Copy of email confirming course completion of Construct Safe Tier 1
    • Screenshot or website print-out confirming course completion / pass result of Construct Safe Tier 1
• Evidence must show ConstructSafe website URL or email from @constructsafe.co.nz
• Evidence must be valid and in date
• Evidence must show ID number
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= Not required

Health & Safety.Course.Health and Safety Representative

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Health and Safety Representative Initial or US 29315
    • NZQA Record of Achievement showing completion of the following unit standards 29315
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy 

Issue Date= As shown on evidence

Expiry Date= Not required

Health & Safety.Course.Manual Handling

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Manual Handling
    • NZQA Record of Achievement showing completion of the following unit standards 17459
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements

• • Downer Water and Downer Automation – 3 years from completion date
  • Downer Power
    • Role Vesta.Wind Farm – 2 year refresher from completion date
    • All other roles – Non-expiring

Issue Date= Date of training completion

Expiry Date=

• • Downer Water and Downer Automation All Roles – 3 years from completion date
  • Downer Power Vesta.Wind Farm Role – 2 year refresher from completion date

All other roles – Non-expiring

Health & Safety.Course.Plant Isolation & Tagging (25043)

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Plant Isolation & Tagging or US 25043
    • NZQA Record of Achievement showing completion of the following unit standards 25043
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

Expiry Date= 2 years from completion date

Health & Safety.Course.Site Safe Passport

The required evidence will be a SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following:

• • Building Construction
  • Civil
  • Consultants
  • Passport Plus – height
  • Passport Plus – tools & Plants
  • Passport Plus – Worker Health & Passport Flexi
• Expiry date must be visible and current
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

If completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either:

• • Building Construction
  • Civil
  • Consultants
  • Passport Plus – height
  • Passport Plus – tools & Plants
  • Passport Plus – Worker Health & Passport Flexi

MUST be provided

Issue Date= Not Required

Expiry Date= As shown on the evidence (2 years from issue date)

Health & Safety.Course.Site Safe Supervisor Passport

The required evidence will be a SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following:

• • • Supervisor
    • Accident & Investigation
    • Risk Management
    • Training & Supervising Workers
    • Leadership in Safety
    • Health & Safety in Construction
• Expiry date must be visible and current
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

If completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either:

• • Supervisor
  • Accident & Investigation
  • Risk Management
  • Training & Supervising Workers
  • Leadership in Safety
  • Health & Safety in Construction    MUST be provided

Issue Date= Not Required

Expiry Date= As shown on the evidence (2 years from issue date)

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training showing completion of First Aid
  • NZQA Record of Achievement showing completion the following unit standards 6401 & 6402
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing 'first aid' MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

First Aid.Course.Transpower First Aid

The evidence will be a:

• • Certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component”
  • Certificate or competency card issued from a NZQA accredited training showing completion of First Aid
  • NZQA Record of Achievement showing completion the following unit standards 6401 & 6402
  • Screen shot from the EWRB website out showing first aid/CPR
• Issue or expiry date must be clear and visible
• Where assessor / instructor sections are shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 years, an additional certificate showing one of the following

• Certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component”
• Certificate or competency card issued from a NZQA accredited training showing completion of First Aid
• Screen shot from the EWRB website out showing first aid/CPR         MUST be provided

Issue Date= Course completion date

Expiry Date= 1 years from course completion date

High Risk Work.Course.Use of breathing apparatus

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training showing completion of 25044 or Wear and Operate compressed air breathing apparatus in the workplace
  • NZQA Record of Achievement showing completion the following unit standards 25044
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card showing 'first aid' MUST be provided

Issue Date= As shown on certificate

Expiry Date= 3 years from date of issue

Hazardous Substances.Course.Certified Handler

The required evidence will be one of the following:

• • • Approved Handler Test Certificate - Certificate Number must be visible
    • Compliance Certificate, type Certified handler - Number must be visible
• Issue and expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Must contain “hazardous Substance and New Organisms Act 1996”
• Certificate or competency card must be issued from a NZQA accredited training
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where completion date exceeds 5 years or has expired, an additional refresher or course completion of either

• • • Approved Handler Test Certificate - Certificate Number must be visible
    • Compliance Certificate, type Certified handler - Number must be visible

Issue Date= As shown on certificate

Expiry Date= 5 years from date of issue

Hazardous Substances.Course.Chlorine Gas Handler 6:1A

The required evidence will be one of the following:

• • • Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
    • Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible
• Issue and expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Must contain “hazardous Substance and New Organisms Act 1996”
• Certificate or competency card must be issued from a NZQA accredited training
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 5 years or has expired, an additional refresher or course completion of one of the following

• • • Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
    • Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible

MUST be provided

Issue Date= As shown on certificate

Expiry Date= 5 years from date of issue

Hazardous Substances.Course.Management & Handling of Hazardous Substances 31290 & 31293

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Management and Handling of Hazardous Substances US 31290 & 31293
  • NZQA Record of Achievement showing completion the following unit standards 31290 & 31293
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Must contain “hazardous Substance and New Organisms Act 1996”
• Certificate or competency card must be issued from a NZQA accredited training
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

Issue Date= As shown on certificate

Expiry Date= 3 years from date of issue

Fire Warden.Trained.Fire Awareness US3271, 4647

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 3271, 4647
  • NZQA Record of Achievement showing completion of the following unit standards 3271, 464
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible

Where the evidence completion date exceeds 2 years, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing refresher course completion of US 3271, 4647 MUST be provided

Issue Date = Date of Training completion.

The required evidence will be the following:

• • • Certificate issued from NZ Institute of Highway Technology showing course attendance for Understanding NZs3910:2013 Conditions of Contract
• Date of training completion must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date = Date of Training completion.

Agriculture.Course.Growsafe Basic

The required evidence will be a:

• • • Certificate showing “Growsafe Certified” “Basic Certificate”
• The evidence will be issued by a certified Growsafe
• Where chairman / general manager signature section is shown on the evidence, this must be completed
• Expiry date must be visible and current
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 5 years or has expired, an additional certificate showing

• • “Growsafe Certified” “Basic Certificate” MUST be provided

Issue Date= 5 years previous to expiry date

Expiry Date= As per certificate expiry date

Agriculture.Course.Growsafe Standard

The required evidence will be either a:

Where the evidence completion date exceeds 5 years or has expired, an additional certificate showing 

• • “Growsafe Certified” “Standard Certificate” MUST be provided

Issue Date= 5 years previous to expiry date

Expiry Date= As per certificate expiry date

Agriculture.Document.Growsafe - Registered Chemical Applicator

The required evidence will be a:

Where the evidence completion date exceeds 5 years or has expired, an additional certificate showing 

• • “Growsafe Certified” “Registered Chemical Applicator” MUST be provided

Issue Date= 5 years previous to expiry date

Expiry Date= As per certificate expiry date

Asbestos.Course.Asbestos Awareness

The required evidence will be a:

• • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Asbestos Awareness
• Date of training completion must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds Site (business unit) refresher cycle

• • Downer Corrections & Justice 2 years from course completion date
    • An additional certificate or competency card issued from a NZQA accredited training organisation showing Course Completion of Asbestos Awareness MUST be provided.
  • Downer Automation, Downer Defence, Downer Water NO expiry date
    • No additional certificate required

Issue Date= Course completion date

Expiry Date=

Downer Corrections & Justice 2 years from issue date 

Downer Automation, Defence, Water No expiry date

Water.Course.AC Pipe Handling

Water.Course.Backflow Prevention

Traffic Management.Course.Level 1 STMS

Traffic Management.Course.Level 2/3 STMS

Traffic Management.Course.Traffic Controller Basic

Traffic Management.Course.TTM Planner

Electrical.Licence.Registered with EWRB

The required evidence will be one of the following:

• • • Screen shot from the EWRB Website showing EWRB licence
    • EWRB card
• Must show completion date
• Must have valid expiry date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date = Date of training completion

Expiry Date = 2 year from completion of training 

Electrical.Licence.Registered with EWRB - Cable Jointer

The required evidence will be one of the following:

• • Screen shot from the EWRB Website showing EWRB Cable Jointer Licence
  • EWRB cable jointer card
• Must show completion date
• Must have expiry date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date = Date of training completion

Expiry Date = 2 year from completion of training 

Electrical.Licence.Registered with EWRB - Electrical Service Technician

The required evidence will be one of the following:

• • Screen shot from the EWRB Website showing EWRB Electrical Service Technician licence
  • EWRB Electrical Service Technician card
• Must show completion date
• Must have valid expiry date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date = Date of training completion

Expiry Date = 2 year from completion of training 

Electrical.Licence.Registered with EWRB - Electrician

The required evidence will be one of the following:

• • Screen shot from the EWRB Website showing EWRB Electrician licence
  • EWRB Electrician card
• Must show completion date
• Must have valid expiry date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date = Date of training completion

Expiry Date = 2 year from completion of training 

High Risk Work.Licence.PE Pipe Welding - Butt

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing completion of PE Pipe Welding - US 10987 or 31524 or Perform Butt Fusion Jointing on PE Pipe
  • NZQA Record of Achievement showing completion the following unit standards 10987 or 31524
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date = Date of training completion

Expiry Date = 2 year from completion of training 

Heavy Vehicle.Certificate.Forklift OSH

The required evidence will be one of the following:

• • Certificate of competency or competency card showing completion of an OSH forklift operators’ course or Operations and instructions of powered industrial lift trucks (forklifts)
• Issue and expiry date must be visible and current
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

Heavy Vehicle.Licence.Endorsement Class 2

The required evidence will be one of the following:

• • New Zealand drivers’ licence (Both sides of card) showing class 2
  • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Applicant’s name should be displayed on the licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Endorsement Class 3

The required evidence will be one of the following:

• • New Zealand drivers’ licence (Both sides of card) showing class 3
  • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Endorsement Class 4

The required evidence will be one of the following:

• • New Zealand drivers’ licence (Both sides of card) showing class 4
  • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Endorsement Class 5

The required evidence will be one of the following:

• • • New Zealand drivers’ licence (Both sides of card) showing class 5
    • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class 2 condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the licence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Endorsement Forklift

The required evidence will be one of the following:

• • • New Zealand drivers’ licence (Both sides of card) showing Forklift Endorsement
    • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class F condition as achieved
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Rollers Endorsement

The required evidence will be one of the following:

• • • New Zealand drivers’ licence (Both sides of card) showing class R condition as achieved and current
    • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class R condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Tracks Endorsement

The required evidence will be one of the following:

• • • New Zealand drivers’ licence (Both sides of card) showing class T condition as achieved and current
    • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class T condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Heavy Vehicle.Licence.Wheels Endorsement

The required evidence will be one of the following:

• • • New Zealand drivers’ licence (Both sides of card) showing class W condition as achieved and current
    • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class W condition as achieved within the past 4 weeks
• Expiry date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

The required evidence will be one of the following:

• • New Zealand drivers’ licence (Both sides of card) showing class D condition as achieved and current
  • Interim print-out evidence issued by NZ Transport Agency, signed by assessor, showing class D condition as achieved within the past 4 weeks
• Expiry and Issue date must be visible and current
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Date of birth must match the applicants DOB in the system.
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Not Required

Expiry Date: As shown on the evidence

If interim evidence was uploaded instead of licence, expiry date should be recorded as four weeks from the date of evidence issue date.

Plumber.Licence.PGDB - Plumber

The required evidence will be one of the following:

• • • Certificate or competency card issued from Plumbing, Gas, and Drainage Board – Registered Plumber
• Expiry date must be visible and current
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Licence registration date on evidence

Expiry Date: Expiry registration date on evidence (1 year from registration date)

Plumber & Gas Fitting Drainer.Licence.PGDB

The required evidence will be one of the following:

• • • Certificate or competency card showing registration licence issued from Plumbing, Gas, and Drainage Board
• Expiry date must be visible and current
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date: Licence registration date on evidence

High Risk Work.Course.Helicopter Lifting Safety Awareness

The required evidence will be one of the following:

• • • Course Completion Certificate from the New Zealand Fire Service – Helicopter Safety Awareness
    • NZQA Record of Achievement showing completion of the following either Unit Standard 9580 or, 32095
• Date of training completion or date of unit standard achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

High Risk Work.Course.Driving a quad bike (All Terrain Vehicle - ATV)

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Quad bike training/course
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white

Issue Date= Date of training completion

High Risk Work.Course.Heavy Four Wheel Drive

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Heavy Four-Wheel Drive Course
    • NZQA Record of Achievement showing completion of the following unit standards 1737, 1738, 17976, 17978
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white

If completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements

• • Downer OSM – no expiry date
  • All other sites – 3 years from completion date

An additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Heavy Four-Wheel Drive Course or refresher MUST be provided

• Issue Date= Date of training completion
• Expiry Date=
  • Downer OSM – no expiry date
  • All other sites – 3 years from completion date

High Risk Work.Course.Light Four Wheel Drive

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing US 17976, 17978
    • NZQA Record of Achievement showing completion of the following unit standards 17976, 17978
    • Chorus WTC 6 Remote Tracks Access or Refresher Certificate from a NZQA accredited training organisation
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date on NZQA record of achievement, certificate or competency card completion date exceeds an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • Light Four-Wheel Drive Course
  • Chorus WTC 6 Remote Tracks Access or Refresher Certificate MUST be provided

Issue Date= Date of training completion

High Risk Work.Course.Light Utility Vehicle

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing US 24553, 24556, 24558, 24560, 24562
  • NZQA Record of Achievement showing completion of the following unit standards 24553, 24556, 24558, 24560, 24562
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Where the evidence completion date exceeds site (Downer business units) refresher requirements
  • Downer OSM – no expiry
  • All other sites – 3 years from completion date

Issue Date= Date of training completion

Expiry Date=

• • Downer OSM – no expiry date
  • All other sites – 3 years from completion date

The required evidence will be one of the following:

• • Certificate or competency card issued from Licenced Building Practitioner, New Zealand Practicing Licensing
• Expiry date must be clear and visible
• Where the evidence completion date exceeds 5 years, an additional certificate or competency card issued from Licenced Building Practitioner, New Zealand Practicing Licensing MUST be provided
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Licence issue date on certificate 

Expiry Date= 5 years from issue date

The required evidence will be a:

• • Territorial Authorities certificate recognising Independent Qualified Person (IQP)
• Course completion date must be visible and current
• Approval Number should be displayed and visible
• District issuing must be visible
• Exipry date must be visable
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Licence issue date on certificate 

Expiry Date=As per certificate

Security.Access.Police Vetting Check

Security.Certificate.CCTV Security

High Risk Work.Course.ANZ Working at Heights - 17600, 25045, 23229

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 23229, 25045, 17600
    • NZQA Record of Achievement showing completion of the following unit standards 23229, 25045, 17600
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing US 23229, 25045, 17600 MUST be provided

Issue Date= Date of training completion

Expiry Date= 3 years from the date of training competition

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Height Advanced with transcript showing US 15757, 17600, 25045, 23229
    • NZQA Record of Achievement showing completion of the following unit standards 15757, 17600, 25045, 23229
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • • Working at Heights Advanced with transcript showing US 15757, 17600, 25045, 23229  
    • Working at Heights with US 15757, 17600, 25045, 23229 MUST be provided

Issue Date= Date of training completion

High Risk Work.Course.Working at Heights Advanced with Rescue - 23229, 15757, 17025, 10509

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights Advanced with Rescue with transcript showing US 23229, 15757, 176025, 10509
    • NZQA Record of Achievement showing completion of the following unit standards 23229, 15757, 176025, 10509
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • • Working at Heights Advanced with transcript showing US 23229, 15757, 176025, 10509  
    • Working at Heights with US 23229, 15757, 176025, 10509 MUST be provided

Issue Date= Date of training completion

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Height Electrical with transcript showing US 17025, 23229, 10509
    • Working at Heights with transcript showing US 17025, 23232, 10509
    • NZQA Record of Achievement showing completion of the following unit standards 17025, 23229, 10509
    • WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025, 23229, 10509 from a NZQA accredited training organisation
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

• • Working at Heights Electrical with transcript showing US 17025, 23232, 10509
  • Working at Heights with US 17025, 23232, 10509
  • WTC 5 Working at Heights Refresher Certification with transcript showing US 17025, 23229, 10509 MUST be provided

Issue Date= Date of training completion

High Risk Work.Course.Working at Heights Fall Arrest - 15757, 23229

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights Fall Arrest with transcript showing US 17025, 23229 or Certificate showing US 15757, 23229
    • NZQA Record of Achievement showing completion of the following unit standards 17025, 23229
    • WTC 5 Working at Heights Refresher Certificate from NZQA accredited training organisation
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • Working at Heights Fall Arrest with transcript showing US 15757, 23229
  • Working at Heights with US 15757, 23232

Issue Date= Date of training completion

The required evidence will be one of the following:

• • • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 15757, 17600
      • NZQA Record of Achievement showing completion of the following unit standards 15757, 17600
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • Working at Heights Horizontal and Vertical with transcript showing US 15757, 17600

Issue Date= Date of training completion

The required evidence will be one of the following:

• • • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17025 or Working at Heights Pole Top Rescue with transcript showing US 17025
      • NZQA Record of Achievement showing completion the following unit standards 17025
      • WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025 from NZQA accredited training organisation
      • WTC 3 Overhead Network with Fall Arrest or Refresher Certificate with transcript showing US 17025 from NZQA accredited training organisation
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • Working at Heights Pole Top Rescue with transcript showing US 17025
  • Working at Heights with US 17025
  • WTC 5 Working at Heights or Refresher Certificate with transcript containing US 17025
  • WTC3 Overhead Network with Fall Arrest or refresher with transcript containing US 17025, MUST be provided

Issue Date= Date of training completion

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 23232 or Working at Heights Rescue Planning with transcript showing 23232
    • NZQA Record of Achievement showing completion the following unit standard 23232
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • Working at Heights Rescue Planning with transcript showing 23232
  • Working at Heights with US 23232 MUST be provided

Issue Date= Date of training completion

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 23239 or Working at Heights Safety Harness
    • NZQA Record of Achievement showing completion the following unit standards 23239
    • WTC 5 Working at Heights or Refresher Certificate
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

• • • Working at Heights US23239
    • Working at Heights Safety Harness
    • WTC 5 Working at Heights or Refresher Certificate MUST be provided

Issue Date= Date of training completion

Expiry Date= 3 years from the date of training competition

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing Elevated Work Platforms. Any combination of the following Unit Standards 15757, 17600, 17025, 10509, 23229, 23232, 25045 must be visible on the certificate or combined with course transcript showing unit standards achieved
  • NZQA Record of Achievement showing completion of any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045
  • Chorus WTC 2 Elevated Work Platforms or Refresher Certificate combined with the course transcript showing Unit standards achieved/refreshed from a NZQA accredited training organisation
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standards achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

• • Certificate showing any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045
  • Chorus WTC 2 Elevated Work Platforms with course transcript and US achieved MUST be provided

Issue Date= Date of training completion

Expiry Date= 3 years from the date of training competition

High Risk Work.Course.Confined Space Awareness - 18426

Note this competency is for use within Downer Telco Site.

The required evidence will be one of the following:

• • NZQA Record of Achievement showing completion of the following unit standards 18426,
  • iSkills certificate showing Confined Space Awareness
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

Expiry Date= Not required

High Risk Work.Course.Confined Space Entry - 17599, 18426, 25510

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing Confined Space US 17599, 18426, 25510
    • NZQA Record of Achievement showing completion of the following unit standards 17599, 18426, 25510
    • Chorus WTC 4 Confined Spaces or Refresher Certificate from a NZQA accredited training organisation
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date on NZQA record of achievement, certificate, or competency card completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

Issue Date= Date of training completion

Expiry Date= 2 years from the date of training competition

High Risk Work.Course.Confined Space Entry with Fall Prevention - 15799, 18426, 25510, 19207

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing the completion of US 17599, 18426, 25510, 19025 or Confined Space Entry with Fall Prevention - Two Combined Certificates may be used and lowest expiry date is used.
    • NZQA Record of Achievement showing completion of the following unit standards 17599, 18426, 25510, 19025

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date on NZQA record of achievement, certificate or competency completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

• • Confined Space with Fall Prevention US 17599, 18426, 19025 (two combined certificates showing all US is acceptable – lowest expiry date is used) MUST be provided

Issue Date= Date of training completion

Expiry Date= 2 years from the date of training competition

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing Confined Space US 10507, 10508, 18038
    • NZQA Record of Achievement showing completion of the following unit standards 10507, 10508, 18038
    • Chorus WTC 4 Confined Spaces or Refresher Certificate with transcipt showing US 10507, 10508, 18038 from a NZQA accredited training organisation
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date on NZQA record of achievement, certificate, or competency card completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either

Issue Date= Date of training completion

Expiry Date= 2 years from the date of training competition

High Risk Work.Course.PE Pipe Welding - Electrofusion

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing completion of PE Pipe Welding - Electrofusion US 10980
  • NZQA Record of Achievement showing completion the following unit standards 10980
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

High Risk Work.Course.Rigging & Slinging

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing Rigging & Slinging showing US 3789 & 30072
  • NZQA Record of Achievement showing completion of the following unit standards 3789 & 30072
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

High Risk Work.Course.Load Slinging

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing Load Slinging Course US 30072
  • NZQA Record of Achievement showing completion of the following unit standards 30072
• Date of training completion or date of unit standard achieved must be
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

High Risk Work.Course.Truck Loader Crane

The required evidence will be one of the following:

• • Certificate or competency card issued from a NZQA accredited training organisation showing Truck Loader Crane US 16617
  • NZQA Record of Achievement showing completion of the following unit standard 16617
• Date of training completion or date of unit standard achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Date of training completion

High Risk Work.Course.Chainsaw

The required evidence will be either a:

• • Certificate or competency card issued from a NZQA accredited training organisation showing Chainsaw Course completion
  • NZQA Record of Achievement showing completion of the following unit standards 6916& 6917
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• If completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements
  • Downer OSM – no expiry date
  • All other sites – 3 years from completion date
• An additional certificate or competency card issued from a NZQA accredited training organisation showing Chainsaw course MUST be provided

Issue Date= Date of training completion

Expiry Date=

Downer OSM Site –

no expiry date

All other Sites –

3 years from completion date

High Risk Work.Course.Concrete Saw

The required evidence will be either a:

• • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Concrete Saw course
  • NZQA Record of Achievement showing completion of the following unit standards 26822 & 26823
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Where the evidence completion date exceeds business unit (site) refresher requirements
  • Downer OSM – no expiry date
  • All other sites – 3 years from completion date
    • An additional certificate or competency card issued from a NZQA accredited training organisation showing concrete saw course MUST be provided

Issue Date= Date of training completion

Expiry Date=

Downer OSM Site –

no expiry date

All other Sites –

3 years from completion date

High Risk Work.Unit Standard.17309 - Operate a wheeled loader on infrastructure works sites

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17309 - Operate a wheeled loader on infrastructure works sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.1737 - Drive a heavy vehicle on unsealed road surfaces

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US1737 - Drive a heavy vehicle on unsealed road surfaces
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.1738 - Drive a heavy vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US1738 - Drive a heavy vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17599 - Plan a confined space entry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17599 - Plan a confined space entry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17976 - DKO operating a light 4WD vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17976 - DKO operating a light 4WD vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17978 - Operate a light 4WD vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17978 - Operate a light 4WD vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18037 - Plan a confined space entry in the electricity supply industry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18037 - Plan a confined space entry in the electricity supply industry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18272 - Operate a mobile elevating work platform (MEWP) in the ESI

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18272 - Operate a mobile elevating work platform (MEWP) in the ESI
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18426 - DKO hazards associated with confined spaces

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18426 - DKO hazards associated with confined spaces
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.19207 - Work in a confined space in the infrastructure industry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US19207 - Work in a confined space in the infrastructure industry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.20875 - DKO slinging, lifting, moving, and placing loads using mobile plant

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US20875 - DKO slinging, lifting, moving, and placing loads using mobile plant
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.22279 - Operate a skid steer on infrastructure works sites

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US22279 - Operate a skid steer on infrastructure works sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23232 - Develop a rescue plan for recovery of a suspended individual after a fall

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • 23232 - Develop a rescue plan for recovery of a suspended individual after a fall
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24556 - DKO the safe operation of a light utility vehicle (LUV)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24556 - DKO the safe operation of a light utility vehicle (LUV)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.30072 - Demonstrate and apply knowledge of slinging regular loads safely

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US30072 - Demonstrate and apply knowledge of slinging regular loads safel
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.3789 - Sling varied regular loads and safely direct a crane during crane operations

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US3789 - Sling varied regular loads and safely direct a crane during crane operations
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.6916 - DKO the rules relating to chainsaw use

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US6916 - DKO the rules relating to chainsaw use
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.6917 - Demonstrate basic chainsaw operation

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US6917 - Demonstrate basic chainsaw operation
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.15757 - Use, install & disestablish temporary proprietary height safety systems

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US15757 - Use, install & disestablish temporary proprietary height safety systems
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23229 - Use safety harness system when working at height

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23229 - Use safety harness system when working at height
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Qualified.Previously hold crane operation unit standard

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • 16617 - Use a truck loader crane to lift & place regular loads
    • Date achieved MUST be Prior to  2010 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.21467 - Store and handle workplace chemicals

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US21467 - Store and handle workplace chemicals
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24559 - Operate a quad bike on rolling terrain

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24559 - Operate a quad bike on rolling terrain
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US 24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24561 - Operate a quad bike with trailed equipment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24561 - Operate a quad bike with trailed equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31290 - Knowledge of safe management and potential adverse effects of hazardous substances

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US 31290 - Knowledge of safe management and potential adverse effects of hazardous substances
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31293 - Safe handling, storage, and disposal of hazardous substances in the workplace

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US31293 - Safe handling, storage, and disposal of hazardous substances in the workplace
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US3800 - Use a radio remote or pendant controlled gantry crane to lift and place regular loads
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16617 - Use a truck loader crane to lift & place regular loads
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.10851 - Operate a powered industrial lift truck (forklift)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10851 - Operate a powered industrial lift truck (forklift)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Certificate of Competency.10 Standard Pressure Control

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.11 Complex Pressure Control

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US 30384, 30385

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Complex Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.12 Network Leakage Response

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

AND   NZQA Record of Achievement showing completion of the following unit standards:  US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of their Mito CoC card or MITO database screenshot showing expired Network Leakage Response

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

AND   NZQA Record of Achievement showing completion of the following unit standards: US30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect, and/or Reconnect

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.14 Gas Fitter - Gas Leakage Response on GMS <25m3/hr

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - Gas Leakage Response on GMS <25m3/hr

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.2 Safety Induction

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US497, 17593, 32105

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction AND a copy of their Mito CoC card or MITO database screenshot showing expired Safety Induction

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.3 Safe Working

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

AND   NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working AND a copy of their Mito CoC card or MITO database screenshot showing expired Safe Working

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.4 Gas Foundation

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Foundation

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation

Issue Date= Date application has been proceeded

Expiry Date= 2 years following issue date

Gas.Certificate of Competency.5 Replace GMS <25m3/hour

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour AND a copy of their Mito CoC card or MITO database screenshot showing expired Replace GMS <25m3/hour 

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour training

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.6 PE Pipelaying Only

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.7 Construct PE Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.8 Construct PE Mains

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.9 Construct Steel Mains and Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E1 PE Pipe Jointing Electro Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E10 Leakage Survey (Walking)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E11 Leakage Survey (Vehicle)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E12 Issue Work Permits

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E3 Hydrostatic Testing

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E4 Hot Tap Steel Pipe

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E5 Install CP Test Points

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E6 Odorant Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E7 Cathodic Protection Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E8 Mark-outs & Standovers

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E9 Valve Maintenance

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Unit Standard.10972 Perform hydrostatic tests on gas mains and services

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 10972 Perform hydrostatic tests on gas mains and services
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10975 Squeeze off a polyethylene pipe in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 10975 Squeeze off a polyethylene pipe in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10980 EF Jointing

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 10980 EF Jointing
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10981 Fit Mechanical couplings in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10981 Fit Mechanical couplings in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10982 DKO steel welding in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10982 DKO steel welding in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10983 Hot tap, test and drill a steel pipe

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10983 Hot tap, test and drill a steel pipe
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10984 Cut, thread and join steel pipes

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10984 Cut, thread and join steel pipes
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10987 Butt welding

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10987 Butt welding
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10988 Insert PE pipe for trenchless operation in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10988 Insert PE pipe for trenchless operation in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10992 Locate Pipes

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10992 Locate Pipes
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10993 Use a holiday detector

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 10993 Use a holiday detector
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.10995 Draft information for as-built drawings for a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10995 Draft information for as-built drawings for a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.11326 Symbols, Signs and Terminology

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US11326 Symbols, Signs and Terminology
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.11327 Respond to concerns/enquiries to industry operations

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 11327 Respond to concerns/enquiries to industry operations
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.11328 Gain approvals / notifications for works

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US11328 Gain approvals / notifications for works
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12456 Install, commission, maintain electronic flow correctors

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12456 Install, commission, maintain electronic flow correctors
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12502 Use pressure gauges and monitoring equipment

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12502 Use pressure gauges and monitoring equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12503 Respond to, locate and classify gas escapes

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12503 Respond to, locate and classify gas escapes
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12504 Perform walking leakage survey

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12504 Perform walking leakage survey
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12505 Perform vehicle leakage survey

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12505 Perform vehicle leakage survey
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12507 Use leak detector

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12507 Use leak detector
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12509 Install and test CP test points in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12509 Install and test CP test points in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12510 Install and change meters

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12510 Install and change meters
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12518 Check and maintain in-line valves in a gas pipeline

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12518 Check and maintain in-line valves in a gas pipeline
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12521 DKO pressure

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 12521 DKO pressure
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12522 DKO gas regulators

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12522 DKO gas regulators
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.12526 Use fresh air distance breathing apparatus

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US12526 Use fresh air distance breathing apparatus
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.17590 Issue worksite specific work permits

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17590 Issue worksite specific work permits
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.17593 Apply safe work practices

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17593 Apply safe work practices
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.17596 DKO safety observer responsibilities in the workplace

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17596 DKO safety observer responsibilities in the workplace
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.17690 Identify potential hazards of and safety precautions for working with live reticulated gas

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17690 Identify potential hazards of and safety precautions for working with live reticulated gas
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19543 Audit worksite systems

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19543 Audit worksite systems
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19549 Make temporary repairs of gas escapes in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19549 Make temporary repairs of gas escapes in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19550 Restore supply after interruption

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19550 Restore supply after interruption
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19551 Inspect and advise on works

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19551 Inspect and advise on works
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19552 Gas filled buildings

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19552 Gas filled buildings
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19553 DKO standard gas pressure control equipment

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19553 DKO standard gas pressure control equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19555 Assemble, install, test and commission

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19555 Assemble, install, test and commission
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19557 Perform maintenance on standard gas pressure

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19557 Perform maintenance on standard gas pressure
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.19560 Troubleshoot and rectify faults

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US19560 Troubleshoot and rectify faults
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.20590 Test for odour level and concentration

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 20590 Test for odour level and concentration
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.20869 DKO notifiable works and work permits typical of infrastructure work sites

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 20869 DKO notifiable works and work permits typical of infrastructure work sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.20877 Working Safely under TTM

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 20877 Working Safely under TTM
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.20878 Assist with TTM

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US20878 Assist with TTM
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.23086 Lay a Gas Pipe

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US23086 Lay a Gas Pipe
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.25610 Demonstrate knowledge of polyethylene pipe, fittings, and fusion jointing for a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US25610 Demonstrate knowledge of polyethylene pipe, fittings, and fusion jointing for a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30265 Apply health and safety risk assessment to a role

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US30265 Apply health and safety risk assessment to a role
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30367 DKO gas and risks and safety precautions for working with live gas

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30367 DKO gas and risks and safety precautions for working with live gas
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30370 DKO gas pipelines and networks

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30370 DKO gas pipelines and networks
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30371 DKO flow stopping in gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30371 DKO flow stopping in gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30374 Carry out a flow stopping operation using squeeze-offs

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30374 Carry out a flow stopping operation using squeeze-offs
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30377 Demonstrate knowledge of pigging

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30377 Demonstrate knowledge of pigging
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30379 Locate pipes and cables and advise on third party works in the vicinity of a gas pipeline

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US30379 Locate pipes and cables and advise on third party works in the vicinity of a gas pipeline
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30380 Interpret and use gas terminology

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US30380 Interpret and use gas terminology
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30382 Install and change low capacity gas measurement systems

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US30382 Install and change low capacity gas measurement systems
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30383 Restore supply and recommission a low capacity installation after interruption

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30383 Restore supply and recommission a low capacity installation after interruption
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30384 Assemble, install, test and commission a complex gas pressure control and metering station

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 30384 Assemble, install, test and commission a complex gas pressure control and metering station
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.30385 Maintain, troubleshoot and rectify faults

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US30385 Maintain, troubleshoot and rectify faults
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.31448 Operate & maintain small plant for infrastructure works

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US31448 Operate & maintain small plant for infrastructure works
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32035 Demonstrate and apply knowledge of excavation, backfill and compaction for a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US32035 Demonstrate and apply knowledge of excavation, backfill and compaction for a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32036 DKO cathodic protection

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US32036 DKO cathodic protection
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32037 Carry out cathodic protection system monitoring

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US32037 Carry out cathodic protection system monitoring
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32040 Collect and record gas metering data

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US32040 Collect and record gas metering data
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32041 DKO standard gas pressure control equipment and metering stations

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US32041 DKO standard gas pressure control equipment and metering stations
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32042 Describe gas metering equipment in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US32042 Describe gas metering equipment in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32105 Use PPE in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 32105 Use PPE in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32330 Perform a walking leakage survey in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 32330 Perform a walking leakage survey in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Unit Standard.32331 Perform a vehicle leakage survey in a gas network

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US 32331 Perform a vehicle leakage survey in a gas network
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date