Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleNetwork Specific


Competency Competency Requirements Upload RequirementsExamples

Telecommunications Operator.Induction.OneNZ Health and Safety

Anchor
101
101

The required evidence will be one of the following:

      • Certificate or competency card showing "Vodafone Health and Safety" OR "One NZ Health and Safety Induction" as minimum
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= 2 years from issue date

Telecommunications Operator.Module.OneNZ EMF/RF Awareness

The required evidence will be a:

      • Certificate or competency card showing EMF/RF Awareness course completion
  • Issue date must be clear and current
  • Must show assessment pass result
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years or has expired, an additional certificate showing EMF/RF Awareness course completion MUST be provided

Issue Date= As shown on evidence

Expiry Date= 3 years from issue date

Telecommunications Operator.Accreditation.OneNZ Individual Accreditation

The required evidence will be a:

      • Vodafone OR One NZ “Individual Accreditation Application”
  • Expiry is 2 years from receiving evidence
  • All sections must be filled out
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= 2 years from issue date

Underground Services.InductionLicence.Exxon Mobil Safety Passport

The evidence will be a:

        • Certificate or competency card showing Safety Passport
  • Evidence will be issued by Exxon Mobile Only
  • Issue and expiry date must be clear and visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Safety Passport MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Certificate.Transpower Substation Entry SE1

Anchor
102
102

The evidence will be a one of the following:

    • Certificate showing Substation Entry (SE1) Level 1 course completion
    • Certificate showing TPSS 06.21 RAE Restricted Areas Entry course completion 
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 1 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Certificate.Transpower Substation Entry SE2

The evidence will be a one of the following:

    • Certificate showing Substation Entry (SE2) Level 2 course completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 2 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided

Issue date = as per document

Expiry date = 2 years after issue date


Power.Document.Transpower-SE2 On Job Assessment or Refresher Webinar(Tauranga substation)

The evidence will be a:

    • Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided

Issue Date= Course completion date

Expiry Date=2 years from course completion date

Power.Document.Transpower-SE2 On Job Assessment (Tauranga substation)

The evidence will be a:

    • Certificate showing Substation Entry (SE2) Level 2 Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date=Non-expiring

PowerElectrical.DocumentCertificate.Transpower Work Management WM

The evidence will be a:

    • Certificate showing Work Management course completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= 2 years from course completion date



Rail.Course.KiwiRail Electrification Awareness Basic (EAB)

Anchor
103
103

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB)
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz 
  • Evidence must show course completion date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided 

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Rail.Course.KiwiRail Electrification Awareness Intermediate (EAI)

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
    • Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI)
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
    • Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Rail.Course.Kiwirail Tunnel Operations practical training

The required evidence will be one of the following:

  • Training record issued by Kiwirail
  • Must mention ‘Tunnel Operations’ in the course detail section
  • Must have ‘Passed’ or ‘Achieved’ in ‘Course result’ section

 

  • Competency report issued by Kiwirail
  • Must mention ‘Tunnel Operations infrastructure’ or ‘Tunnel Operations recertification’
  • Expiry date must be valid

 

  • Screenshot of Kiwirail Learner portal
  • Must mention ‘Tunnel Operations infrastructure’ or ‘Tunnel Operations recertification’
  • Must show status ‘Competent’

 

  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce Management (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Completion date OR expiry date must be visible
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue date: As per evidence or if not stated in evidence, 2 years prior to expiry date.

Expiry date: As per evidence, or if not stated in evidence 2 years from issue date.


Rail.Course.Kiwirail Tunnel Operations theory module

The required evidence will be one of the following:

 

  • Screenshot of Kiwirail Learner portal
  • Must mention ‘Tunnel Operations (theory)’
  • Must show status ‘Competent’

 

  • Competency report issued by Kiwirail
  • Must mention ‘Tunnel Operations (theory)’
  • Expiry date must be valid

 

 

  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce Management (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Completion date OR expiry date must be visible
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue date: As per evidence or if not stated in evidence, 2 years prior to expiry date.

Expiry date: As per evidence, or if not stated in evidence 2 years from issue date.

 

Note: the theory module is to completed the year the Kiwirail Tunnel Operations practical training is not due. The expiry date of the Kiwirail Tunnel Operations theory module should fall the year after the expiry date of the most recent Kiwirail Tunnel Operations practical training completed by the same worker.


Rail.Induction.KiwiRail

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail Induction
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date= Course completion date

Expiry Date= Not required

Rail.Induction.KiwiRail Individual Train Detection

The required evidence will be either of the following:

    • Copy of email confirming course completion of KiwiRail Individual Train Detection
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection
  • Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
  • Evidence must be valid and in date
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Copy of email confirming course completion of KiwiRail Individual Train Detection issued by KiwiRail
    • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detectionissued by KiwiRail MUSTbe provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Underground Services.Licence.BeforeUdig

Anchor
104
104


The evidence will be a:

      • Certificate showing beforeUdig Certified Locator
  • Evidence will be issued by beforeUdig Certified Locator ONLY
  • Course Completion date must be visible
  • Where assessor /signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 3 years, an additional certificate showing beforeUdig Certified Locator MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Underground Services.Induction.CentrePort Wellington

The evidence will be one of the following

      • CentrePort Access Card
      • Certificate showing CentrePort Wellington Induction
  • Evidence will be issued by CentrePort ONLY
  • Expiry date must be visib
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence has expired, an additional certificate or card issued from CentrePort MUST be provided

Issue Date= Not required

Expiry Date= As per evidence

Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit

The evidence will be a:

      • Ventia Certificate of Achievement showing completing EDP/IPP Permit 
  • Evidence will be issued by Ventia ONLY
  • Course Completion date must be visible
  • VisRes ID number must be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing completing EDP/IPP Permit MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Electrical.Course.Ventia Risk Management

The evidence will be a:

      • Ventia Certificate of Achievement showing completing Risk Management 
  • Evidence will be issued by Ventia ONLY
  • Course Completion date must be visible
  • VisRes ID number must be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing Risk Management MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Water.CertificateCompetency.Watercare Customer Experience

Anchor
105
105

The evidence will be:

      • Watercare certificate showing recognition of "Customer Experience Training"  Course Certificate Number MUST be visible 
  • Evidence will be issued by Watercare ONLY
  • Expiry date MUST be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= As per certificate

Expiry Date=Not required


Water.Induction.Watercare

The evidence will be one of the following:

      • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
      • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
      • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible 
  • Evidence will be issued by Watercare ONLY
  • Expiry date MUST be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 years, an additional competency card of one of the following 

  • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
  • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
  • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible MUST be provided

Issue Date= 1 years prior to expiry date

Expiry Date= As per evidence

Electrical.Induction.Ventia Chorus Protect the Network

The evidence will be one of the following:

      • Certificate of Achievement showing recognition of Chorus - Protect The Network 
          • VisRes ID number and VNZ trainer name must be displayed
          • Course Completion date must be visible
      • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
          • Must be from visres.vspl.net website
          • Expiry date must be visible and current
  • Evidence will be issued by Ventia ONLY
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Telecommunications Operator.Induction.Spark or Chorus Protect the Network

The evidence will be one of the following:

  • Ventia Certificate of Achievement showing recognition of Chorus - Protect The Network
    • Course Completion date must be visible
    • VisRes ID number and VNZ trainer name must be displayed
  • Copy of PTN Training record in form of a table (see sample provided for this business rule. Excel file is acceptable). MUST DISPLAY
    • Date of training
    • Surname and First Name of attendee
    • Organisation of attendee
    • Have a tick in the PTN column
    • Name of the trainer
    • Expiry date is 2 years from date of training stated on PTN training record provided
  • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
    • Must be from vspl.netwebsite
    • Expiry date must be visible and current
  • Screenshot from Spark website showing under "My Achievements" course completion of PTN Accreditation Training
  • UCG certificate stating PTN Accreditation Training (2020)
    • Certificate number MUST be visible 
    • Must show "This module covers; Accreditation, Hazards, Work Plans, Security and Access, Human Error, Accreditation Assessment
  • Copy of a completed PTN – Site Access Accreditation test
    • Must have Chorus and Spark logo in the header of the document
    • Must display the date issued (date in header), the name of the candidate and company
    • Grade provided must be over 10/20
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

Issue Date= Course completion date/2 years prior to expiry date

Expiry Date= 2 years from course completion date/ evidence expiry date

Contractor.Authority.Chorus Access Card

The required evidence will be one of the following:

      • Chorus Access Card 
  • Must show "Chorus Access Card"
  • Must display image of worker
  • Expiry date must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence has expired, an additional card must be provided

Issue Date= Not required

Expiry Date= As Shown on evidence

Telecommunications Operator.Induction.Horizon Network Safety

Anchor
106
106

The evidence will be one of the following:

      • Horizon Network Safety Certificate 
  • Assessment Completion date or expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= As shown on evidence

Expiry Date= As Shown on evidence


Telecommunications Operator.Induction.Kordia Site Access

The required evidence will be a:

  • Issue date must be clear
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional Screenshot or email from Access@kordia.co.nz confirming Site Accredited MUST be provided

Issue Date= Course completion date

Expiry Date= 3 years from course completion date


Telecommunications Operator.Induction.Vocus Network Safety

The evidence will be:

      • Vocus Statement of Completion MUST be visible showing one of the following 
          • Vocus NZ Bunker site 
          • Vocus NZ Core Site
          • VDC-AKL
          • Vocus NZ Offices
  • Evidence will be issued by Vocus ONLY
  • Issued on AND Valid to MUST be visible 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 years, an additional Vocus Statement of Completion showing one of the following:

        • Vocus NZ Bunker site 
        • Vocus NZ Core Site
        • VDC-AKL
        • NZ Offices MUST be provided

Issue Date= The course completion date

Expiry Date = 1 years from issue date

Telecommunications Operator.Course.Chorus Remote Access Tracks (WTC 6)

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
      • NZQA Record of Achievement showing completion the following unit standards 17976, 17978
      • Chorus WTC 6 Remote Access Tracks or Refresher Certificate 
  • Date of training completion or date of unit standards achieved must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
      • Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date

Electrical.Induction.Powernet Network Access

Anchor
107
107

The evidence will be one of the following:

      • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
      • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
      • Certificate or competency card issued from Powernet stating “Network Access Certificate”
  • Assessment Completion date or expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
  • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
  • Certificate or competency card issued from Powernet stating “Network Access Certificate”  MUSTbe provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date

Electrical.Induction.Unison Networks Safety

The evidence will be one:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Unison OS1010 (Fibre)
  • Assessment Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 14 months, an additional certificate showing Attendance for “Unison OS1010 (Fibre)” MUST be provided

Issue Date= The course date

Expiry Date = 14 months from issue date

Electrical.Induction.Counties Power Network Safety

The evidence will be one of the following:

      • Counties Energy Limited Network Safety Induction from Counties Energy Network Access Authority(Applicant Limitations of Access)
      • Letter from Counties Energy Network
  • Assessment Completion date or expiry date must be visible
  • Work Type Competency authorization noted on letter
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
  • Certificate or competency card issued from Counties Power stating “Counties Power Authorised” MUSTbe provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date

Electrical.Induction.WEL Network Health & Safety Induction

The evidence will be one of the following:

      • Document CG-101 Health and Safety Standards for personnel working on WEL Network (snip of page 1 of document is acceptable as is a large document)
  • Assessment Completion date must be visible
  • Inductee name, Inductee organisation, WEL Facilitator and signature must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional CG-101 Document MUST be provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date


Electrical.Induction.WEL Network Outage & Access Management, Permits & Switching (NOAMPS)

The evidence will be one of the following:

      • Document OR-101 Network Outage & Access management, permits & switching (NOAMPS) on WEL Network (snip of page 1 of document is acceptable as is a large document)
      • AOAMPS advanced badge (Snip of document is accepted)
  • Assessment Completion date must be visible
  • Inductee name, Inductee organisation, WEL Facilitator must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional OR-101 Document MUST be provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date


Electrical.Course.Aurora Electrical Course Instruction

 The required evidence will be either of the following:

      • Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction
  • Evidence must be valid and in date
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Induction.Wellington Electricity Safe Work Practices

Anchor
108
108

The evidence will be:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction  MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Course.Wellington Electricity Permit Management

The required evidence will be one of the following:

        • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management
        • Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
  • Date of training completion must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Electrical.Induction.Waipa Networks

The evidence will be:

      • Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems
  • Assessment Completion date must be visible
  • Where Waipa Representative signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Applicant must have signed induction form
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUSTbe provided

Issue Date= Induction date on evidence

Expiry Date = 2 years from induction date

Electrical.Course.Meridian EAC

The required evidence will be one of the following:

    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites
    • Email confirmation from @meridianenergy.co.nz of EAC Course completion
  • Evidence must be valid and visible date
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Copy must be clear and legible
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date exceeds 2 years or has expired, an additional refresher or course completion of either

    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
    • Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Electrical.Course.ScanPower - Close Approach

Anchor
109
109

 The required evidence will be either of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
      • Email confirmation from @scanpower.co.nz of course completion of “close approach”
  • Evidence must be valid and in date
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date exceeds 2 years, an additional refresher or course completion of either

    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies”
    • Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Electrical.Accreditation.Unison Declaration of Competency to access Network

The evidence will be one of the following:

      • Unison Declaration of Competency to Access  
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date = as per evidence

Expiry date= as per evidence 

Telecommunications Operator.Competency.Chorus WTC3 - Overhead Network and NC or NZCESL2

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion

AND

      • NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion or date of unit standard achieved must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion MUST be provided


Power.Induction.Powerco Network Safety - Part A/B

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
      • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction  
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
  • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Course.Powerco High Voltage Isolation & Access Procedures

Anchor
110
110

The evidence will be one of the following:

      • Certificate or competency card showing course completion of a Powerco High Voltage Isolation and Access Procedures
      • Certificate must display the Powerco logo
  • Course Completion date must be visible
  • Pass Number MUST be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing on of the following

  • Certificate or competency card showing course completion of a Powerco High Voltage Isolation and Access Procedures
  • Attendance record showing Powerco HVIAP – PASS numberMUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Course.Powerco Operational Communication

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
      • Attendance record from a NZQA training organisation showing Powerco Operational communication
  • Course Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
  • Attendance record from a NZQA training organisation showing Powerco Operational communicationMUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Powerco WTC 5C Contractor Attestation

The required evidence will be:

      • Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
  • Must show Competency Class 5C Adjacent Communications Work
  • The evidence Must have Powerco’s Logo and match example document
  • The evidence Must have PDF format
  • Where “declaration completed by” must be filled out with Company, position, signature and date
  • Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Declaration must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date:= Date signed

•Expiry Date: Not required

Electrical.Induction.Vector Network Safety (WTC1)

The evidence will be one:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector Network Safety Induction or Vector WTC 1 Induction course
  • Assessment Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 year, an additional certificate showing Attendance for “Network Safety Induction” or “Vector Induction WTC 1” MUST be provided

Issue Date= The course date

Expiry Date = 2 years from issue date

Electrical.Induction.Vector Network Safety Induction (WTC 2)

Anchor
111
111

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
      • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number
  • Assessment Completion date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
  • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUSTbe provided

Issue Date= The course date

Expiry Date = 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC3

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
      • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
  • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 5

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
      • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
  • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 6 Attestation

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
      • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
  • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC7

Anchor
112
112

 The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
      • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
  • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 7AWTC7

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
      • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
  • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
      • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
  • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8A

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
      • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
  • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8B

Anchor
113
113

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
      • Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
  • Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 8C

The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
      • Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

  • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
  • Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Core Instruction WTC 10 Attestation

 The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence date exceeds 2 years, and additional certificate issued from a NZQA  showing Vector WTC 10 MUST be provided

Issue Date = On evidence

Expiry date= On evidence or 2 years from issue date

Power.Document.Vector Electricity Attestation Equipment Type Assessment

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector Electricity Equipment Type Assessment 
      • Vector Electricity Equipment Type Assessment 
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Power.Document.Vector Electricity WTC 1 Attestation with 3 site visits

 The evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
      • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
      • Log book showing 3 site visits with manager/supervisor sign off
  • Assessment Completion and expiry date must be visible
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = On evidence

Expiry date= Not required

Electrical.CourseEndorsement.Wellington Electricity - U/G Switchgear Types up to 33kV

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.CourseEndorsement.Wellington Electricity - Switchgear Types - LV Fuse Gear

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
      • Downer form for Wellington Electricity 
          • Must state Switchgear Types - LV Fuse Gear
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.CourseEndorsement.Wellington Electricity - Substation Switchgear Types up to 110kV

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.CourseEndorsement.Wellington Electricity - Specialist Switchgear Types up to 11kV

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.CourseEndorsement.Wellington Electricity - Ripple Injection Plant Types

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.CourseEndorsement.Wellington Electricity - O/H Switchgear Types up to 33kV

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.CourseEndorsement.Wellington Electricity - Capacitor bank plant types

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.AttestationWork Experience.Wellington Electricity - Electrical Fitting

The required evidence will be one of the following:

      • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
      • Downer form for Vector WTC Attestation
          • Must show Vector WTC 10
          • Must contain comments
          • Must be signed by manager
  • Where assessor / trainer signature section is shown on the evidence, this must be completed
  • Date of training completion must be visible
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy
  • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Expiry date= as per evidence

Electrical.Certificate.Transpower Permit Recipient

The evidence will be the following:

  • Certificate showing Permit Recipient For Lines (PRL) or (PR) completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Permit Recipient For Lines (PRL) or (PR) course completion MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Electrical.Refresher.Condition Assessor (CA) & (CAR)

The evidence will be a:

    • Certificate showing Condition Assessor or refresher Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Condition Assessor or refresher course completion MUST be provided

Issue Date= Course completion date

Expiry Date=2 years from course completion date


Electrical.Course.Transpower Field Operator (FO) or Electrical.Refresher.Maintenance Switcher (MS) & (MSF)

The evidence will be a:

    • Certificate showing Maintenance Switcher (MS) or Field Operator (FO) or refresher Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Maintenance Switcher (MS) or Field Operator (FO) or refresher course completion MUST be provided

Issue Date= Course completion date

Expiry Date=2 years from course completion date


Electrical.Course.Transpower Foundations (F)

The evidence will be a:

    • Certificate showing Foundations Curriculum Certificate
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible
  • Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date=Non-expiring


Electrical.Course.Transpower Vegetation Control (VC)

The evidence will be a:

    • Certificate showing Vegetation Control (VC) course completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible

Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Site.Authorisation.Transpower Land Authorisation

The evidence will be a:

·        Downer Letter authorisation to enter land from Transpower

  • Evidence will be issued by Downer ONLY
  • Issue date must be visible
  • Description of what authorisation covers, list of sites, Asset owner, Downer Contract Manager name and signature
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible

Colour copy or black and white copy is acceptable

Issue Date= Docuement completion date

Expiry Date= 1 years from course completion date


Electrical.Endorsement.Transpower Technical Expert Workshop

The evidence will be a:

    • Certificate showing Technical Expert course completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible

Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= 2 years from course completion date


Electrical.Competency.SF6 Gas - Test and Top-Up

The evidence will be a:

    • Certificate showing SF6 Test and Top-up course completion
  • Evidence will be issued by Gridskills ONLY
  • Course Completion date must be visible
  • Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Copy must be clear and legible

Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= Non-Expiring