Competency | Competency Requirements | Upload Requirements | Examples |
---|
Gas.Certificate of Competency.10 Standard Pressure Control | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Complex - Standard Pressure Control
AND NZQA Record of Achievement showing completion of | the following unit standards: US 30384, 30385the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Complex - Standard Pressure Control AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
| Complex - Standard Pressure control
- GANZ approval of qualification equivalent of
| Complex - Standard Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Complex - Standard Pressure Control
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.12 Network Leakage Response11 Complex Pressure Control | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage ResponseComplex Pressure Control
AND NZQA Record of Achievement showing completion of the following unit standards: US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334US 30384, 30385 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage ResponseComplex Pressure Control AND a copy of eithereither
- Mito CoC card or MITO database screenshot showing expired Network Leakage ResponseComplex Pressure control
- GANZ approval of qualification equivalent of Network Leakage ResponseComplex Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage ResponseComplex Pressure Control
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect12 Network Leakage Response | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or ReconnectNetwork Leakage Response
AND NZQA Record of Achievement showing completion of the following unit standards: US30370, 30382 US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 3204031448, 3204132035, 32042US32334 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or ReconnectNetwork Leakage Response AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect, and/or ReconnectNetwork Leakage Response
- GANZ approval of qualification equivalent of Gas Fitter - GMS Change, Disconnect, and/or ReconnectNetwork Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or ReconnectNetwork Leakage Response
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.14 13 Gas Fitter - Gas Leakage Response on GMS <25m3/hrGMS Change, Disconnect, and/or Reconnect | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr GMS Change, Disconnect, and/or Reconnect
AND NZQA Record of Achievement showing completion of the following unit standards: US12507, 19552 US30370, 30370, 30382, 30383, 32040, 32041, 32042 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hrGMS Change, Disconnect, and/or Reconnect AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Fitter - Gas Leakage Response on GMS <25m3/hrGMS Change, Disconnect, and/or Reconnect
- GANZ approval of qualification equivalent of Gas Fitter - Gas Leakage Response on GMS <25m3/hrGMS Change, Disconnect, and/or Reconnect
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr GMS Change, Disconnect, and/or Reconnect
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.2 Safety Induction14 Gas Fitter - Gas Leakage Response on GMS <25m3/hr | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND NZQA Record of Achievement showing completion of the following unit standards:
US497, 17593, 32105- US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety InductionGas Fitter - Gas Leakage Response on GMS <25m3/hr AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Safety InductionGas Fitter - Gas Leakage Response on GMS <25m3/hr
- GANZ approval of qualification equivalent of Safety InductionGas Fitter - Gas Leakage Response on GMS <25m3/hr
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety InductionGas Fitter - Gas Leakage Response on GMS <25m3/hr
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.3 Safe Working2 Safety Induction | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe WorkingSafety Induction
AND NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265 US497, 17593, 32105 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe WorkingSafety Induction AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Safe WorkingSafety Induction
- GANZ approval of qualification equivalent of Safe WorkingSafety Induction
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe WorkingSafety Induction
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.4 Gas Foundation3 Safe Working | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation Safe Working
AND NZQA Record of Achievement showing completion of the following unit standards: US10995 US3271, 113276401, 113286402, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 3204218426, 30265 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation Safe Working AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas FoundationSafe Working
- GANZ approval of qualification equivalent of Safe Working
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas FoundationSafe Working
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.5 Replace GMS <25m3/hour4 Gas Foundation | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour of Gas Foundation
AND NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour of Gas Foundation AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Replace GMS <25m3/hour Gas Foundation
- GANZ approval of qualification equivalent of GMS <25m3/hourSafe Working
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour trainingof Gas Foundation
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.6 PE Pipelaying Only5 Replace GMS <25m3/hour | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only of Replace GMS <25m3/hour
AND NZQA Record of Achievement showing completion of the following unit standards: US10995US5929, US1098810984, 1132812456, 2086919555, 2087719557, 2087819560, 2308630382, 25610, 30380, 31448, 3203530383, 32041 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only of Replace GMS <25m3/hour AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipelaying OnlyReplace GMS <25m3/hour
- GANZ approval of qualification equivalent of PE Pipelaying OnlyGMS <25m3/hour
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of SPE Pipelaying Only of Replace GMS <25m3/hour training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.7 Construct 6 PE ServicesPipelaying Only | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services Pipelaying Only
AND NZQA Record of Achievement showing completion of the following unit standards: US10975, 10981, 10988US10995, US10988, 11328, 20869, 20877, 20878, 23086, 25610, 3038230380, 31448, 32035, 32336, 32332, 32338 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE ServicesPipelaying Only AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct PE ServicesPipelaying Only
- GANZ approval of qualification equivalent of Construct PE ServicesPipelaying Only
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services SPE Pipelaying Only
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.8 7 Construct PE MainsServices | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE MainsServices
AND NZQA Record of Achievement showing completion of the following unit standards: US30371, 30374, 30377, 32335, 32339the following unit standards: US10975, 10981, 10988, 23086, 25610, 30382, 31448, 32035, 32336, 32332, 32338 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE MainsServices AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct PE MainsServices
- GANZ approval of qualification equivalent of Construct PE MainsServices
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE MainsServices
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.9 8 Construct Steel PE Mains and Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel PE Mains and Services
AND NZQA Record of Achievement showing completion of the following unit standards: US9550US30371, 1098230374, 1098430377, 1099332335, 32036, 3233732339 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel PE Mains and Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct Steel PE Mains and Services
- GANZ approval of qualification equivalent of Construct Steel PE Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel PE Mains and Services
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | E1 PE Pipe Jointing Electro Fusion9 Construct Steel Mains and Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| PE Pipe Jointing Electro Fusion - Construct Steel Mains and Services
AND NZQA Record of Achievement showing completion of the following unit standards: | US10980 US9550, 10982, 10984, 10993, 32036, 32337 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| PE Pipe Jointing Electro Fusion - Construct Steel Mains and Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
| PE Pipe Jointing Electro Fusion- Construct Steel Mains and Services
- GANZ approval of qualification equivalent of
| PE Pipe Jointing Electro Fusion- Construct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| PE Pipe Jointing Electro Fusion - Construct Steel Mains and Services
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | E10 Leakage Survey (Walking)E1 PE Pipe Jointing Electro Fusion | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Leakage Survey (Walking) - PE Pipe Jointing Electro Fusion
AND NZQA Record of Achievement showing completion of the following unit standards: | US32330US10980 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Leakage Survey (Walking) - PE Pipe Jointing Electro Fusion AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
| Leakage Survey (Walking)- PE Pipe Jointing Electro Fusion
- GANZ approval of qualification equivalent
| of Leakage Survey (Walking)- of PE Pipe Jointing Electro Fusion
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Leakage Survey (Walking)- PE Pipe Jointing Electro Fusion
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E11 E10 Leakage Survey (VehicleWalking) | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (VehicleWalking) training
AND NZQA Record of Achievement showing completion of the following unit standards: US32331US32330 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (VehicleWalking) training AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Standard Pressure controlLeakage Survey (Walking)
- GANZ approval of qualification equivalent of Standard Pressure controlof Leakage Survey (Walking)
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (VehicleWalking) training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E12 Issue Work PermitsE11 Leakage Survey (Vehicle) | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work PermitsLeakage Survey (Vehicle) training
AND NZQA Record of Achievement showing completion of the following unit standards: US17590US32331 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits Leakage Survey (Vehicle) training AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Issue Work PermitsStandard Pressure control
- GANZ approval of qualification equivalent of Issue Work PermitsStandard Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work PermitsLeakage Survey (Vehicle) training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt FusionE12 Issue Work Permits | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion of Issue Work Permits
AND NZQA Record of Achievement showing completion of the following unit standards: US10987 US17590 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control Issue Work Permits AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipe Jointing - Butt Fusion Issue Work Permits
- GANZ approval of qualification equivalent of PE Pipe Jointing - Butt Fusion Issue Work Permits
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion Issue Work Permits
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E3 Hydrostatic TestingE2 PE Pipe Jointing - Butt Fusion | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing PE Pipe Jointing - Butt Fusion
AND NZQA Record of Achievement showing completion of the following unit standards: US10972US10987 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing Standard Pressure Control AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Hydrostatic Testing controlPE Pipe Jointing - Butt Fusion
- GANZ approval of qualification equivalent of Hydrostatic Testing controlPE Pipe Jointing - Butt Fusion
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing PE Pipe Jointing - Butt Fusion
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E4 Hot Tap Steel PipeE3 Hydrostatic Testing | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe Hydrostatic Testing
AND NZQA Record of Achievement showing completion of the following unit standards: US10983US10972 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel PipeHydrostatic Testing AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Hot Tap Steel Pipe Hydrostatic Testing control
- GANZ approval of qualification equivalent of Hot Tap Steel Pipe Hydrostatic Testing control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe Hydrostatic Testing
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E5 Install CP Test PointsE4 Hot Tap Steel Pipe | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test PointsHot Tap Steel Pipe
AND NZQA Record of Achievement showing completion of the following unit standards: US12509US10983 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test PointsHot Tap Steel Pipe AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Install CP Test PointsHot Tap Steel Pipe
- GANZ approval of qualification equivalent of Install CP Test PointsHot Tap Steel Pipe
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points Hot Tap Steel Pipe
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E6 Odorant SurveyE5 Install CP Test Points | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey Install CP Test Points
AND NZQA Record of Achievement showing completion of the following unit standards: US 20590US12509 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey Install CP Test Points AND a copy of either either
- Mito CoC card or MITO database screenshot showing expired Odorant Survey Install CP Test Points
- GANZ approval of qualification equivalent of Odorant SurveyInstall CP Test Points
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey Install CP Test Points
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E7 Cathodic Protection E6 Odorant Survey | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Odorant Survey
AND NZQA Record of Achievement showing completion of the following unit standards: US32036, 32037US 20590 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Odorant Survey AND a copy of either either either
- Mito CoC card or MITO database screenshot showing expired Cathodic Protection Odorant Survey
- GANZ approval of qualification equivalent of Cathodic Protection Odorant Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 2 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey Odorant Survey
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E8 Mark-outs & StandoversE7 Cathodic Protection Survey | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & StandoversCathodic Protection Survey
AND NZQA Record of Achievement showing completion of the following unit standards: US30379US32036, 32037 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & StandoversCathodic Protection Survey AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
Mark-outs & Standovers- Cathodic Protection Survey
- GANZ approval of qualification equivalent of
Mark-outs & Standovers- Cathodic Protection Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & StandoversCathodic Protection Survey
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E9 Valve MaintenanceE8 Mark-outs & Standovers | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance Mark-outs & Standovers
AND NZQA Record of Achievement showing completion of the following unit standards: US12518US30379 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve MaintenanceMark-outs & Standovers AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
Valve Maintenance - Mark-outs & Standovers
- GANZ approval of qualification equivalent of
Valve Maintenance - Mark-outs & Standovers
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance Mark-outs & Standovers
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | Construction Service Laying – Grandfather / QualificationE9 Valve Maintenance | The required evidence will be one | of the following:NZQA of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance
AND NZQA Record of Achievement showing completion of the following | Qualification: National Certificate in Gas Networks Construction Service Laying Level 3unit standards: US12518 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construction Service Laying - Valve Maintenance AND a copy of
| either- either
- Mito CoC card or MITO database screenshot showing expired
| Construction Service Laying- Valve Maintenance
- GANZ approval of qualification equivalent of
| Construction Service Laying- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour
| copy OR black and white copy- copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.Construction of Mains and Services - Service Laying – Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Networks Construction Service Laying Level 3
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construction of Mains and ServicesService Laying AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construction of Mains and ServicesService Laying
- GANZ approval of qualification equivalent of Construction of Mains and ServicesService Laying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Construction Pipelaying of Mains and Services - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construction Pipelaying of Mains and Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construction Pipelayingof Mains and Services
- GANZ approval of qualification equivalent of Construction Pipelayingof Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Construction Service Laying – Pipelaying - Grandfather / Equivalent Qualification | The required evidence will be one of the following: NZQA Record of Achievement showing completion of the following Qualification : National Certificate in Gas Networks Construction Service Laying Level 3- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construction Service LayingPipelaying AND either a copy of either
- Mito CoC card or MITO database screenshot showing expired Construction
Service Laying- Pipelaying
- GANZ approval of qualification equivalent of Construction
Service Laying- Pipelaying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency. | CP Survey - Grandfather Construction Service Laying – Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Networks Construction Service Laying Level 3
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Cathodic Pressure (CP) Survey- Construction Service Laying AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
| Cathodic Pressure (CP) Survey- Construction Service Laying
- GANZ approval of qualification equivalent of
| Cathodic Pressure (CP) Survey- Construction Service Laying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency. | GMS Disconnection/Reconnection - GrandfatherCP Survey - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| GMS Disconnection/Reconnection- Cathodic Pressure (CP) Survey AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
| GMS Disconnection/Reconnection- Cathodic Pressure (CP) Survey
- GANZ approval of qualification equivalent of
| GMS Disconnection/Reconnection- Cathodic Pressure (CP) Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.GMS | Leakage Response Disconnection/Reconnection - Grandfather | / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of GMS
| Leakage Response- Disconnection/Reconnection AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired GMS
| Leakage Response- Disconnection/Reconnection
- GANZ approval of qualification equivalent of GMS
| Leakage Response- Disconnection/Reconnection
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.GMS Leakage Survey – Response - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 12507, 12504 (Walking) and/or 12505 (Vehicle)Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of GMS Leakage SurveyResponse AND either a copy of their
- Mito CoC card or MITO database screenshot showing expired GMS Leakage SurveyResponse
- GANZ approval of qualification equivalent of GMS Leakage SurveyResponse
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Mark Out, Stand-Overs and Location Leakage Survey – Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 10992, 1955, 20877, 20878 or 562712507, 12504 (Walking) and/or 12505 (Vehicle)
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark Out, Stand-Overs and Location Leakage Survey AND either a copy of
- Mito CoC card or MITO database screenshot showing expired
Mark Out, Stand-Overs and Location Survey - Leakage Survey
- GANZ approval of qualification equivalent of
Mark Out, Stand-Overs and Location - Leakage Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Network Advanced Pressure Control - Grandfather / Equivalent Qualification The required evidence will be:Mark Out, Stand-Overs and Location Survey – Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 10992, 1955, 20877, 20878 or 5627
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Advanced Pressure ControlMark Out, Stand-Overs and Location Survey AND either a copy of either
- Mito CoC card or MITO database screenshot showing expired Network Advanced Pressure ControlMark Out, Stand-Overs and Location Survey
- GANZ approval of qualification equivalent of Network Advanced Pressure ControlMark Out, Stand-Overs and Location Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Network Operations Advanced Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network OperationsAdvanced Pressure Control AND a copy of their either
- Mito CoC card or MITO database screenshot showing expired Network OperationsAdvanced Pressure Control
- GANZ approval of qualification equivalent of etwowNetwork Operationsof Network Advanced Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Network Standard Pressure Control - GrandfatherOperations - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Standard Pressure ControlOperations AND a copy of their
- Mito CoC card or MITO database screenshot showing expired Network Standard Pressure ControlOperations
- GANZ approval of qualification equivalent ofof Network Operations
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Odorant Survey - GrandfatherNetwork Standard Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant SurveyNetwork Standard Pressure Control AND a copy of their either
- Mito CoC card or MITO database screenshot showing expired
Odorant Survey- Network Standard Pressure Control
- GANZ approval of qualification equivalent of Network Standard Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Certificate of Competency.Odorant Survey – - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level AND Unit Standards: 12507, 20590
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Odorant Survey
- GANZ approval of qualification equivalent of Odorant Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.Induction.Authorised Restricted Access Induction | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Authorised Restricted Access Induction
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPLCertificate of Competency.Complex Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control AND a copy of either
- Copy of their Mito CoC card or MITO database screenshot showing expired Complex Pressure Control
- GANZ approval of overseas qualification equivalent of Complex Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPL.Certificate of Competency.Construct PE Mains - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE MainMains AND a copy of either
- Copy of their Mito CoC card or MITO database screenshot showing expired Construct PE
Main- Mains
- GANZ approval of overseas qualification equivalent of Construct PE
Main
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPLCertificate of Competency.Construct Steel Mains and Services - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services ANDa copy of eitherCopy of their
- Mito CoC card or MITO database screenshot showing expired Construct Steel Mains and Services
- GANZ approval of overseas qualification equivalent of Construct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPLCertificate of Competency.Gas Fitter - GMS Change, Disconnect and/or Reconnect - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect and/or Reconnect AND a copy Copy of their either
- Mito CoC card or MITO database screenshot showing
expired - expired Gas Fitter - GMS Change, Disconnect and/or Reconnect
- GANZ approval of overseas qualification equivalent of Gas Fitter - GMS Change, Disconnect and/or Reconnect
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPLCertificate of Competency.Gas Fitter – Gas Leakage Response on GMS <25m3/hr Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of AND a copy of their Mito CoC card or MITO database screenshot showing expired
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPLCertificate of Competency.Network Leakage Response - Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of AND a copy of their Mito CoC card or MITO database screenshot showing expired
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPL.Odorant Survey - Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of AND a copy of their Mito CoC card or MITO database screenshot showing expired
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|
Gas.RPL.Standard Pressure Control - Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of AND a copy of their Mito CoC card or MITO database screenshot showing expired
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
|
|