Content Comparison

The required evidence will be one of the following:

• • • Certificate or competency card showing Vodafone Health and Safety course completion
• The evidence will be issued by Vodafone
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= As shown on evidence

Expiry Date= 2 years from issue date

Telecommunications Operator.Module.Vodafone EMF/RF Awareness

The required evidence will be a:

• • • Certificate or competency card showing EMF/RF Awareness course completion

• Issue date must be clear and current
• Must show assessment pass result
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years or has expired, an additional certificate showing EMF/RF Awareness course completion MUST be provided

Issue Date= As shown on evidence

Expiry Date= 3 years from issue date

Telecommunications Operator.Accreditation.Vodafone Individual Accreditation

The required evidence will be a:

• Vodafone “Individual Accreditation Application”
• The evidence will be issued by Vodafone
• Expiry is 2 years from receiving evidence
• All sections must be filled out
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Underground Services.Induction.Exxon Mobil Safety Passport

The evidence will be a:

• • • • Certificate or competency card showing Safety Passport
• Evidence will be issued by Exxon Mobile Only
• Issue and expiry date must be clear and visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Safety Passport MUST be provided

The evidence will be a one of the following:

• • Certificate showing Substation Entry (SE1) Level 1 course completion
  • Certificate showing TPSS 06.21 RAE Restricted Areas Entry course completion 
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= Course completion date

The evidence will be a:

• • Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided

Issue Date= Course completion date

Expiry Date=2 years from course completion date

The evidence will be a:

• • Certificate showing Substation Entry (SE2) Level 2 Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date=Non-expiring

The evidence will be a:

• • Certificate showing Work Management course completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB)
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz 
• Evidence must show course completion date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

• • Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided 

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
  • Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI)
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

• • Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI)
  • Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail Induction
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

Issue Date= Course completion date

Expiry Date= 2 years from course completion dateNot required

The required evidence will be either of the following:

• • Copy of email confirming course completion of KiwiRail Individual Train Detection
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection
• Evidence must show KiwiRail website URL or email from @kiwirail.co.nz
• Evidence must be valid and in date
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

• • Copy of email confirming course completion of KiwiRail Individual Train Detection issued by KiwiRail
  • Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detectionissued by KiwiRail MUSTbe provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The evidence will be a:

• • • Certificate showing beforeUdig Certified Locator

• Evidence will be issued by beforeUdig Certified Locator ONLY
• Course Completion date must be visible
• Where assessor /signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 3 years, an additional certificate showing beforeUdig Certified Locator MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Underground Services.Induction.CentrePort Wellington

The evidence will be one of the following

• • • CentrePort Access Card
    • Certificate showing CentrePort Wellington Induction

• Evidence will be issued by CentrePort ONLY
• Expiry date must be visib
• Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence has expired, an additional certificate or card issued from CentrePort MUST be provided

Issue Date= Not required

Expiry Date= As per evidence

Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit

The evidence will be a:

• • • Ventia Certificate of Achievement showing completing EDP/IPP Permit 

• Evidence will be issued by Ventia ONLY
• Course Completion date must be visible
• VisRes ID number must be visible 
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing completing EDP/IPP Permit MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

Electrical.Course.Ventia Risk Management

The evidence will be a:

• • • Ventia Certificate of Achievement showing completing Risk Management 

• Evidence will be issued by Ventia ONLY
• Course Completion date must be visible
• VisRes ID number must be visible 
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing Risk Management MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The evidence will be:

• • • Watercare certificate showing recognition of "Customer Experience Training"  Course Certificate Number MUST be visible 

• Evidence will be issued by Watercare ONLY
• Expiry date MUST be visible 
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= As per certificate

Expiry Date=Not required

The evidence will be one of the following:

• • • Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
    • Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
    • Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible 

• Evidence will be issued by Watercare ONLY
• Expiry date MUST be visible 
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 1 years, an additional competency card of one of the following 

• Watercare certificate showing recognition of "Networks - Contractor Induction"  Course Certificate Number MUST be visible 
• Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible 
• Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible MUST be provided

Issue Date= 2 1 years prior to expiry date

Expiry Date= As per evidence

The evidence will be one of the following:

• • • Certificate of Achievement showing recognition of Chorus - Protect The Network 
      • • VisRes ID number and VNZ trainer name must be displayed
        • Course Completion date must be visible
    • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
      • • Must be from visres.vspl.net website
        • Expiry date must be visible and current

• Evidence will be issued by Ventia ONLY
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The evidence will be one of the following:

• • • Ventia Certificate of Achievement showing recognition of Chorus - Protect The Network
      • • Course Completion date must be visible
        • VisRes ID number and VNZ trainer name must be displayed
    • Screen shot from VisRes SSP portal showing compliant for Chorus - PTN
      • • Must be from visres.vspl.net website
        • Expiry date must be visible and current
    • Screenshot from Spark website showing under "My Achievements" course completion of PTN Accreditation Training
      • • Must be from ako.spark.co.nz
        • Completed Date must be visible

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided

Issue Date= Course completion date/2 years prior to expiry date

Expiry Date= 2 years from course completion date/ evidence expiry date

Telecommunications Operator.Induction.Kordia Site Access

The required evidence will be a:

• • • Screenshot or email from Access@kordia.co.nz confirming Site Accredited
• Issue date must be clear
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional Screenshot or email from Access@kordia.co.nz confirming Site Accredited MUST be provided

Issue Date= Course completion date

Expiry Date= 3 years from course completion date

Telecommunications Operator.Induction.Vocus Network Safety

The evidence will be:

• • • Vocus Statement of Completion MUST be visible showing one of the following 
      • • Vocus NZ Bunker site 
        • Vocus NZ Core Site
        • VDC-AKL
        • Vocus NZ Offices

• Evidence will be issued by Vocus ONLY
• Issued on AND Valid to MUST be visible 
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 years, an additional Vocus Statement of Completion showing one of the following:

• • • • Vocus NZ Bunker site 
      • Vocus NZ Core Site
      • VDC-AKL
      • NZ Offices MUST be provided

Issue Date= The course completion date

Expiry Date = 1 years from issue date

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
    • NZQA Record of Achievement showing completion the following unit standards 17976, 17978
    • Chorus WTC 6 Remote Access Tracks or Refresher Certificate 
• Date of training completion or date of unit standards achieved must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion
    • Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be provided

Issue Date= The course completion date

Expiry Date = 2 years from issue date

The evidence will be one of the following:

• • • Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
    • Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
    • Certificate or competency card issued from Powernet stating “Network Access Certificate”

• Assessment Completion date or expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation”
• Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked
• Certificate or competency card issued from Powernet stating “Network Access Certificate”  MUSTbe provided

Issue Date= The course completion date

Expiry Date = 1 2 years from issue date

Electrical.Induction.Unison Networks Safety

The evidence will be one:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Unison OS1010 (Fibre)

• Assessment Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= The course date

Expiry Date = 1 years 14 months from issue date

The evidence will be one of the following:

• • • "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
    • Certificate or competency card issued from Counties Power stating “Counties Power Authorised”

• Assessment Completion date or expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 1 year, an additional certificate showing one of the following

• "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction
• Certificate or competency card issued from Counties Power stating “Counties Power Authorised” MUSTbe provided

Issue Date= The course completion date

Expiry Date = 1 years from issue date

Electrical.Course.Aurora Electrical Course Instruction

 The required evidence will be either of the following:

• • • Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction
• Evidence must be valid and in date
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

If completion date exceeds 2 years, an additional refresher or course completion of either

• Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard”
• Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The evidence will be:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction

• Course Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be one of the following:

• • • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management
      • Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
• Date of training completion must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The evidence will be:

• • • Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems

• Assessment Completion date must be visible
• Where Waipa Representative signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Applicant must have signed induction form
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUSTbe provided

Issue Date= Induction date on evidence

Expiry Date = 2 years from induction date

Electrical.Course.Meridian EAC

The required evidence will be one of the following:

• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
• Email confirmation from @meridianenergy.co.nz of EAC Course completion
• Evidence must be valid and visible date
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Copy must be clear and legible

If completion date exceeds 2 years or has expired, an additional refresher or course completion of either

• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
• Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided

Issue Date = On evidence

 The required evidence will be either of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
    • Email confirmation from @scanpower.co.nz of course completion of “close approach”
• Evidence must be valid and in date
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date exceeds 2 years, an additional refresher or course completion of either

• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies”
• Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided

Issue Date = On evidence

The required evidence will be one of the following:

• Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion

AND

• • • NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
    • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction  

• Course Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
• Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUSTbe provided

Issue Date = On evidence

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures
    • Attendance record from a NZQA training organisation showing Powerco HVIAP

• Course Completion date must be visible
• Pass Number MUST be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures
• Attendance record from a NZQA training organisation showing Powerco HVIAP – must show PASS numberMUSTbe provided

Issue Date = On evidence

Power.Course.Powerco Operational Communication

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
    • Attendance record from a NZQA training organisation showing Powerco Operational communication

• Course Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
• Attendance record from a NZQA training organisation showing Powerco Operational communicationMUST be provided

Issue Date = On evidence

The required evidence will be:

• • • Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
• Must show Competency Class 5C Adjacent Communications Work
• The evidence Must have Powerco’s Logo and match example document
• The evidence Must have PDF format
• Where “declaration completed by” must be filled out with Company, position, signature and date
• Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Declaration must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date:= Date signed

Electrical.Induction.Vector Network Safety (WTC1)

The evidence will be one:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector Network Safety Induction or Vector WTC 1 Induction course

• Assessment Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date= The course date

Expiry Date = 2 years from issue date

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
    • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number

• Assessment Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
• Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUSTbe provided

Issue Date= The course date

Expiry Date = 2 years from issue date

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
    • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
• Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.Document.Vector Electricity Core Instruction WTC 5

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
    • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
• Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.Document.Vector Electricity Core Instruction WTC 6

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
    • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
• Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

 The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
    • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
• Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
    • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
• Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.Document.Vector Electricity Core Instruction WTC 8

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
    • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8
• Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.Document.Vector Electricity Core Instruction WTC 8A

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
    • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A
• Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
    • Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
• Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.Document.Vector Electricity Core Instruction WTC 8C

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
    • Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C
• Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.Document.Vector Electricity Core Instruction WTC 10

 The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10
    • Downer form for Vector WTC Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence date exceeds 2 years, and additional certificate issued from a NZQA  showing Vector WTC 10 MUST be provided

Issue Date = On evidence

Power.Document.Vector Electricity 3 site visits

 The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A
    • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
    • Log book showing 3 site visits with manager/supervisor sign off

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date = On evidence