Versions Compared

Old Version 3

changes.mady.by.user Theodore Johnson

Saved on

compared with

New Version 4

changes.mady.by.user Theodore Johnson

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Amended SMIC Training competencies.


Expand
titleSafety

Anchor
safety
safety

Competency NameCompetency RequirementsUpload RequirementsExamples
Safety.-.Working with Children
  • WWCC Card to show applicants name that must match the name registered
  • Screenshot of the status from Working with Children Database accepted
  • WWCC Number must be listed
  • Black and white or colour copy acceptable

Further information around this can be found at: https://www.kidsguardian.nsw.gov.au/child-safe-organisations/working-with-children-check

  • Issue Date = As per evidence
  • Expiry Date = 5 years from Issue Date


Competency NameCompetency RequirementsUpload RequirementsExamples
Site.Induction.Sydney Metro Orientation Training SMOT

When A Sydney Metro Participant results record sheet (issued by Tafe) is uploaded:

  • Applicants name must be shown on paperwork
  • Black and white or colour copies accepted
  • This can be accepted as evidence of having completion this orientation (despite not clearly stating Sydney Metro Orientation Training) as all attendees who have received this results sheet have already complete the orientation training prior to being issued with this.
  • Course information in the first section of the form must be completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form is to have a trainer name and signature at the bottom of the page
  • If the Tafe issued SOA is uploaded with the specified units on competency then this will also be accepted


When a SMOT Daily Attendance Record sheet is uploaded:

  • Applicants name must be shown on paperwork
  • Black and white or colour copies accepted
  • Applicants signature must be shown

NOTE: SMIC form without Unique Student Identifier listed can be accepted.


When a SMOT Statement of Completion is uploaded:

  • Applicants name must be shown on paperwork
  • Will show Laing O'Rourke OR Lendlease and Pegasus Logos
  • Will show 'Project.Induction. Sydney metro Orientation Training Online Induction' as a delivered competency
  • Black and white or colour copies accepted


NOTE: LOR SSJ project induction attendance record is not acceptable for this competency. It's for the site induction which is different paperwork to the SMOT induction.

  • Pegasus Staff CLICK HERE for additional business rule information prior to completing file verification in Onsite Track Easy
  • Photo of the form can be accepted in lieu of actual scanned copy providing all information can still be clearly seen
  • Issue date = Date of completion / end date for training displayed on the induction paperwork
  • Start date can be used as issue date where there is no end date


Competency NameCompetency Requirements
OH&S-WHS.Induction.Construction ACT
OH&S-WHS.Induction.Construction NSW
OH&S-WHS.Induction.Construction NT
OH&S-WHS.Induction.Construction QLD
OH&S-WHS.Induction.Construction SA
OH&S-WHS.Induction.Construction TAS
OH&S-WHS.Induction.Construction VIC
OH&S-WHS.Induction.Construction WA


Competency NameCompetency RequirementsUpload RequirementsExamples
Working at Height.Qualified.Work safely at heightsRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Manual Handling.Qualified.Manual HandlingRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Confined Space.Qualified.Enter and Work in Confined SpacesRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Gas Tester.Qualified.Gas Test AtmospheresRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Health & Safety.Qualified.Health and Safety Representatives (HSR)
  • Issue Date = As per evidence
  • Expiry Date = None

Site Services.Qualified.Monitor and Evaluate NoiseRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Chemical Storage.Qualified.Hazardous Chemical Handling and StorageRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Underground Services.Qualified.Identify, Locate and Protect Underground ServicesRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
OH&S-WHS.Induction.Work safely in construction industryRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
Water.Qualified.Waterproofing course
  • 'Waterproofer' to be listed
  • Must be issued by State Government body and logo to be displayed
  • Must be a Contractor Licence (or registration in VIC)
  • Duration as per licence
  • Black & white or colour is acceptable

Issue Date = As per licence (if not displayed please leave blank

Expiry = As per licence




Expand
titleSMIC Training


Expand
titleDemolition

Anchor
smic-demolition
smic-demolition

Demolition Introduction Skills - Units of Competency

  • Unit of competency listed on certificate to match the competency name in Onsite
    • Unit of competency listed on document to match the competency name in Onsite

    When transcript (accepted in lieu of SOA) is uploaded:

  • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
  • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
  • Completion date or issue date must be displayed
    • Note: Temporary letter or receipt
    Competency NameCompetency RequirementsUpload RequirementsExamples
    CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industrySMIC Training - Demolition- Introduction

    When statement of attainment is uploaded:

    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      4. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      4. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    		When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None
    CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
    CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
    CPCCDE3017A - Select and use hand tools and equipment for demolition tasks

    Demolition Experienced Worker - Units of Competency

    When statement of attainment is uploaded:

    RTO Name, National Provider Code / RTO
  • Unit of competency listed on certificate to match the competency name in Onsite
  • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on

    When transcript (accepted in lieu of SOA) is uploaded:

  • Unit of competency listed on document to match the competency name in Onsite
    • When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None

    When transcript (accepted in lieu of SOA) is uploaded:

    Issue Date =Completion date - if listed on certificate (this completion date is always used when displayed

    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    If there is

    Competency NameCompetency RequirementsUpload RequirementsExamples
    CPCCCM2001A - Read and interpret plans and specificationsSMIC Training - Demolition -Experienced

    When statement of attainment is uploaded:

    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCCM2001A - Read and interpret plans and specifications
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks

    When transcript (accepted in lieu of SOA) is uploaded:

    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCCM2001A - Read and interpret plans and specifications
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    		When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None
    CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
    CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
    CPCCDE3018A - Select and use small plant and equipment for demolition tasks
    CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
    CPCCDE3017A - Select and use hand tools and equipment for demolition tasks

    Demolition Nominated Supervisor - Units of Competency

    ExamplesWhen

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the competency name in Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    be displayed
  • Unit of competency listed on document to match the competency name in Onsite
  • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry now be uploaded.When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None
    When transcript (accepted in lieu of SOA) )
  • Issue date - If only an issue date is listed please enter this as the issue date
    • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date within = None

    Competency NameCompetency RequirementsUpload RequirementsSMIC Training - Demolition - Nominated Supervisor

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      1. CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      4. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      5. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      6. CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
      7. CPCCBC4012B - Read and interpret plans and specifications
      8. CPCCDE4001A - Plan and prepare for activities on demolition sites
      9. CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
      10. CPCCDE4003A - Supervise individual activities on demolition sites
      11. CPCCDE4004A - Finalise demolition activities and supervise property handover

    When transcript (accepted in lieu of SOA) is uploaded:

    • be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
      3. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      7. CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
      8. CPCCBC4012B - Read and interpret plans and specifications
      9. CPCCDE4001A - Plan and prepare for activities on demolition sites
      10. CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
      11. CPCCDE4003A - Supervise individual activities on demolition sites
      12. CPCCDE4004A - Finalise demolition activities and supervise property handover


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will

    now be uploaded.

    		When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed
      • )
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date
    CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
    CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
    CPCCDE3018A - Select and use small plant and equipment for demolition tasks
    CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
    CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
    CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
    CPCCBC4012B - Read and interpret plans and specifications
    CPCCDE4001A - Plan and prepare for activities on demolition sites
    CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
    CPCCDE4003A - Supervise individual activities on demolition sites
    CPCCDE4004A - Finalise demolition activities and supervise property handover
    • = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None



    Expand
    titleCivil Construction

    Anchor
    smic-civilconstructionsmic-civilconstruction

    Civil Construction Introduction Skills - Units of Competency

    smic-civilconstruction

  • Unit of competency listed on certificate to match the competency name in Onsite
    • Training logoNo expiryUnit of competency listed on document to match the competency name in Onsite = NoneRIIWHS201D - Work safely and follow WHS policies and procedures
    Competency NameCompetency RequirementsUpload RequirementsExamples
    RIIRIS201D - Conduct local risk controlSMIC Training - Civil Construction - Introduction Skills Course

    When statement of attainment is uploaded:

    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised
    • Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. RIIRIS201D - Conduct local risk control
      2. RIIWHS201D - Work safely and follow WHS policies and procedures

    When transcript (accepted in lieu of SOA) is uploaded:

    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. RIIRIS201D - Conduct local risk control
      2. RIIWHS201D - Work safely and follow WHS policies and procedures


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    		When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date
    • = None



    Expand
    titleHeavy Haulage

    Anchor
    smic-heavyhaulage
    smic-heavyhaulage

    Civil Construction Introduction Skills - Units of Competency

    Competency NameCompetency RequirementsUpload RequirementsExamples
    TLIF0078 - Recognise motor vehicle road crash risks and post-crash actionsSMIC - Heavy Haulage - Introduction Skills

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the competency name in Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiryof Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. TLIF0078 - Recognise motor vehicle road crash risks and post-crash actions

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Unit of competency listed on document to match the competency name in Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. TLIF0078 - Recognise motor vehicle road crash risks and post-crash actions


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    		When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None