Versions Compared

Old Version 10

changes.mady.by.user Emily Cassidy (Unlicensed)

Saved on

compared with

New Version 11

changes.mady.by.user Emily Cassidy (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Expand
titleCertificates


Competency Name

Competency Requirements

Upload Requirements


Qualification - Certificate III in ESI  - Power Systems - Transmission Overhead

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Qualification code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo

**RTO registration must only have been current at the time of training completion / awarding the document

  • Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

  • Actual copy of certificate is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

Overseas qualifications are not accepted



  • Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date



Qualification - Electrical

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international qualifications: These will be escalated from Pegasus to the client for review and case by case approval


  • Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date



Advanced Diploma of ESI - Power SystemsAdvanced Diploma of ESI - Power Systems or
Certificate of Technology - Electrical or
Certificate of Competency (SEC		Potential equivalents or overseas qualifications are to be verified by the Network Operator you are undertaking work for and may not be accepted on all Networks.

Certificate IV in ESI - Power Systems Substations UET40512


Certificate IV Qualification and Statement/Transcript/Records of results




Expand
titleLicence


Competency NameCompetency RequirementsUpload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion



Expand
titleStatement of Attainment


Competency Name

Competency Requirements

Upload Requirements

Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion


Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion


Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion


Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion


Electrical.Statement of Attainment.UETTDRRF06 - Perform rescue from a live LV panel

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 13 months from date of training completion


Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion


Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion


Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment 

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation at ground near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniques

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.AHCPCM201A - Recognise plants

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UEENEE101A - Apply OHS regulations, codes and practices in the workplace

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsaws

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required


Electrical.Statement of Attainment.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required