Business Name and ABN needs to match. If it does not match, government certified evidence must be provided to link the ABN or business names together. This is ideally a letter or download from ABR showing the linkage.
We can accept ‘PTY LTD’ or ‘(Pty) Ltd’ in lieu of ‘Proprietary Limited’ when this is the only difference in the company name between what is shown on company compliance paperwork verse what’s shown in onsite
Minimum amount of $20 million dollars Australian for any one occurrence; Coverage amounts to be recorded; If less than $20 million (AUD) the contractor must upload a copy of the Insurance Schedule from their contract. Pegasus staff will check to see if the lower amount has been approved in the contract and matches the certificate of currency uploaded. If the coverage amount HAS been approved by Zinfra Jemena staff by email, this can also be accepted.
If the policy amount is not in AUD and the policy is worldwide, a conversion at the time of processing is to be completed to ensure the non-AUD amount is equal to or greater than the $20 million AUD amount OR the lower amount that approved.
USD converted to AUD amount of greater than the $20 million is acceptable when the policy applies for work conducted in Australia
Insurance must be current
Accepted Types
Requires Approval
NOT Accepted
IMPORTANT: The minimum amount of coverage MUST be for $20m Public and Product Liability.
If Public and Product Liability is not specifically listed it must be listed in the PDS or escalated to site for approval.
Public and Products Liability
Broad form Liability
General Liability
Business Liability
Legal Liability
Umbrella Liability
Commercial Liability
Third Party Liability
IMPORTANT: a Product Disclosure Statement (PDS) is required to be uploaded with the types of policies before escalation.
If PDS states Public & Product Liability coverage – the insurance and PDS needs to be uploaded together for approval
If the PDS does not specify Public Liability it will be escalated
IT Liability
Public Only
Product Only
Note: Insurance types can be listed in the limit section of the policy.
E.g. Under the Class or description, it may refer to General Liability however under the limit or interest insured section if it refers specifically to an accepted type listed above this would be deemed acceptable.
Issue Date = Coverage start date listed on policy
Expiry Date = Coverage end date listed on policy (If the policy is paid monthly the expiry will be set when the next payment is due)
Insurer = Insurer will be listed in policy content
Policy Number or Certificate Number = as specified on the policy
Item = Type of of coverage / policy (i.e., Public & Products Liability, Public Liability)
Amount Description = Same as item
Amount = as specific on policy
Expand
title
Professional Indemnity Insurance
Certification
Certification Requirements
Upload Requirements
Examples
Professional Indemnity Insurance
Anchor
professionalindemnityinsurance
professionalindemnityinsurance
Business Name needs to match. If it does not match, government certified evidence must be provided to link the business names together. This is ideally a letter or download from ABR showing the linkage
We can accept ‘PTY LTD’ or ‘(Pty) Ltd’ in lieu of ‘Proprietary Limited’ when this is the only difference in the company name between what is shown on company compliance paperwork verse what’s shown in onsite.
Must be current
Must state one of the accepted types as listed in the below table
If the policy does not list one of the accepted types a Product Disclosure Statement (PDS) is required before escalation.
If PDS states on of the accepted types – the insurance and PDS needs to be uploaded together for approval
If the PDS does not specify Professional Indemnity, it will be escalated
Minimum amount of $10 million dollars Australian for any one occurrence; Coverage amounts to be recorded; If less than $10 million (AUD) the contractor must upload a copy of the Insurance Schedule from their contract. Pegasus staff will check to see if the lower amount has been approved in the contract and matches the certificate of currency uploaded. If the coverage amount HAS been approved by Zinfra Jemena staff by email, this can also be accepted.
If the policy amount is not in AUD and the policy is worldwide, a conversion at the time of processing is to be completed to ensure the non-AUD amount is equal to or greater than the $10 million AUD amount OR the lower amount that approved.
USD converted to AUD amount of greater than the $10 million is acceptable when the policy applies for work conducted in Australia
Insurance must be current
Accepted Types
Professional Indemnity
Errors and Omissions
Professional Liability
Civil Liability
Issue Date = Coverage start date listed on policy
Expiry Date = Coverage end date listed on policy (If the policy is paid monthly the expiry will be set when the next payment is due)
Insurer = Insurer will be listed in policy content
Policy Number or Certificate Number = as specified on the policy
Item = Professional Indemnity
Amount Description = Same as item
Amount = as noted on the policy
Expand
title
Motor Vehicle Insurance
Certification
Certification Requirements
Upload Requirements
Examples
Motor Vehicle Insurance
Anchor
motorvehicleinsurance
motorvehicleinsurance
Certificate of Insurance / Confirmation of Insurance / Certificate of Currency / Confirmation of Placement for Motor Vehicle Insurance showing:
Name of insurer
Policy Number
Expiry date
Company name and ABN must match the details registered*. If it doesn’t match, government certified evidence must be provided to link the ABN or business names together. This is ideally a letter or a download from ABR showing the linkage or a Trust Deed.
Slight business name variations can be accepted when the ABN matches and the name difference is only slight (eg. Pegasus Aust and Pegasus Australia)
Minimum amount of $20 million (AUD) coverage (“Limit of Liability”; and “Limit of Indemnity”) for 3rd Party Liability / Legal Liability / 3rd Party Property / Road Risk Liability. If less than $20 million (AUD) the contractor must upload a copy of the Insurance Schedule from their contract. Pegasus staff will check to see if the lower amount has been approved in the contract and matches the certificate of currency uploaded. If the coverage amount HAS been approved by Zinfra Jemena staff by email, this can also be accepted.
If the policy amount is not in AUD and the policy is worldwide, a conversion at the time of processing is to be completed to ensure the non-AUD amount is equal to or greater than the $20 million AUD amount OR the lower amount that approved.
USD converted to AUD amount of greater than the $20 million is acceptable when the policy applies for work conducted in Australia
Must show vehicle/s insured or a reference to coverage for all vehicles similar to the examples shown below:
Accepted Types
CTP
Comprehensive
Motor Fleet
Third Party Property
Commercial Motor
Road Risk
Road Risk Liability
Yellow Cover – Road Risk Liability to 3rd parties
Issue Date = Start of coverage date listed on policy
Expiry Date = Coverage end date listed on policy (If the policy is paid on a monthly basis the expiry will be set when the next payment is due)
Insurer = Insurer will be listed in policy content
Policy Number = as specified on the policy
Item = As specified on policy <accepted type> Motor Vehicle Insurance
Amount Description = As specified on policy <3rd Party Liability / Legal Liability / 3rd Party Property/ Road Risk Liability>
Amount = as per policy (“Limit of Liability”; and “Limit of Indemnity”) (minimum of 20 million AUD) UNLESS the policy is for comprehensive, in which case the amount can be 0
Expand
title
Plant Liability Insurance
Certification
Certification Requirements
Upload Requirements
Examples
Plant & Equipment Insurance
Anchor
plantequipmentinsurance
plantequipmentinsurance
“Certificate of Insurance” or "Confirmation of Insurance” or “Certificate of Currency” for Plant & Equipment showing:
Name of insurer
Policy Number
Expiry date
Company name and ABN must match the details registered. If it doesn’t match, government certified evidence must be provided to link the ABN or business names together. This is ideally a letter or a download from ABR showing the linkage or a Trust Deed.
Slight business name variations can be accepted when the ABN matches and the name difference is only slight (eg. Pegasus Aust and Pegasus Australia)
Must also include a schedule of items covered and how much they are insured for (usually in table format)
Must show plant / equipment or vehicle/s insured or a reference to coverage for all vehicles similar to the examples shown below:
Accepted Types
Mobile Plant and Equipment
Vehicle
Yellow Cover – Road Risk Liability to 3rd parties
CTP
Comprehensive
Motor Fleet
Third Party Property
Commercial Motor
Road Risk
Road Risk Liability
Plant & Equipment – Industrial Special Plant with Road Risk Liability
* Requirement is that you have 3rd party property for your mobile plant that you drive on roads
Issue Date = Start of coverage date listed on policy
Expiry Date = Coverage end date listed on policy (If the policy is paid on a monthly basis the expiry will be set when the next payment is due)
Insurer = Insurer will be listed in policy content
Policy Number = As specified on the policy
Item = As specified on policy <accepted type> Motor Vehicle Insurance
Amount Description = As specified on policy <3rd Party Liability / Legal Liability / 3rd Party Property>
Amount = As per policy (“Limit of Liability”; and “Limit of Indemnity”)
Expand
title
Asbestos Liability Insurance
Certification
Certification Requirements
Upload Requirements
Examples
Asbestos Liability Insurance
Anchor
asbestosliabilityinsurance
asbestosliabilityinsurance
Business Name and ABN needs to match. If it does not match, government certified evidence must be provided to link the ABN or business names together. This is ideally a letter or download from ABR showing the linkage.
We can accept ‘PTY LTD’ or ‘(Pty) Ltd’ in lieu of ‘Proprietary Limited’ when this is the only difference in the company name between what is shown on company compliance paperwork verse what’s shown in onsite
Minimum amount of $20 million dollars Australian for any one occurrence; Coverage amounts to be recorded; If less than $20 million (AUD) the contractor must upload a copy of the Insurance Schedule from their contract. Pegasus staff will check to see if the lower amount has been approved in the contract and matches the certificate of currency uploaded. If the coverage amount HAS been approved by Zinfra Jemena staff by email, this can also be accepted.
If the policy amount is not in AUD and the policy is worldwide, a conversion at the time of processing is to be completed to ensure the non-AUD amount is equal to or greater than the $20 million AUD amount OR the lower amount that approved.
USD converted to AUD amount of greater than the $20 million is acceptable when the policy applies for work conducted in Australia
Insurance must be current
Issue Date = Coverage start date listed on policy
Expiry Date = Coverage end date listed on policy (If the policy is paid monthly the expiry will be set when the next payment is due)
Insurer = Insurer will be listed in policy content
Policy Number = as specified on the policy
Item = Type of coverage / policy (i.e., Asbestos Liability)