Page Comparison

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF007
• UETTDRRF10 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment. Joint, terminate and maintain low voltage underground polymeric cable

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRDU015
• UETTDRCJ26
• UETTDRCJ26A
• UETTDRCJ06B
• UETTDRCJ06A
• Passport document showing stamp for Underground Services Cat 2
• Tafe issued certificate displaying 'Underground Service Mains – Installation (Cat 2) Code – 31755’
• Tafe issued certificate or transcript displaying '7793BS - Cable jointing 1 - LV Polymeric' and '7793BT - Cable jointing 2 - HV Polymeric'
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  
• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
  • • Applicant Name
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows ‘UETTDRRF11 or UETTDRRF11A’ as having been achieved with:
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.

• Accepted Course Titles / Codes:

  • UETDREL002

  • UETTDREL13

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDREL006
• UETTDREL14
• UETTDREL14A
• UETTDREL04B
• UETTDREL04A
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDREL005
• UETTDREL16
• UETTDREL16A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Exception Note: For the below Roles the following course code can be accepted UETDREL006. 

• Pole Replacement - Apprentice Linesman
• Pole Replacement - Apprentice Electrical Technician

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Pegasus Staff click here to read additional crucial business rule information prior to file verification

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:

• UETDRAI005
• UETTDREL17
• UETTDREL17A

• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details.

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
• Accepted Course Titles / Codes:
  • UETTDREL18

  • UETDRAI001 

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

For the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.

• Accepted Course Titles / Codes:

• UETDRAI002 - Inspect poles, hardware and electrical apparatus.
• No expiry

• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:

NOTE: Course code has changed to UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
  Pegasus Staff click here to read additional crucial business rule information prior to file verification

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  
• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
  
  • • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with:
  
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
  Pegasus Staff click here to read additional crucial business rule information prior to file verification

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF002
• UETTDRRF03 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF004
• UETTDRRF06 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  
• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with:
  
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC006

• UETTDRVC21 (Completion date must be prior to 20/09/2022)

• 12-month expiry

• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.Assess vegetation in an electricity supply industry environment

For the Statement of Attainment or Transcript:

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC002
• UETTDRVC24
• UETTDRVC24A
• UETTDRVC04B
• UETTDRVC04A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC004
  • UETTDRVC25 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

  NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC005
  • UETTDRVC26
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

  NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC009
  • UETTDRVC27
  • UETTDRVC27A
  • UETTDRVC07B
  • UETTDRVC07A
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC011
• UETTDRVC32
• UETTDRVC32A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC010
  • UETTDRVC34 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

  NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE
  : Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

  Issue date - If only an issue date is listed, please enter this as the issue date

  Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC007
• UETTDRVC33
• UETTDRVC33A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted course code/s: 
  • UEE30820 - Certificate III in Electrotechnology Electrician
  • UEE30811 - Certificate III in Electrotechnology Electrician
  • UEE30807 - Certificate III in Electrotechnology Electrician
  • UTE31199 - Certificate III in Electrotechnology Systems Electrician
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

The date of completion on the evidence should be recorded as the Issue Date in Pegasus