Competency Name | Competency Requirements | Upload Requirements |
|
Horticulture.Statement of Attainment.AHCARB207 - Perform Ground Based Rigging | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Horticulture.Statement of Attainment.AHCARB307 - Use advanced climbing techniques | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Horticulture.Statement of Attainment.AHCPCM201 - Recognise plants | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Horticulture.Statement of Attainment.Advanced Felling | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Horticulture.Statement of Attainment.Fell small trees | - Applicants Applicant’s name to should be shown on documentApplicants name on document must match cardholders registered name displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted- Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date not requiredis accepted.
- If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
- Documentation which has been found to be subject to alterations will not be accepted.
- RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
- Recognised Training Institution’s name to be displayed on document.
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Completion date or issue date must be displayed
- Accepted Course Titles / Codes:
- AHCPCM205
- AHCPCM203
- AHCARB202A
- RTC2005A
- No expiry
- Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
For overseas / international engineering qualifications to be accepted they need to either be recognised under the: Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
| The date of completion on the evidence should be recorded as the Issue Date in Pegasus Expiry date = none
|
|
Horticulture.Statement of Attainment.Standard climbing techniques | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Qualification.Statement of Attainment.Fell trees manually (intermediate) | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
| Qualification.Statement of Attainment.Trim trees with a polesaw | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
| Qualification.Certificate.Transmission line stringing winch operations | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
| Qualification.Certificate.RFS Bushfire Awareness | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date |
|
