Versions Compared

Old Version 122

changes.mady.by.user Grace Chisholm (Unlicensed)

Saved on

compared with

New Version 123

changes.mady.by.user Theodore Johnson (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Amended Confluence bug of duplicating content.




Expand
titleCertificates


CompetencyCompetency RequirementsUpload RequirementsExamples
Network Operator.Certificate.Vegetation Worker In-field Audit

  • Ausgrid issued certificate: ‘CERTIFICATE OF INFIELD AUDIT COMPLIANCE’
  • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • Business Name on Certificate to match the organisation registered.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • The attached document can be accepted in the interim.
  • Issue Date = as per certification
  • Expiry Date = 12 months after issue date
  • Interim Document =  2 week validity period. i.e. expires 2 weeks after submitted

View file
nameVeg In-Field Audit Placeholder - V1.pdf
height250
Electrical.Certificate of Attendance.Proof of attending the initial Electrical Safety Rules Course
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rules:

  • Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near electrical network infrastructure OR;
  • Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work OR;
  • Network Operator.Certificate.I0102 - Ausgrid - Environmental Awareness


  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
  • NO EXPIRY DATE

Electrical.Certificate III.UEE30811 - Certificate III in Electrotechnology Electrician
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course codes:
    • UEE30811
    • UTE31199
  • Document / Certificate / Number
  • No expiry
  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Anchor
UET30512
UET30512
Electrical.Certificate III.UET30512 - Certificate III in ESI - Power Systems - Transmission Overhead

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Anchor
UET30612
UET30612
Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course codes:
    • UET30612
    • UET30206
    • UET30209
    • UETT30101
    • UTT30101
    • UTT30301
    • Electricity Supply Industry Distribution (Powerline)
  • Document / Certificate / Number
  • No expiry
  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Certificate II in ESI - Powerline Vegetation Control

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry
  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Anchor
UET30812
UET30812
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Accepted course code/s:

    • UTT30301 - Certificate III in ESI - Cable Jointing (Powerline)

    • UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

Anchor
electricalworksupervisor
electricalworksupervisor
Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Document / Certificate / Number
  • No expiry

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date







Expand
titleLicences


CompetencyCompetency RequirementsUpload RequirementsExamples
Anchor
eleclicencensw
eleclicencensw
Electrical.Licence.NSW

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted
  • Supervisor licence can be accepted for the Electrical Contractor licence

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ or similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted
When Licence is uploaded:
  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

  • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion



Network Operator.Certificate.Vegetation Worker In-field Audit
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Required evidence to be uploaded is a form of acceptable evidence that is acceptable for any of the following competencies respective business rules:

  • Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near electrical network infrastructure OR;
  • Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work OR;
  • Network Operator.Certificate.I0102 - Ausgrid - Environmental Awareness
Electrical.Certificate III.UET30512 - Certificate III in ESI - Power Systems - Transmission OverheadElectrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution
Electrical.Certificate III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable JointingQualification.Certificate.Qualified Supervisor Certificate - Electrical WorkElectrical.Licence.NSW

Electrical.Statement of Attainment - Perform Pole Top Rescue 

For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF03’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescueFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment. - Perform rescue from a live LV panel

    For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETDRRF004 or UETTDRRF06’ as having been achieved with:
        • Any Registered Training Organisation (RTO) with this unit of competency on scope. RTO registration must have been current at the time of training completion
        • Date of Training
        • Trainer / Assessor Name
        • Signature
        • RTO stamp (RTO name and number must be visible)
    Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescueFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment UETTDRRF08B - CCD Release & Rescue from an EWP

    For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature

    Electrical.Statement of Attainment- Apply access procedures to work on or near electrical network infrastructure

    For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF09 or UETTDRRF09B ’ or 'Apply Access Procedures' or 'Network Access Procedures' as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    For Pegasus LMS Issued Certificate:
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
  • Certificate will show both Pegasus and Ausgrid Logos
    • Date of completion will be shown

    NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:

    Image Removed

    Electrical.Statement of Attainment.UETTDRVC21 Use climbing techniques to cut vegetation near live electrical apparatusFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC23 - Plan for the removal of vegetation up to veg exclusion zone near live electrical apparFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC24  Assess vegetation and recommend control measures in an ESI environment  For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC25 Use EWP to cut above ground vegetation near live electrical apparatusFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC26 Cut vegetation at ground near live electrical apparatusFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC27 - Monitor safety compliance for vegetation control work in an ESI environmentFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC31 Operate specialised plant & equipment at ground level near live electrical apparatus For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical apparaFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRVC34   Undertake release & rescue from a tree near live electrical apparatusFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRVC34’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus and For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Environmental.Statement of Attainment.AHCSAW201 - Conduct erosion and sediment control activitiesFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Expand
    titleStatement of Attainment



    CompetencyCompetency RequirementsUpload RequirementsExamples
    Electrical.Statement of Attainment.Booking confirmation Electrical Statement of Attainment - First Aid in an ESI Environment

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Anchor
    UETTDREL10
    UETTDREL10
    Electrical.Statement of Attainment- First Aid in an ESI Environment

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    • Units of competency code and name, date completed
      Note: Unit Code UETDRRF007 Supersedes and is equivalent to UETTDRRF10
    • Date certificate issued
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Applicant Name
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF10’ as having been achieved with:
        • Any Registered Training Organisation (RTO) with this unit of competency on scope. RTO registration must have been current at the time of training completion
        • Date of Training
        • Trainer / Assessor Name
        • Signature
        • RTO stamp (RTO name and number must be visible)
    • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Statement of Attainment:

    Skills Passport:

    SOA TAFE NSW

    Electrical.Statement of Attainment.Booking confirmation  – Testing of Connections to LV Electricity Networks

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Electrical.Statement of Attainment – Testing of Connections to LV Electricity NetworksFor the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Applicant Name
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF11 or UETTDRRF11A’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    SOA TAFE NSW

    Anchor
    UETTDREL13
    UETTDREL13
    Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDREL14
    UETTDREL14
    Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker 
    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.

    Accepted Form/s of Evidence:

    1. Statement of Attainment OR Transcript showing completion of UETTDREL14 or UETDREL006 that is issued by an RTO
    2. Statement of Attainment OR Transcript showing UETTDREL16 - This is considered equivalent/higher qualification

    RPL'ed units on transcript are acceptable

    Statement of Attainment must comply with ASQA Requirements per:

    https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

     RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    2. Australian Electricity Supply Industry (ESI) issued skills passport

    Expand
    titleCertificates
    CompetencyCompetency RequirementsUpload RequirementsExamples
    • Ausgrid issued certificate: ‘CERTIFICATE OF INFIELD AUDIT COMPLIANCE’
    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • Business Name on Certificate to match the organisation registered.
    • Documentation which has been found to be subject to alterations will not be accepted.
    • The attached document can be accepted in the interim.
    • Issue Date = as per certification
    • Expiry Date = 12 months after issue date
    • Interim Document =  2 week validity period. i.e. expires 2 weeks after submitted

    Image Removed

    View file
    nameVeg In-Field Audit Placeholder - V1.pdf
    height250
    		Electrical.Certificate of Attendance.Proof of attending the initial Electrical Safety Rules Course
    • Record the Issue date within Onsite:
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • NO EXPIRY DATE

    Image Removed

    		Electrical.Certificate III.UEE30811 - Certificate III in Electrotechnology Electrician
    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted course codes:
      • UEE30811
      • UTE31199
    • Document / Certificate / Number
    • No expiry
    • Record the Issue date within Onsite:
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UET30512UET30512
    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Document / Certificate / Number
    • No expiry

    For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    • Record the Issue date within Onsite:
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UET30612UET30612
    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted course codes:
      • UET30612
      • UET30206
      • UET30209
      • UETT30101
      • UTT30101
      • UTT30301
      • Electricity Supply Industry Distribution (Powerline)
    • Document / Certificate / Number
    • No expiry
    • Record the Issue date within Onsite:
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date

    Certificate II in ESI - Powerline Vegetation Control

    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Document / Certificate / Number
    • No expiry
    • Record the Issue date within Onsite:
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UET30812UET30812
    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Accepted course code/s:

      • UTT30301 - Certificate III in ESI - Cable Jointing (Powerline)

      • UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
    • Completion date or issue date must be displayed
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Document / Certificate / Number
    • No expiry

    For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    electricalworksupervisorelectricalworksupervisor
    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
    • Document / Certificate / Number
    • No expiry

    For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Expand
    titleLicences
    CompetencyCompetency RequirementsUpload RequirementsExamples
    Anchor
    eleclicencensweleclicencensw

    When Licence is uploaded:

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • ‘Electrician’ or similar to be listed
    • Screenshots from websites are not accepted - Must be copy of the Licence
    • Must be issued by a relevant Australian state government authority  with corresponding logo shown on licence EG NSW Department of Fair Trading
    • Black and white or coloured copy of evidence can be accepted
    • Supervisor licence can be accepted for the Electrical Contractor licence

    When Invoice (For new contractor Licence) has been uploaded:

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • ‘Electrician’ or similar to be listed
    • Date of receipt to be displayed on the invoice
    • Contractor number to be displayed on document
    • Must be issued by relevant state government authority
    • Black and white or coloured copy of evidence can be accepted
    		When Licence is uploaded:
    • Expiry Date = The date of expiration on the evidence

    When Invoice (For new contractor Licence) has been uploaded:

    • The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
    Expand
    titleStatement of Attainment
    Electrical.Statement of Attainment- First Aid in an ESI EnvironmentFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  • Units of competency code and name, date completed
    Note: Unit Code UETDRRF007 Supersedes and is equivalent to UETTDRRF10
  • Date certificate issued
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Applicant Name
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF10’ as having been achieved with:
        • Any Registered Training Organisation (RTO) with this unit of competency on scope. RTO registration must have been current at the time of training completion
        • Date of Training
        • Trainer / Assessor Name
        • Signature
        • RTO stamp (RTO name and number must be visible)
    • Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.
    Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.
  • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    • NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Applicant Name
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF11 or UETTDRRF11A’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response proceduresFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker 
    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.

    Accepted Form/s of Evidence:

    1. Statement of Attainment OR Transcript showing completion of UETTDREL14 that is issued by an RTO
    2. Statement of Attainment OR Transcript showing UETTDREL16 - This is considered equivalent/higher qualification

    RPL'ed units on transcript are acceptable

    Statement of Attainment must comply with ASQA Requirements per:

    https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

     RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    2. Australian Electricity Supply Industry (ESI) issued skills passport

    • Uploaded document must include page of passport that shows ‘UETTDREL14A' OR  'UETTDREL14A OR 'UETTDREL16 or UETDREL006 ' Working safely near live electrical apparatus as a non-electrical worker’ as having been achieved with:
      • Ausgrid or Energy Australia stamp being shown on this page
      • being shown on this page
      • Date of Training
      • Trainer / Assessor Name & Signature
      • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    Record the Issue date within Onsite:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus
    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.

    Accepted Form/s of Evidence:

    1. Statement of Attainment OR Transcript showing UETTDREL16

    RPL'ed units on transcript are acceptable

    Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.

    Statement of Attainment must comply with ASQA Requirements per:

    https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

    NOTE:  RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    2. Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must include page of passport that shows ‘UETTDREL16 - Working safely near live electrical apparatus’ as having been achieved with:
      • Ausgrid or Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name & Signature

    3. RTO issued Card or Certificate showing completion of course in Working Safely Near overhead and underground assets

    Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

    Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatusFor the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry For the Statement of Attainment or Transcript:
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
  •  RTO Name, Code and Logo
  •  Name of Applicant
  • Units of competency code and name, date completed
  • Date certificate issued
  • Authorised person name or title (does not necessarily need a signature)
  • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
  • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
  • There is no expiry date on a Statement of Attainment or Transcript.
  • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

    For the Statement of Attainment or Transcript:

    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Name of Applicant
    • Accepted units of competency:
      • UETTDRRF01
      • UETSS00019
      • UETSS00037
    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)
    CompetencyCompetency RequirementsUpload RequirementsExamples
    Electrical.Statement of Attainment.Booking confirmation Electrical Statement of Attainment - First Aid in an ESI Environment

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    Anchor
    UETTDREL10UETTDREL10

    Statement of Attainment:

    Image Removed

    Skills Passport:

    Image Removed

    SOA TAFE NSW

    Image Removed

    		Electrical.Statement of Attainment.Booking confirmation  – Testing of Connections to LV Electricity Networks

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    		Electrical.Statement of Attainment – Testing of Connections to LV Electricity NetworksRecord the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    SOA TAFE NSW

    Image Removed

    Anchor
    UETTDREL13 UETTDREL13 Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    UETTDREL14UETTDREL14

    Image Removed

    Image Removed

    Image Removed

    Anchor
    UETTDREL16UETTDREL16Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date: Not Required

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Image Removed
    Anchor
    UETTDREL17UETTDREL17Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDREL18UETTDREL18Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDREL19UETTDREL19Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDRRF01UETTDRRF01
    Expand
    titleAdditional BR information for ASP pending data only; Not Ausgrid Partners

    NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF01 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

    NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF01 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF01 training.

    Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF01 must be delivered through Ausgrid’s Training Group only

    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    • Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

    Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

    Uploaded document must also include page of passport that shows UETTDRRF01 or ESI Safety Rules or ESR as having been achieved with:

      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name
      • Signature

    NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:

    Image Removed

    For Pegasus LMS Issued Certificate:

    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
    • Certificate will show both Pegasus and Ausgrid Logos
    • Date of completion will be shown
    		Record the Issue date within Onsite:

    Image Removed

    SOA TAFE NSW

    Image Removed

    Image Removed

    		lectrical.Statement of Attainment - Perform Pole Top Rescue or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    Anchor
    UETTDRRF02UETTDRRF02Record the Issue date within Onsite:
    Image Removed

    SOA TAFE NSW

    Image Removed

    		Electrical.Statement of Attainment - LV Release & Rescue from an EWP or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Electrical.Statement of Attainment- LV Release & Rescue from an EWP

    		Record the Issue date within Onsite:

    Image Removed

    Image Removed

    SOA TAFE NSW

    Image Removed

    		Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue Or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    Anchor
    UETTDRRF04UETTDRRF04Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    		Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights  Or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    Anchor
    UETTDRRF05UETTDRRF05Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    		Electrical.Statement of Attainment.Booking confirmation -  - Perform rescue from a live LV panel

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    Anchor
    UETTDRRF06UETTDRRF06Record the Issue date within Onsite:

    Image Removed

    Image Removed

    SOA TAFE NSW

    Image Removed

    		Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    Anchor
    UETTDRRF07UETTDRRF07Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    		Electrical.Statement of Attainment  - CCD Release & Rescue from an EWP or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Image Removed

    Image Removed

    SOA TAFE NSW

    Image Removed

    Anchor
    UETTDRRF09UETTDRRF09Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Image Removed

    SOA TAFE NSW

    Image Removed

    Anchor
    UETTDRVC21UETTDRVC21Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
    Image Removed
    Anchor
    UETTDRVC23UETTDRVC23Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    UETTDRVC24UETTDRVC24Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    UETTDRVC25UETTDRVC25Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
    Image Removed
    Anchor
    UETTDRVC26UETTDRVC26Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
    Image Removed
    Anchor
    UETTDRVC27UETTDRVC27Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    UETTDRVC31UETTDRVC31Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    UETTDRVC32UETTDRVC32Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    UETTDRVC34UETTDRVC34
    Image Removed
    Anchor
    UETTDRVC33UETTDRVC33Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Image Removed
    Anchor
    AHCSAW201AHCSAW201Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Image Removed

    • Uploaded document must include page of passport that shows ‘UETTDREL14A' OR  'UETTDREL14A OR 'UETTDREL16 ' Working safely near live electrical apparatus as a non-electrical worker’ as having been achieved with:
      • Ausgrid or Energy Australia stamp being shown on this page
      • being shown on this page
      • Date of Training
      • Trainer / Assessor Name & Signature
      • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Anchor
    UETTDREL16
    UETTDREL16
    Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus
    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • Documentation which has been found to be subject to alterations will not be accepted.

    Accepted Form/s of Evidence:

    1. Statement of Attainment OR Transcript showing UETTDREL16

    RPL'ed units on transcript are acceptable

    Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must have been current at the time of training completion / awarding the document.

    Statement of Attainment must comply with ASQA Requirements per:

    https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

    NOTE:  RTO Training Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    2. Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must include page of passport that shows ‘UETTDREL16 - Working safely near live electrical apparatus’ as having been achieved with:
      • Ausgrid or Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name & Signature

    3. RTO issued Card or Certificate showing completion of course in Working Safely Near overhead and underground assets


    Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date: Not Required

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    Anchor
    UETTDREL17
    UETTDREL17
    Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Anchor
    UETTDREL18
    UETTDREL18
    Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Anchor
    UETTDREL19
    UETTDREL19
    Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry 
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Anchor
    UETTDRRF01
    UETTDRRF01
    Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

    For the Statement of Attainment or Transcript:

    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Name of Applicant
    • Accepted units of competency:
      • UETTDRRF01
      • UETSS00019
      • UETSS00037


    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)
    Expand
    titleAdditional BR information for ASP pending data only; Not Ausgrid Partners

    NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF01 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

    NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF01 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF01 training.

    Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF01 must be delivered through Ausgrid’s Training Group only


    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    • Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:

    Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant

    Uploaded document must also include page of passport that shows UETTDRRF01 or ESI Safety Rules or ESR as having been achieved with:

      • Ausgrid / Energy Australia stamp being shown on this page
      • Date of Training
      • Trainer / Assessor Name
      • Signature

    NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:


    For Pegasus LMS Issued Certificate:

    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
    • Certificate will show both Pegasus and Ausgrid Logos
    • Date of completion will be shown
    		Record the Issue date within Onsite:

    SOA TAFE NSW

    lectrical.Statement of Attainment - Perform Pole Top Rescue or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Anchor
    UETTDRRF02
    UETTDRRF02

    Electrical.Statement of Attainment - Perform Pole Top Rescue 

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    		Record the Issue date within Onsite:

    SOA TAFE NSW

    Electrical.Statement of Attainment - LV Release & Rescue from an EWP or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Electrical.Statement of Attainment- LV Release & Rescue from an EWP

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF03’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature


    		Record the Issue date within Onsite:

    SOA TAFE NSW

    Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue Or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Anchor
    UETTDRRF04
    UETTDRRF04
    Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights  Or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Anchor
    UETTDRRF05
    UETTDRRF05
    Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Electrical.Statement of Attainment.Booking confirmation -  - Perform rescue from a live LV panel

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Anchor
    UETTDRRF06
    UETTDRRF06

    Electrical.Statement of Attainment. - Perform rescue from a live LV panel

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETDRRF004 or UETTDRRF06’ as having been achieved with:
        • Any Registered Training Organisation (RTO) with this unit of competency on scope. RTO registration must have been current at the time of training completion
        • Date of Training
        • Trainer / Assessor Name
        • Signature
        • RTO stamp (RTO name and number must be visible)
    		Record the Issue date within Onsite:

    SOA TAFE NSW

    Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Anchor
    UETTDRRF07
    UETTDRRF07
    Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Electrical.Statement of Attainment  - CCD Release & Rescue from an EWP or Booking confirmation

    When Booking Confirmation is Uploaded:

    • This competency now accepts a Booking confirmation for the course they are completing 
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
    • Applicants name to be shown on document
    • RTO Name, Code and Logo
    • Units of competency code and name, date booked for
    • For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

    Electrical.Statement of Attainment UETTDRRF08B - CCD Release & Rescue from an EWP


    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    SOA TAFE NSW

    Anchor
    UETTDRRF09
    UETTDRRF09

    Electrical.Statement of Attainment- Apply access procedures to work on or near electrical network infrastructure

    For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    • From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
        • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRRF09 or UETTDRRF09B ’ or 'Apply Access Procedures' or 'Network Access Procedures' as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature


    For Pegasus LMS Issued Certificate:

    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
    • Certificate will show both Pegasus and Ausgrid Logos
    • Date of completion will be shown


    NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:





    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

    Pegasus Staff click here to read additional crucial business rule information prior to file verification

    SOA TAFE NSW

    Anchor
    UETTDRVC21
    UETTDRVC21
    Electrical.Statement of Attainment.UETTDRVC21 Use climbing techniques to cut vegetation near live electrical apparatus
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
    Anchor
    UETTDRVC23
    UETTDRVC23
    Electrical.Statement of Attainment.UETTDRVC23 - Plan for the removal of vegetation up to veg exclusion zone near live electrical appar
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDRVC24
    UETTDRVC24
    Electrical.Statement of Attainment.UETTDRVC24  Assess vegetation and recommend control measures in an ESI environment  
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDRVC25
    UETTDRVC25
    Electrical.Statement of Attainment.UETTDRVC25 Use EWP to cut above ground vegetation near live electrical apparatus
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
    Anchor
    UETTDRVC26
    UETTDRVC26
    Electrical.Statement of Attainment.UETTDRVC26 Cut vegetation at ground near live electrical apparatus
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
    Anchor
    UETTDRVC27
    UETTDRVC27
    Electrical.Statement of Attainment.UETTDRVC27 - Monitor safety compliance for vegetation control work in an ESI environment
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    Anchor
    UETTDRVC31
    UETTDRVC31
    Electrical.Statement of Attainment.UETTDRVC31 Operate specialised plant & equipment at ground level near live electrical apparatus 

    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date




    Anchor
    UETTDRVC32
    UETTDRVC32
    Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    UETTDRVC34
    UETTDRVC34
    Electrical.Statement of Attainment.UETTDRVC34   Undertake release & rescue from a tree near live electrical apparatus
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code


    For the Skills Passport:

    • Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
    • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
    • Uploaded document must also include page of passport that shows ‘UETTDRVC34’ as having been achieved with:
        • Ausgrid / Energy Australia stamp being shown on this page
        • Date of Training
        • Trainer / Assessor Name
        • Signature
    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).


    Anchor
    UETTDRVC33
    UETTDRVC33
    Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus and
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date
    Anchor
    AHCSAW201
    AHCSAW201
    Environmental.Statement of Attainment.AHCSAW201 - Conduct erosion and sediment control activities
    		For the Statement of Attainment or Transcript:
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    •  RTO Name, Code and Logo
    •  Name of Applicant
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    • There is no expiry date on a Statement of Attainment or Transcript.
    • **RTO registration must only have been current at the time of training completion / awarding the document
    • Document verifier to ensure the Issue of this document is an RTO.

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    		Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date