Page Comparison

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 600 mm outside diameter (single vee welded from both sides). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 270 mm outside diameter (single vee welded from one side only). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon alloy steel pipe (single vee weld from one side onlyboth sides). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds using hydrogen controlled electrodes in alloy steel plate and alloy steel pipe over 270 mm outside diameter (single vee weld from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of weld using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas tungsten-arc welding (GTAW) root run and manual metal-arc welding (MMAW) of welds using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas welding (GW) ( single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas tungsten - arc welding (GTAW) ( single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Flux cored arc welding (FCAW) of plate and pipe
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas metal - arc welding (GMAW) of plate and pipe
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Automatic Welding
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Welding Supervisor
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

•  Applicants name to be displayed on uploaded evidence and to match applicants registered name

• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite