Competency | Competency Requirements | Upload Requirements | Examples |
---|
Engineering.Advanced Diploma.Engineering Anchor |
---|
| DiplomaEngineering |
---|
| DiplomaEngineering |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Bachelor Degree.Chemical Engineering Anchor |
---|
| ChemicalEngineering |
---|
| ChemicalEngineering |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| If an international / overseas issued degree is uploaded as the evidence for this competency: Pegasus staff CLICK HERE for additional information prior to file verification - Date of completion to be recorded as the issue date in Onsite
- The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Bachelor Degree.Electrical Engineering Anchor |
---|
| ElectricalEngineering |
---|
| ElectricalEngineering |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| If an international / overseas issued degree is uploaded as the evidence for this competency: Pegasus staff CLICK HERE for additional information prior to file verification - Date of completion to be recorded as the issue date in Onsite
- The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Bachelor Degree.Engineering Anchor |
---|
| DegreeEngineering |
---|
| DegreeEngineering |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| If an international / overseas issued degree is uploaded as the evidence for this competency: Pegasus staff CLICK HERE for additional information prior to file verification - Date of completion to be recorded as the issue date in Onsite
- The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Bachelor Degree.Mechanical Engineering Anchor |
---|
| MechanicalEngineering |
---|
| MechanicalEngineering |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| If an international / overseas issued degree is uploaded as the evidence for this competency: Pegasus staff CLICK HERE for additional information prior to file verification - Date of completion to be recorded as the issue date in Onsite
- The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Certificate II.Engineering - Production Technology Anchor |
---|
| ProductionTech |
---|
| ProductionTech |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
Not Accepted - Craft Certificate - needs to be uploaded with SOC
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Certificate III.Engineering - Composites Trade Anchor |
---|
| CompositesTrade |
---|
| CompositesTrade |
---|
|
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
Not Accepted - Craft Certificate - needs to be uploaded with SOC
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Anchor |
---|
| productionsystems |
---|
| productionsystems |
---|
| Engineering.Certificate III.Engineering - Production Systems
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
Not Accepted - Craft Certificate - needs to be uploaded with SOC
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Certificate III.Engineering - Technical | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
Not Accepted - Craft Certificate - needs to be uploaded with SOC
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Certificate IV.Engineering | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
Not Accepted - Craft Certificate - needs to be uploaded with SOC
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Anchor |
---|
| advancedtrade |
---|
| advancedtrade |
---|
| Engineering.Diploma.Engineering - Advanced Trade
| - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|
Engineering.Diploma.Engineering - Technical | - Applicants name to be displayed on uploaded evidence and to match applicants registered name
- Recognised Training Institution name to be displayed on document (or to be issued by State Government body)
- Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
- Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
- Name and / or signature of issuer to be shown
- Document / Certificate / Number to be shown
- Completion date or issue date must be displayed
- No expiry
| - The date of completion on the evidence should be recorded as the Issue Date in Onsite
|
Not Accepted: - Fitting and Turning Qualifications
|