Page Comparison

Expand
title AS Course Certificates
Anchor AScoursecerts AScoursecerts Competency Competency Requirements Upload Requirements Examples Welder Certificate AS 1796-2001 - No 1 Anchor wedlercertasno1 wedlercertasno1 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 600 mm outside diameter (single vee welded from both sides).  If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Anchor weldercertasno1e weldercertasno1e Welder Certificate AS 1796-2001 - No 1E Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 270 mm outside diameter (single vee welded from one side only).  If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 2 Anchor weldercertasno2 weldercertasno2 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only).  If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 3 Anchor weldercertasno3 weldercertasno3 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only).  If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 3E Anchor weldercertasno3e weldercertasno3e Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Manual metal-arc welding (MMAW) of welds using hydrogen controlled electrodes in alloy steel plate and alloy steel pipe over 270 mm outside diameter (single vee weld from one side only) If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 4 Anchor weldercertasno4 weldercertasno4 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Manual metal-arc welding (MMAW) of weld using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only) If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 5 Anchor weldercertasno5 weldercertasno5 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Gas tungsten-arc welding (GTAW) root run and manual metal-arc welding (MMAW) of welds using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only) If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 6 Anchor weldercertasno6 weldercertasno6 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Gas welding (GW) (single vee welded from one side only) If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 7 Anchor weldercertasno7 weldercertasno7 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Gas tungsten-arc welding (GTAW) (single vee welded from one side only) If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 8F Anchor weldercertasno8f weldercertasno8f Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Flux cored arc welding (FCAW) of plate and pipe If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder.Certificate. AS 1796-2001 - No 8G Anchor weldercertasno8g weldercertasno8g Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Gas metal-arc welding (GMAW) of plate and pipe If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder.Certificate. AS 1796-2001 - No 9 Anchor weldercertasno9 weldercertasno9 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Automatic Welding If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date Welder Certificate AS 1796-2001 - No 10 Anchor weldercertasno10 weldercertasno10 Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite A certificate or card can be accepted Must show completion of Welding Supervisor If card is uploaded, both sides of card should be displayed in uploaded file Evidence must be issued by a registered training organisation (RTO) There must be an indication of the number that the applicant was certified in Black and white or colour copy can be accepted Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Expand
title Trade Certificates
Anchor weldingtradecerts weldingtradecerts Competency Competency Requirements Upload Requirements Examples Fabrication Metal & Welding.Certificate III.Boilermaking Anchor CertIIIBoilermaking CertIIIBoilermaking Applicants name to be displayed on uploaded evidence and to match applicants registered name Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer to be shown Document / Certificate / Number to be shown Completion date or issue date must be displayed No expiry Accepted Types Cert III Certificate of Proficiency Certificate of Completion of Apprenticeship Not Accepted Craft Certificate - needs to be uploaded with SOC The date of completion on the evidence should be recorded as the Issue Date in Onsite   Mechanical.Certificate.Certificate of Proficiency Boilermaker  Anchor CertProfBoillermaker CertProfBoillermaker  Applicants name to be displayed on uploaded evidence and to match applicants registered name Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer to be shown Document / Certificate / Number to be shown Completion date or issue date must be displayed No expiry Accepted Types Cert III Certificate of Proficiency Certificate of Completion of Apprenticeship Not Accepted Craft Certificate - needs to be uploaded with SOC The date of completion on the evidence should be recorded as the Issue Date in Onsite Fabrication Metal & Welding.Certificate III.Engineering - Fabrication Trade Anchor CertIIIFabricationtrade CertIIIFabricationtrade Applicants name to be displayed on uploaded evidence and to match applicants registered name Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer to be shown Document / Certificate / Number to be shown Completion date or issue date must be displayed No expiry Accepted Types Cert III Certificate of Proficiency Certificate of Completion of Apprenticeship Not Accepted Craft Certificate - needs to be uploaded with SOC The date of completion on the evidence should be recorded as the Issue Date in Onsite Fabrication Metal & Welding.Certificate III.Welder Anchor CertIIIWelder CertIIIWelder Applicants name to be displayed on uploaded evidence and to match applicants registered name Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer to be shown Document / Certificate / Number to be shown Completion date or issue date must be displayed No expiry Accepted Types Cert III Certificate of Proficiency Certificate of Completion of Apprenticeship Not Accepted Craft Certificate - needs to be uploaded with SOC The date of completion on the evidence should be recorded as the Issue Date in Onsite Fabrication Metal & Welding.Trade.Qualifications - Other Anchor TradeOther TradeOther Applicants name to be displayed on uploaded evidence and to match applicants registered name Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer to be shown Document / Certificate / Number to be shown Completion date or issue date must be displayed No expiry Accepted Types Cert III Certificate of Proficiency Certificate of Completion of Apprenticeship Not Accepted Craft Certificate - needs to be uploaded with SOC The date of completion on the evidence should be recorded as the Issue Date in Onsite Mechanical.Certificate.Certificate of Proficiency Welding Anchor CertProfWelding CertProfWelding Applicants name to be displayed on uploaded evidence and to match applicants registered name Recognised Training Institution name to be displayed on document Actual copy of certificate / degree is required. Letters are not accepted in lieu of this. Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite Name and / or signature of issuer to be shown Document / Certificate / Number to be shown Completion date or issue date must be displayed No expiry Accepted Types Cert III Certificate of Proficiency Certificate of Completion of Apprenticeship Not Accepted Craft Certificate - needs to be uploaded with SOC The date of completion on the evidence should be recorded as the Issue Date in Onsite

If you have been asked to provide a Statement of Competency please click here for the template and business rules

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 600 mm outside diameter (single vee welded from both sides). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder Certificate AS 1796-2001 - No 1E

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 270 mm outside diameter (single vee welded from one side only). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Removed

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only). 
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of welds using hydrogen controlled electrodes in alloy steel plate and alloy steel pipe over 270 mm outside diameter (single vee weld from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Manual metal-arc welding (MMAW) of weld using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Removed

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas tungsten-arc welding (GTAW) root run and manual metal-arc welding (MMAW) of welds using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Removed

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas welding (GW) (single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas tungsten-arc welding (GTAW) (single vee welded from one side only)
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Flux cored arc welding (FCAW) of plate and pipe
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Gas metal-arc welding (GMAW) of plate and pipe
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Automatic Welding
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

• Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
• A certificate or card can be accepted
• Must show completion of Welding Supervisor
• If card is uploaded, both sides of card should be displayed in uploaded file
• Evidence must be issued by a registered training organisation (RTO)
• There must be an indication of the number that the applicant was certified in
• Black and white or colour copy can be accepted

• Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Fabrication Metal & Welding.Certificate III.Boilermaking

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Image RemovedImage Removed
 

Mechanical.Certificate.Certificate of Proficiency Boilermaker 

•  Applicants name to be displayed on uploaded evidence and to match applicants registered name

• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Fabrication Metal & Welding.Certificate III.Engineering - Fabrication Trade

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Fabrication Metal & Welding.Certificate III.Welder

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Fabrication Metal & Welding.Trade.Qualifications - Other

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

Mechanical.Certificate.Certificate of Proficiency Welding

• Applicants name to be displayed on uploaded evidence and to match applicants registered name
• Recognised Training Institution name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
• Name and / or signature of issuer to be shown
• Document / Certificate / Number to be shown
• Completion date or issue date must be displayed
• No expiry

Accepted Types

• Cert III
• Certificate of Proficiency
• Certificate of Completion of Apprenticeship

Not Accepted

• Craft Certificate - needs to be uploaded with SOC

• The date of completion on the evidence should be recorded as the Issue Date in Onsite

If you have been asked to provide a Statement of Competency please click here for the template and business rules