Versions Compared

Old Version 11

changes.mady.by.user Gracielle Molino

Saved on

compared with

New Version 12

changes.mady.by.user Anika McEvoy

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Image Removed

Expand
titleCarpentry
AnchorYaraCarpentryYaraCarpentry

Image Added


Expand
titleCarpentry

Anchor
YaraCarpentry
YaraCarpentry

Competency Competency Requirements Upload RequirementsExamples

Carpenter.Certificate III.

  • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Must be issued by an RTO with Nationally Recognised Training logo
  • Actual copy of document is required.
  • Course title and associated level to be listed on document
  • Accepted examples of course titles to be displayed:
    • Carpentry and Joinery
    • Carpentry
    • Carpentry and/or Formsetting
  • Accepted document types include
    • Completion of Trade
    • Completion of Apprenticeship
    • Certificate of Proficiency
    • Trade Certificate
    • Certificate of Completion
    • Certificate of Qualification
    • Certificate III
    • Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval

  • Document / Certificate / Number to be listed
  • Black and white or colour is acceptable
  • Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

To be deemed valid the request shall be:

Avetta verifier click here for additional business rule prior to verification of this competency

  • Issue Date to be recorded as shown on document



Examples
Expand
titleE&I Technicians

Anchor
YaraEandI
YaraEandI

Competency Competency Requirements Upload RequirementsExamples
Carpenter

Electrical Instrumentation.Certificate III.E&I Technicians

  • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
  • Must be issued by an RTO with Nationally Recognised Training logo
  • Actual copy of document is required.
  • Course title and associated level to be listed on
document
  • Completion of Trade
  • Completion of Apprenticeship
  • Certificate of Proficiency
  • Trade Certificate
  • Certificate of Completion
    • Certificate of Qualification
    • certificate
    • Accepted examples of course titles/codes to be displayed:
    • Carpentry and Joinery
    • Carpentry
    • Carpentry and/or Formsetting
      • Accepted document types include
        • Electrotechnology Electrician
        • Electrical Mechanic
        • Electrical & Instrumentation
      • Accepted document types include
        • Certificate III
    • Australian Recognised Trade Certificate

      • Note:

      Other

      other equivalent competency codes may be accepted with Yara approval.

      • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible

      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this

      competency
      • Issue Date to be recorded as shown on document
      Expand
      titleE&I Technicians
      Anchor
      YaraEandIYaraEandICompetency Competency Requirements Upload Requirements

      competency

      • Issue Date to be recorded as shown on document

      Electrical Instrumentation.Certificate

      III

      IV.E&I Technicians

      Name
      •  Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Must be issued by an RTO with Nationally Recognised Training logo
      • Actual copy of document is required.
      • Course title and associated level to be listed on certificate
      • Accepted examples of course titles/codes to be displayed:
        • UEE40407
      Electrotechnology ElectricianElectrical & Instrumentation
        • UEE40410
    • Electrical Mechanic
        • UEE40411
        • UEE40420
      • Accepted document types include
      Certificate III
      • :
        • Completion of Trade
        • Completion of Apprenticeship
        • Certificate of Proficiency
        • Trade Certificate
        • Certificate of Completion
        • Certificate of Qualification
        • Certificate IV
        • Australian Recognised Trade Certificate

      Note:

      other

      Other equivalent competency codes may be accepted with Yara approval.

      • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible

      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be
      recorded as shown on document

      Electrical Instrumentation.Certificate IV.E&I Technicians

       Name
      • recorded as shown on document



    • Name on document to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
    • Certificate will demonstrate Inspector Accreditation
      • Document musts demonstrate competency to NACEINSPL1 (AICIP, API, ASME, NACE, AWS, CSWIP or TWI)
      Expand
      titleInspection

      Anchor
      YaraInspection
      YaraInspection

      Competency Competency Requirements Upload RequirementsExamples

      External.Certificate.EXT067 Inspection Certification

      Inspector.Certificate.(AICIP, API, ASME, NACE, AWS, CSWIP or TWI) - Inspection Certification

      Inspector.Certificate.NACEINSPL1 - Inspection Certification

      • Name on document to match
      the
      Anchor
      YaraInspectionYaraInspection
      Competency Competency Requirements Upload RequirementsExamples

      External.Certificate.EXT067 Inspection Certification

      Inspector.Certificate.(AICIP, API, ASME, NACE, AWS, CSWIP or TWI) - Inspection Certification

      Inspector.Certificate.NACEINSPL1 - Inspection Certification

      • person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
    • Must be issued by an RTO with Nationally Recognised Training logo
    • Actual copy of document is required.
    • Course title and associated level to be listed on certificate
    • Accepted examples of course titles/codes to be displayed:
      • UEE40407
      • UEE40410
      • UEE40411
      • UEE40420
    • Accepted document types include:
      • Completion of Trade
      • Completion of Apprenticeship
      • Certificate of Proficiency
      • Trade Certificate
      • Certificate of Completion
      • Certificate of Qualification
      • Certificate IV
      • Australian Recognised Trade Certificate

      • Note: Other equivalent competency codes may be accepted with Yara approval.

      • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible

      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be recorded as shown on document
      Expand
      titleInspection
      • Certificate will demonstrate Inspector Accreditation
      • Document musts demonstrate competency to NACEINSPL1 (AICIP, API, ASME, NACE, AWS, CSWIP or TWI)
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible


      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be entered as date of training completion
      • Expiry date as displayed on certificate.  If no expiry date then 3 years from issue date.



    • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
    • Must be issued by an RTO with Nationally Recognised Training logo
    • Actual copy of document is required.
    • Course title and associated level to be listed on certificate
    • Accepted examples of course titles to be displayed:
      • Engineering - Mechanical Trade
      • Engineering - Mechanical Trade (Fitting/machining)
      • Engineering Tradesperson (Mechanical) (Fitting)
      • Diesel Fitting
      • Diesel Fitting ( Pathway )
      • Mechanical Fitter
      • Mechanical Trade (Maintenance) - Fitting and / or Turning Pathway
      • Fitter and Turner or Mechanical
      • Fitter and Machinist
      • MEM30219 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
      • Accepted document types include
      Expand
      titleMechanical

      Anchor
      YaraMechanical
      YaraMechanical

      Competency Competency Requirements Upload RequirementsExamples

      Mechanical.Certificate IV.Mechanical Technicians

      • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Must be issued by an RTO with Nationally Recognised Training logo
      • Actual copy of document is required.
      • Course title and associated level to be listed on certificate
      • Accepted examples of course titles to be displayed:
        • Engineering - Mechanical Trade
        • Engineering - Mechanical Trade (Fitting/machining)
        • Engineering Tradesperson (Mechanical) (Fitting)
        • Diesel Fitting
        • Diesel Fitting ( Pathway )
        • Mechanical Fitter
        • Mechanical Trade (Maintenance) - Fitting and / or Turning Pathway
        • Fitter and Turner or Mechanical
        • Fitter and Machinist
        • MEM30219 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
      • Accepted document types include
        • Completion of Trade
        • Completion of Apprenticeship
        • Certificate of Proficiency
        • Trade Certificate
        • Certificate of Completion
        • Certificate of Qualification
        • Certificate IV
        • Australian Recognised Trade Certificate

      Note: Other equivalent competency codes may be accepted with Yara approval.

      • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible

      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      to match
    • Shall be ‘approved’
    • Issue date: Use date of issue
    • Expire date: As listed on the form
    • Shall have approver role, name and signature.

      • Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be entered as date of training completion
      • Expiry date as displayed on certificate.  If no expiry date then 3 years from issue date.
      Expand
      titleMechanical
      Anchor
      YaraMechanicalYaraMechanical
      Competency Competency Requirements Upload RequirementsExamples

      Mechanical.Certificate IV.Mechanical Technicians

      • to match
      • Shall be ‘approved’
      • Issue date: Use date of issue
      • Expire date: As listed on the form
      • Shall have approver role, name and signature.

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be recorded as shown on document



      • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Must be issued by an RTO with Nationally Recognised Training logo
      • Actual copy of document is required.
      • Course title and associated level to be listed on certificate
      • Accepted examples of course titles to be displayed:
        • Industrial Painter
        • Blastercoater
      • Accepted document types include:
        • Completion of Trade
        • Completion of Apprenticeship
        • Certificate of Proficiency
        • Trade Certificate
        • Certificate of Completion
        • Certificate of Qualification
        • Certificate III
        • Australian Recognised Trade Certificate

      Note: Other equivalent competency codes may be accepted with Yara approval.

    • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      Expand
      titlePainter / Sandblaster

      Anchor
      YaraPainter
      YaraPainter

      Competency Competency Requirements Upload RequirementsExamples

      Painter.Certificate III.Painter / Sandblaster

      • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Must be issued by an RTO with Nationally Recognised Training logo
      • Actual copy of document is required.
      • Course title and associated level to be listed on certificate
      • Accepted examples of course titles to be displayed:
        • Industrial Painter
        • Blastercoater
      • Accepted document types include:
        • Completion of Trade
        • Completion of Apprenticeship
        • Certificate of Proficiency
        • Trade Certificate
        • Certificate of Completion
        • Certificate of Qualification
        • Certificate
      IV
        • III
        • Australian Recognised Trade Certificate

      Note: Other equivalent competency codes may be accepted with Yara approval.

      • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible

      Exemption Process:

      An exemption may be granted

      for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be recorded as shown on document
      Expand
      titlePainter / Sandblaster
      Anchor
      YaraPainterYaraPainter
      Competency Competency Requirements Upload RequirementsExamples

      Painter.Certificate III.Painter / Sandblaster

      for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be recorded as shown on document



      Expand
      titlePlumber

      Anchor
      YaraPlumber
      YaraPlumber

      Competency Competency Requirements Upload RequirementsExamples

      External.EXT097.Plumbing Tradesperson / Contractors Licence

      • Name on Licence should match the person registered
      • Colour copy required
      • Only the front of the licence is required providing it meets all other verification points
      • Must be issued by Western Australian Government appointed organisation and the organisation logo must be present
      • Must display ‘Plumbing Contractors Licence or Plumbing Tradesperson Licence”
      • Licence number and expiry date must be displayed
      • Scanned document to be clearly legible


      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be
      recorded
      • entered as displayed on licence or enter as yesterdays date
      • Expiry to be entered as shown on
      document
      • licence



      Expand
      titleWeighbridge Operators

      Anchor
      YaraWeighbridge
      YaraWeighbridge

      Competency Competency Requirements Upload RequirementsExamples
      External.Certificate.EXT002 Weighbridge Operators
      • Name on certificate to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Certificate must indicate completion of Weighbridge Operator
      • Must be Issued by an RTO with Nationally Recognised Training logo
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible


      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be entered as date of training completion
      • No expiry



      Expand
      titleWelding

      Anchor
      YaraWelding
      YaraWelding

      Competency Competency Requirements Upload RequirementsExamples

      External.Certificate.EXT093 International Welding Inspector Certification

      Welder.Certificate.(CSWI), UK

      Welder.Certificate.(CSWIP 3-2) SA

      Welder.Certificate.(IWI S) Aust

      Welder.Certificate.(SAIW) NZ (CBIP)

      • Name on document to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Document musts demonstrate competency to: 

      a.    (IWI S) Aust. (CSWI), 
      b.    UK (CSWIP 3.2)
      c.    SA (SAIW) 
      d.    NZ (CBIP)  

      • Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible


      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be entered as date of training completion
      • Expiry date as displayed on certificate. If no expiry date then no date to be entered

      Welder/Boilermaker.Certificate III.

      • Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
      • Must be issued by an RTO with Nationally Recognised Training logo
      • Actual copy of document is required.
      • Course title and associated level to be listed on document
      • Accepted examples of course titles/codes to be displayed:
        • Boilermaking or Certificate III in Engineering - Fabrication Trade
        • AS1796 Certification
        • AS2214 Certification
        • AS1554 Certification
        • WTIA Certified Welder

      Note: Other equivalent competency codes may be accepted with Yara approval.

      Note: Further qualification may be required to be demonstrated by producing code-compliant & WPS compliant welds

      • Accepted document types include
        • Completion of Trade
        • Completion of Apprenticeship
        • Certificate of Proficiency
        • Trade Certificate
        • Certificate of Completion
        • Certificate of Qualification
        • Certificate III
        • Australian Recognised Trade Certificate
      • Document / Certificate / Number to be listed
      • Black and white or colour is acceptable
      • Scanned document to be clearly legible

      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:

      Avetta verifier click here for additional business rule prior to verification of this competency

      • Issue Date to be recorded as shown on document



      Competency Competency Requirements Upload RequirementsExamples
      All other Trade Qualification Certificates

      Click here to be re-directed to the Avetta National Business Rules for Trade Qualifications

      Exemption Process:

      An exemption may be granted for a training competency requirement listed in the Training Matrices for an  employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

      To be deemed valid the request shall be:


      Avetta verifier click here for additional business rule prior to verification of this competency