| Competency | Competency Requirements | Upload Requirements | Examples |
|---|
| Mechanical.Qualified.Certificate of Proficiency - Fitter and Turner | - Name on qualification to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Accepted Course Titles include:
- Black and white or colour acceptable
- Must be clearly scanned and legible
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Mechanical.Qualified.Certificate of Proficiency - Fitter Machinist | - Name on qualification to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Accepted Course Titles include:
- Black and white or colour acceptable
- Must be clearly scanned and legible
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Mechanical.Qualified.Certificate of Proficiency - Engineering Fabrication | - Name on qualification to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Accepted Course Titles include:
- Engineering Fabrication
- Engineering - Fabrication Trade
- Black and white or colour acceptable
- Must be clearly scanned and legible
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information | |
Engineering.Statement of Attainment.Partial Completion of Cert II in Engineering. | - Name on qualification to match the person registered
- Statement of Attainment to be issued by a Registered Training Organisation(RTO)
- Accepted Documentation Type:
Pirtek Statement of Attainment can be accepted Engineering.Statement of Attainment - Black and White or colour acceptable
- Must be clearly scanned and legible-PDF copy
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Mechanical.Qualified.Certificate of Proficiency - Boilermaker | - Name on certificate to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Australian Recognised Trade Certificate in the relevant course to be listed
- Accepted Course Titles include:
- Boilermaker
- Structural Steel Tradesperson
- Black and white or colour is acceptable
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information | |
Mechanical.Qualified.Medium Vehicle Mechanic Acceptable Certificates; - Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial)
OR - COP - Automotive (Heavy Vehicle Mechanical)(Road Transport) - Medium Vehicle Mechanic
| - Name on qualification to match the person registered
- Completion date or issue date must be displayed
- Course listed on certificate must match competency name exactly and be a certificate of proficiency
Note - this business rule is for the Medium Vehicle Mechanic role only - Pegasus to view the submitted role prior to approval
From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Certificate II in Engineering (High Pressure Hose Assemblies) or equivalent | - Name on qualification to match the person registered
- Must state Engineering (High Pressure Hose Assemblies) or equivalent
- Black and white or colour acceptable
- Must be clearly scanned and legible
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
| NOTE: The following example document is only applicable when accepted for this competency within the following role only: Hydraulic Hose Technician (Fabricate Hose Only).  Image Modified
|
| Certificate III Engineering (Mechanical Trade) | - Name on qualification to match the person registered
- Must state Engineering (Mechanical) or equivalent
- Black and white or colour acceptable
- Must be clearly scanned and legible
From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. | - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Hydraulic Hose Technician (Fabricate Hose Only) | - Name on certificate to match the person reregistered
- Statement of Attainment to be issued by a Registered Training Organisation(RTO)
- Black and White or colour acceptable
- Must be clearly scanned and legible-PDF copy
- Accepted Documentation Type:
Pirtek Certificate of Completion Engineering Statement of Attainment |
- Issue date to be recorded
- No expiry date
|
|
Heavy Vehicle Mechanic (Mobile Plant) - Shared Zone Qualifications
Acceptable Certificates; - Certificate of Proficiency - Automotive Mobile Plant Technology
OR - Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial)
OR - Certificate of Proficiency - Automotive Mechanical Technology
OR - Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Road Transport)
| - Name on qualification to match the person registered
- Completion date or issue date must be displayed
- Course listed on certificate must match competency name exactly
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
*THIESS APPROVAL REQUIRED FOR “Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)” Certificate must be uploaded with the transcript. The transcript must list ALL 3 modules listed below and must be uploaded with approval email from mtarthursouthinductions@thiess.com.au It is the company’s responsibility to seek the approval prior to the uploading of the documents. If approval is not uploaded for the Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport) + transcripts, the file document will be rejected. - Service hydraulic systems
- Inspect service and repair tracked type drive and support systems
- Diagnose and repair mobile plant braking systems
Note - this business rule is for the Heavy Vehicle Mechanic (Mobile Plant) - Shared Zone role - Pegasus to view the submitted role prior to approval
From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information | |
Heavy Vehicle Mechanic (Mobile Plant) - Thiess Area Only
Acceptable Certificates; - Certificate of Proficiency - Plant Mechanic
OR - Certificate of Proficiency - Heavy Vehicle
OR Certificate of Proficiency - Diesel Fitter OR - Certificate of Proficiency - Automotive Mobile Plant Technology
OR - Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial)
OR - Certificate of Proficiency - Automotive Mechanical Technology
OR - Certificate of Proficiency in Agricultural Mechanical Technology (Plant)
OR - Certificate of Proficiency - Certificate IV in Engineering (Plant)
OR - Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)
| - Name on qualification to match the person registered
- Completion date or issue date must be displayed
- Course listed on certificate must match competency name exactly
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
*THIESS APPROVAL REQUIRED FOR “Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)” Certificate must be uploaded with the transcript. The transcript must list ALL 3 modules listed below and must be uploaded with approval email from mtarthursouthinductions@thiess.com.au It is the company’s responsibility to seek the approval prior to the uploading of the documents. If approval is not uploaded for the Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport) + transcripts, the file document will be rejected. - Service hydraulic systems
- Inspect service and repair tracked type drive and support systems
- Diagnose and repair mobile plant braking systems
Note - this business rule is for the Heavy Vehicle Mechanic (Mobile Plant) - Thiess Area Only role - Pegasus to view the submitted role prior to approval
From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. | - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information | |
| Mechanical Engineering Qualification | - Name on qualification to match the person registered
- Must state Mechanical Engineering or equivalent
- Black and white or colour acceptable
- Must be clearly scanned and legible
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Mechanical.Qualified.Certificate of Proficiency - Automotive (Light Vehicle - Mechanical) | - Name on qualification to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Accepted Course Titles include:
- Automotive (Light Vehicle - Mechanical)
- Black and white or colour acceptable
- Must be clearly scanned and legible
- From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Mechanical.Qualified.Certificate of Proficiency - Light Vehicle | - Name on qualification to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Accepted Course Titles include:
- Black and white or colour acceptable
- Must be clearly scanned and legible
- From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
| Mechanical.Qualified.Certificate of Proficiency - Motor Mechanic | - Name on qualification to match the person registered
- Accepted Documentation Types:
- 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
- Accepted Course Titles include:
- Black and white or colour acceptable
- Must be clearly scanned and legible
- From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.
| - Issue Date = Date of completion
- Expiry Date = No expiry date to be entered
Pegasus staff CLICK HERE for additional business rule information |
|
