Versions Compared

Old Version 15

changes.mady.by.user Anika McEvoy

Saved on

compared with

New Version 16

changes.mady.by.user Anika McEvoy

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Expand
titleSupervisory Interim Certification
CompetencyCompetency RequirementsUpload RequirementsExamples

Anchor
supervisorcertificateinterim
supervisorcertificateinterim
Supervisor.Certificate.Interim (6 month)

  • Name on interim certificate to match the applicants registered name in Onsite
  • Attendance sheet of supervisor course can be accepted as 'Interim Certificate'

  • All supervisors will complete their training supervisor course training however they will also then have 6 months to complete the following 4 training modules:

    1. BSBMGT401 Show leadership in the workplace
    2. BSBRSK401 Identify risk and apply risk management processes
    3. Project.Induction.Mates in Construction General Awareness
    4. Project.Induction.Cultural Awareness Training
  • To be issued by the relevant authority
  • Black and white or colour copies accepted
  • Issue date = Date of issue to be recorded as date of attendance
  • Expiry date = 6 months from issue date
 
Demolition.Statement of Attainment.BSBMGT401 Show leadership in the workplace

When a tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

 

When statement of Attainment is Uploaded:

  • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
  • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
  • completion date or issue date must be displayed
  • Unit of competency listed on certificate to match the nominated unit within Onsite
  • Name and / or signature of issuer
  • Document / Certificate / Statement of Attainment Number
  • Nationally Recognised Training logo
  • No expiry

When Transcript (Accepted in lieu of SOA) is uploaded:

  • RTO Name & Logo to be displayed on document
  • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
  • completion date or issue date must be displayed
  • Unit of competency listed on document to match the nominated unit within Onsite
  • If individual unit results are displayed the result needs to indicate completion / pass result.
    Grading categories can be referenced HERE
    • No expiry

    NOTE: This SOA unit is required to be complete for all supervisors within 6 months of attendance at the supervisor course - see Supervisor.Certificate.Interim (6 month) business rule for more information

    Demolition.Statement of Attainment.BSBRSK401 Identify risk and apply risk management processes

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

  • RTO Name & Logo to be displayed on document
  • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
  • completion date or issue date must be displayed
  • Unit of competency listed on document to match the nominated unit within Onsite
  • If individual unit results are displayed the result needs to indicate completion / pass result.
    Grading categories can be referenced HERE
    • No expiry

    NOTE: This SOA unit is required to be complete for all supervisors within 6 months of attendance at the supervisor course - see Supervisor.Certificate.Interim (6 month) business rule for more information

    Demolition.Statement of Attainment.CPCCBC4002A Manage occupational health and safety in the buiDemolition.Statement of Attainment.CPCCDE3016A Identify hazards on demolition sites and apply rDemolition.Statement of Attainment.CPCCDE3017A Select and use hand tools and equipment for demoDemolition.Statement of Attainment.CPCCDE3018A Select and use small plant and equipment for demDemolition.Statement of Attainment.CPCCDE3020A Select and use tools and equipment for hot workDemolition.Statement of Attainment.CPCCDE3022A Manage demolition recyclables and waste materialDemolition.Statement of Attainment.CPCCDE4001A Plan and prepare for activities on demolition siDemolition.Statement of Attainment.CPCCDE4002A Plan and supervise demolition works to minimiseDemolition.Statement of Attainment.CPCCDE4004A Finalise demolition activities & property HandovDemolition.Statement of Attainment.CPCCM2001A Read and interpret plans and specificationsDemolition.Statement of Attainment.CPCCOHS2001A Apply OHS Requirements, policies and procedures
    Expand
    titleLicences
    CompetencyCompetency RequirementsUpload RequirementsExamples
    Anchor
    demolitionlicence
    demolitionlicence
    Demolition.Licence.SafeWork NSW
    • Name on licence to match the applicants registered name in Onsite
    • Demolition to be listed
    • Only the front side of this licence is required to be uploaded.
    • To be issued by the relevant / matching state authority: Workcover/ Safework / Worksafe NSW
    • Black and white or colour copies accepted
    • Issue date = Date of issue IF displayed on the licence
    • Expiry date = Date of expiry shown on licence
    		 
    Expand
    titleStatement of Attainment
    CompetencyCompetency RequirementsUpload RequirementsExamples
    Anchor
    BSBMGT401BSBMGT401

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    RIW Document Examples | Statement of Attainment

    Anchor
    BSBRSK401BSBRSK401 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCBC4002ACPCCBC4002A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE3016ACPCCDE3016A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE3017ACPCCDE3017A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE3018A CPCCDE3018A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Demolition.Statement of Attainment.CPCCDE3019A Demolish small buildings and structures using ha

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE3020ACPCCDE3020A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE3022ACPCCDE3022A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE4001ACPCCDE4001A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE4002ACPCCDE4002A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Demolition.Statement of Attainment.CPCCDE4003A Supervise individual activities on demolition si

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCDE4004ACPCCDE4004A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCM2001ACPCCM2001A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment
    Anchor
    CPCCOHS2001ACPCCOHS2001A

    When a tafe issued participant results record is uploaded:

    • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
    • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form to have trainer name and signature at the bottom of the page

     

    When statement of Attainment is Uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
    • Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on certificate to match the nominated unit within Onsite
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document
    • Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
    • completion date or issue date must be displayed
    • Unit of competency listed on document to match the nominated unit within Onsite
    • If individual unit results are displayed the result needs to indicate completion / pass result.
      Grading categories can be referenced HERE
    • No expiry
    		 

    When a tafe issued participant results record is uploaded:

    'End Date' should be recorded as the date of training completion / Issue date in Onsite.

    NOTE: You can record the 'start date' instead if this is the only date shown between the two fields

     

     

     

     

    When statement of attainment is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

     

    When Transcript (Accepted in lieu of SOA) is uploaded:

    • Document verifier to ensure the Issue of this document is an RTO.
    • Record the Issue date within Onsite

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within

    		RIW Document Examples | Statement of Attainment