| Competency Name | Competency Requirements | Upload Requirements | Examples |
|---|
| Welder.Statement of Attainment.Polyethylene Butt & Electro Fusion Welding | - Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Accepted Documents:
- Statement of Attainment
- Certificate of Attendance
- Welders Card
- Competency unit/qualification code must match exactly
- Must be Issued by an RTO with Nationally Recognised Training logo
- Black and white or colour is acceptable
- Scanned document to be clearly legible
Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.
| - Issue Date to be entered as date of training completion
- Expiry date not required
| |
Welder.Certificate.PMBWELD301 Butt Weld Polyethylene Plastic Pipelines Welder.Certificate.PMBWELD302 Electro Fusion Weld Polyethylene Plastic Pipelines
| - Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Accepted Documents:
- Verification of Competence
- Welders Card
- Competency unit/qualification code must match exactly
- Must be Issued by an RTO with Nationally Recognised Training logo
- Black and white or colour is acceptable
- Scanned document to be clearly legible
Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.
| - Issue Date to be entered as date of training completion
- Expiry date not required
| |
Welder.Certificate II.Polymer Processing (or equivalent)
| - Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Accepted Documents:
- Certificate II showing the Polymer Processing or Polyweld qualification
- Welders Card
- Competency unit/qualification code must match exactly
- Must be Issued by an RTO with Nationally Recognised Training logo
- Black and white or colour is acceptable
- Scanned document to be clearly legible
Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.
| - Issue Date to be entered as date of training completion
- Expiry date not required
| |
| Welder.Certificate III.Polymer Processing (or equivalent) | - Name on certificate or card to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
- Accepted Documents:
- Certificate III showing the Polymer Processing or Polyweld qualification
- Welders Card
- Competency unit/qualification code must match exactly
- Must be Issued by an RTO with Nationally Recognised Training logo
- Black and white or colour is acceptable
- Scanned document to be clearly legible
Note: If a card is supplied there must be a copy of the front and back displaying the units of competency, person's name, issue date as above and must be issued by an RTO.
| - Issue Date to be entered as date of training completion
- Expiry date not required
| |
| Welder.Certificate.Certification Welding AS-NZS 1554-1 Certificate (or equivalent) | - The worker’s name shown on the document should match the worker’s registered name in Onsite. First name initial and surname is acceptable
- A weld test report must be submitted
- The document will need to mention either Certificate Welding AS/NZS 1554.1 or AS/NZS 2980 or ISO 9606
- Must have a C for competent
| Record date of test as the issue date | |
| Site.Course.RTIO Rail PLK Welder; 30568930 | First and last name must match applicant's name in Onsite.
Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"
Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"
The following evidence can be accepted:- SAP Extract
- Assessment Record
- Training Plan
- Record Book
Matching competency name, with or without code (if with checkbox, this should be completed) | Issue date = Date of Induction or Date of Attendance
Expiry date = 2 years from issue date |
|
| Anchor |
|---|
| OAEMobileFlashbutt |
|---|
| OAEMobileFlashbutt |
|---|
|
Site.Course.RTIO K355; 31333181 | First and last name must match applicant's name in Onsite.
Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"
Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"
The following evidence can be accepted:- SAP Extract
- Assessment Record
- Training Plan
- Record Book
Matching competency name, with or without code (if with checkbox, this should be completed) | Issue date = Date of Induction or Date of Attendance
Expiry date = 2 years from issue date |
|
| Site.Course.RTIO OAE Mobile Flashbutt Kube; 31333182 | First and last name must match applicant's name in Onsite.
Shortened versions of first names are accepted, such as:
"Chris" instead of "Christopher"
"Wil" instead of "William"
Shortened versions of last names are accepted, such as:
"Herrera" instead of "Herrera Trujillo"
"Mohd" instead of "Raza Hasan Mohd"
The following evidence can be accepted:- SAP Extract
- Assessment Record
- Training Plan
- Record Book
Matching competency name, with or without code (if with checkbox, this should be completed) | Issue date = Date of Induction or Date of Attendance
Expiry date = 2 years from issue date |
|
.JPG?version=1&modificationDate=1722822903000&cacheVersion=1&api=v2&height=63)