Versions Compared

Old Version 1

changes.mady.by.user Theodore Johnson

Saved on

compared with

New Version Current

changes.mady.by.user Gracielle Molino

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: RT #731563

Image Removed

Expand
titleLicences
AnchorelectricallicenceelectricallicenceCompetencyCompetency RequirementsUpload RequirementsExample DocumentsElectrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1
  • Authorised Service Provider licence to be uploaded
  • Applicant name must be displayed on licence
  • Applicant name must match the name entered into the system
  • Only the front side of the licence needs to be included in the uploaded file
    *registration certificate issued by NSW government is accepted
  • Record the expiry date as it is displayed on the licence
  • If registration letter is uploaded No expiry date required
Electrical.Licence – QLD

Image Added


Expand
titleLicences

Anchor
electricallicence
electricallicence

A Grade - VIC
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

A Clear Screenshot of Ausgrid Competency in the Pegasus system. It must show: 

  • Name & Surname of the contractor as recorded in onsite
  • Ausgrid/Pegasus logo 
  • Fully compliant role ASP LVL 2
  • Expiry date of the role shown in the screenshot
Ausgrid Card is accepted. It must show:
  • Ausgrid Authorisation Level
  • Class Authorised
  • Contractors Name
  • Expiry Date
  • Company AUP # (back side of the card)

Record the date within Onsite:

Issue date = If only an issue date is listed please enter this as the issue date

Expiry date = as stated on the card or screenshot

A Clear Screenshot of Ausgrid Competency in the Pegasus system. It must show: 

  • Name & Surname of the contractor as recorded in onsite
  • Ausgrid/Pegasus logo 
  • Fully compliant role ASP LVL 1
  • Expiry date of the role shown in the screenshot
Ausgrid Card is accepted. It must show:
  • Ausgrid Authorisation Level
  • Class Authorised
  • Contractors Name
  • Expiry Date
  • Company AUP # (back side of the card)
CompetencyCompetency RequirementsUpload RequirementsExample Documents
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1
  • Authorised Service Provider licence to be uploaded
  • Applicant name must be displayed on licence
  • Applicant name must match the name entered into the system
  • Only the front side of the licence needs to be included in the uploaded file
    *registration certificate issued by NSW government is accepted
  • Record the expiry date as it is displayed on the licence
  • If registration letter is uploaded No expiry date required

Electrical.Licence – QLD
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in QLD
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Electrical.Licence.A Grade - ACT
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in ACT
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Image Added

Electrical.Licence.A Grade - VIC
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in VIC
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Image Added

Electrical.Licence.A Grade - TAS
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in TAS
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Electrical.Licence.A Grade - SA
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in SA
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Electrical.Licence.A Grade - WA
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in QLDWA
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Image Added

Electrical.Licence.A Grade - ACT – NT
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in ACTNT
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Image Removed


Electrical.Licence.NSW
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in VICNSW
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence
Image Removed



Electrical.Govt Licence.A Grade - TAS /Authority.Authorised Service Provider (ASP) Level 1
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician showing Authorised Service Provider (ASP) to be uploaded

  • It must not be expired

  • Only the front side is required to be uploaded

  • Full licence or restricted licence Black and white or coloured copy of the document is accepted
  • Must be issued by relevant state Government Authority in TASBlack and white or coloured copy of the document Ausgrid
      *registration certificate issued by NSW government is accepted

Expiry date in Onsite should be recorded as the date which is shown on the Licence

If registration letter is uploaded No expiry date required


Electrical.Govt Licence.A Grade - SA /Authority.Authorised Service Provider (ASP) Level 2
  • Applicants name to be and company must match the displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician showing Authorised Service Provider (ASP) to be uploaded
  • Full licence or restricted licence accepted

    It must not be expired

  • Must be issued

    by relevant state Government Authority in SA

    from a registered RTO or energy provider such as Ausgrid or Endeavour etc.

  • Black and white or coloured copy of the document is accepted
      *registration certificate issued by NSW government is accepted

Expiry date in Onsite should be recorded as the date which is shown on the Licence

Electrical.Licence.A Grade - WA
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in WA
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence

Image Removed

Electrical.Licence.A Grade – NT
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in NT
  • Black and white or coloured copy of the document is accepted
  • Expiry date in Onsite should be recorded as the date which is shown on the Licence
Electrical.Licence.NSW
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Electrician to be uploaded
  • Full licence or restricted licence accepted
  • Must be issued by relevant state Government Authority in NSW
  • Black and white or coloured copy of the document is accepted
Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 1
  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Licence showing Authorised Service Provider (ASP) to be uploaded

  • It must not be expired

  • Only the front side is required to be uploaded

  • Black and white or coloured copy of the document is accepted
  • Must be issued by Ausgrid
      *registration certificate issued by NSW government is accepted

Expiry date in Onsite should be recorded as the date which is shown on the Licence

If registration letter is uploaded No expiry date required

Electrical.Govt Licence/Authority.Authorised Service Provider (ASP) Level 2
  • Applicants name and company must match the displayed on uploaded evidence and to match applicants registered name
  • Licence showing Authorised Service Provider (ASP) to be uploaded

  • It must not be expired

  • Must be issued from a registered RTO or energy provider such as Ausgrid or Endeavour etc.

  • Black and white or coloured copy of the document is accepted
      *registration certificate issued by NSW government is accepted

Expiry date in Onsite should be recorded as the date which is shown on the Licence

If registration letter is uploaded No expiry date required

Image Removed
Company.Induction.Ausgrid Accredited Service Provider LVL2 AuthorisationCompany.Induction.Ausgrid Accredited Service Provider LVL1 Authorisation

Record the date within Onsite:

Issue date = If only an issue date is listed please enter this as the issue date

Expiry date = as stated on the card or screenshot

Expand
titleStatement of Attainment
Anchor
electricalsoaelectricalsoa
CompetencyCompetency RequirementsUpload RequirementsExample Documents
Electrical.Statement of Attainment.ICTCBL2136B - Install, maintain and modify customer premises
  • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
  • The matching competency code needs to be shown
  • Statement of Attainment must be issued by a registered training organisation (RTO)
    • No expiry date is required for this competency upload.

    If registration letter is uploaded No expiry date required

    Image Added
    Company.Induction.Ausgrid Accredited Service Provider LVL2 Authorisation

    A Clear Screenshot of Ausgrid Competency in the Pegasus system. It must show: 

    • Name & Surname of the contractor as recorded in onsite
    • Ausgrid/Pegasus logo 
    • Fully compliant role ASP LVL 2
    • Expiry date of the role shown in the screenshot


    Ausgrid Card is accepted. It must show:

    • Ausgrid Authorisation Level
    • Class Authorised
    • Contractors Name
    • Expiry Date
    • Company AUP # (back side of the card)

    Record the date within Onsite:

    Issue date = If only an issue date is listed please enter this as the issue date

    Expiry date = as stated on the card or screenshot





    Company.Induction.Ausgrid Accredited Service Provider LVL1 Authorisation

    A Clear Screenshot of Ausgrid Competency in the Pegasus system. It must show: 

    • Name & Surname of the contractor as recorded in onsite
    • Ausgrid/Pegasus logo 
    • Fully compliant role ASP LVL 1
    • Expiry date of the role shown in the screenshot


    Ausgrid Card is accepted. It must show:

    • Ausgrid Authorisation Level
    • Class Authorised
    • Contractors Name
    • Expiry Date
    • Company AUP # (back side of the card)

    Record the date within Onsite:

    Issue date = If only an issue date is listed please enter this as the issue date

    Expiry date = as stated on the card or screenshot




    Expand
    titleStatement of Attainment

    Anchor
    electricalsoa
    electricalsoa

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or nearElectrical.Statement of Attainment.Testing of connections to low voltage electricity networks - UETTDRRF11AElectrical.Statement of Attainment.Apply ESI safety rules, COP and procedures for electrical apparatus work - UETTDRRF01BElectrical.Statement of Attainment.UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring
    • Name on certificate to match the person registered
    • Statement of Attainment in "Disconnect/reconnect composite appliances connected to low voltage installation wiring" to be listed
    • Issued by an RTO / Nationally Recognised Training logo
    • No expiry
    • Black and white or colour is acceptable
    Electrical.Trained.TasNetworks - Instructed PersonElectrical.Trained.TasNetworks - Person In ChargeElectrical.Trained.TasNetworks - Level 1 & 2
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • Must be delivered by TasNetworks
    • Must display Level 1 & 2 or Level 1 & 2 Refresher
    Electrical. Statement of Attainment.Power System Meter Install 
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Name of Applicant
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
      • There is no expiry date on a Statement of Attainment or Transcript. **RTO registration must only have been current at the time of training completion / awarding the document

      • Document verifier to ensure the Issue of this document is an RTO.

    DOCUMENT MUST STATE EITHER

    • Power System Meter Install
    • Metering Cat4-21249

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

    Statement of Attainment. 22325VIC.Workplace Spotting for Service Assets
    UEENEEP012A - Disconnect/reconnect composite appliances connected to low voltage installation wiring
    CompetencyCompetency RequirementsUpload RequirementsExample Documents
    Electrical.Statement of Attainment.ICTCBL2136B - Install, maintain and modify customer premises
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • The matching competency code needs to be shown
    • Statement of Attainment must be issued by a registered training organisation (RTO)
    • No expiry date is required for this competency upload.
    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment


    Image Added

    Electrical.Statement of Attainment.ICTOHS2153B - Work Safely Near Power Infrastructure
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • The matching competency code needs to be shown
    • Statement of Attainment must be issued by a registered training organisation (RTO)
    • No expiry date is required for this competency upload.
    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment



    Electrical.Statement of Attainment.Electrical Equipment in Hazardous Areas
    • Name on certificate to match the person registered
    • Statement of Attainment in Electrical Equipment in Hazardous Areas to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • No expiry

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    Image Added
    Anchor
    UETTDRRF09
    UETTDRRF09
    Electrical.Statement of Attainment.UETTDRRF09B - Apply access procedures to work on or near
    • Name on certificate to match the person registered
    • Statement of Attainment in "Apply access procedures to work on or near electrical network infrastructure" to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • No expiry

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment

    Anchor
    UETTDRRF11A
    UETTDRRF11A
    Electrical.Statement of Attainment.Testing of connections to low voltage electricity networks - UETTDRRF11A
    • Name on certificate to match the person registered
    • Statement of Attainment in "Testing of connections to low voltage electricity networks" to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    • Expiry to be recorded as 1 year from date of issue

    Anchor
    UETTDRRF01B
    UETTDRRF01B
    Electrical.Statement of Attainment.Apply ESI safety rules, COP and procedures for electrical apparatus work - UETTDRRF01B
    • Name on certificate to match the person registered
    • Statement of Attainment in "Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus" to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • No expiry

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment

    Anchor
    UEENEEP012A
    Image Removed
    UEENEEP012A
    Electrical.Statement of Attainment.
    ICTOHS2153B - Work Safely Near Power Infrastructure
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • The matching competency code needs to be shown
    • Statement of Attainment must be issued by a registered training organisation (RTO)
    • No expiry date is required for this competency upload.
    Electrical.Statement of Attainment.Electrical Equipment in Hazardous Areas
    • Name on certificate to match the person registered
    • Statement of Attainment in Electrical Equipment in Hazardous Areas to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • No expiry

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    Image Removed
    Anchor
    UETTDRRF09UETTDRRF09
    • Name on certificate to match the person registered
    • Statement of Attainment in "Apply access procedures to work on or near electrical network infrastructure" to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • No expiry

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    Anchor
    UETTDRRF11AUETTDRRF11A
    • Name on certificate to match the person registered
    • Statement of Attainment in "Testing of connections to low voltage electricity networks" to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    • Expiry to be recorded as 1 year from date of issue
    Anchor
    UETTDRRF01BUETTDRRF01B
    • Name on certificate to match the person registered
    • Statement of Attainment in "Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus" to be listed

    • Issued by an RTO / Nationally Recognised Training logo

    • No expiry

    • Black and white or colour is acceptable

    • The Issue date in Onsite should be recorded as the date of completion shown on the statement of attainment
    Anchor
    UEENEEP012AUEENEEP012A
    • Only issue date to be recorded
    Anchor
    instructedpersoninstructedperson
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • Must be delivered by TasNetworks
    • Must display Instructed Person or Instructed Person Refresher
    • Issue date recorded as per the certificate
    • Expiry date – two years from issue date
    Anchor
    personinchargepersonincharge
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • Must be delivered by TasNetworks
    • Must display Instructed Person in Charge or Person in Charge Refresher
    • Expiry and issue date recorded as per the certificate
    Image Removed
    Anchor
    level1and2level1and2
    • Expiry and issue date recorded as per the certificate
    		 
    Anchor
    meterinstallmeterinstall
    • Name on certificate to match the person registered
    • Statement of Attainment in "Disconnect/reconnect composite appliances connected to low voltage installation wiring" to be listed
    • Issued by an RTO / Nationally Recognised Training logo
    • No expiry
    • Black and white or colour is acceptable


    • Only issue date to be recorded

    Anchor
    instructedperson
    instructedperson
    Electrical.Trained.TasNetworks - Instructed Person
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • Must be delivered by TasNetworks
    • Must display Instructed Person or Instructed Person Refresher
    • Issue date recorded as per the certificate
    • Expiry date – two years from issue date

    Anchor
    personincharge
    personincharge
    Electrical.Trained.TasNetworks - Person In Charge
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • Must be delivered by TasNetworks
    • Must display Instructed Person in Charge or Person in Charge Refresher
    • Expiry and issue date recorded as per the certificate
    Image Added
    Anchor
    level1and2
    level1and2
    Electrical.Trained.TasNetworks - Level 1 & 2
    • The applicants name shown on this statement of attainment needs to match the applicants registered name in Onsite
    • Must be delivered by TasNetworks


    • Must display Level 1 & 2 or Level 1 & 2 Refresher
    • Expiry and issue date recorded as per the certificate

     

    Anchor
    meterinstall
    meterinstall
    Electrical. Statement of Attainment.Power System Meter Install

    		 
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Name of Applicant
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
      • There is no expiry date on a Statement of Attainment or Transcript. **RTO registration must only have been current at the time of training completion / awarding the document

      • Document verifier to ensure the Issue of this document is an RTO.

    DOCUMENT MUST STATE EITHER

    • Power System Meter Install
    • Metering Cat4-21249


    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code



    Statement of Attainment. 22325VIC.Workplace Spotting for Service Assets
    • Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
    • Must list “22325VIC Course in workplace Spotting for Service Assets“
    • Must be issued by a registered RTO
    • Issue date to be recorded as per the certificate
    • Expiry Date 3 years from issue

    Electrical.Course.Low Voltage Rescue Training
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Organisation name to be displayed on document
    • Statement of Attainment will show completion of:
      • Low Voltage Rescue Training
      • Perform Rescue from a Live LV Panel
    • Document / Certificate / Number
    • Issue date to be recorded as shown on the document
    • Expiry date = 1 year from issue date



    Expand
    titleCertificate


    “22325VIC Course in workplace Spotting for Service Assets“ a registered RTO the Date issue
    CompetencyCompetency RequirementsUpload RequirementsExample Documents

    Anchor
    instrumentation
    instrumentation
    Electrical.Certificate IV.Instrumentation – Electrical

    • Name on certificate to match the person registered (However shortened first names such as 'Chris' for 'Christopher' are accepted)
    • Certificate IV in UEE40410 - Instrumentation – Electrical or Certificate IV in UEE40411 - Instrumentation – Electrical to be listed
    • No expiry
    • Black and white or colour acceptable
    • The Issue date in Onsite should be recorded
     Image Added
    CompetencyCompetency RequirementsUpload RequirementsExample Documents
    Anchor
    spotter
    spotter
    Electrical.Qualified.Energy Safe Victoria - Electrical Spotter 
    • Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
    • Must list
    • 'Spotter Registration Certificate'
    • Must be issued by
    • Energy Safe Victoria
    • Must show the Energy Safe Victoria logo
    • Issue date to be recorded as per
    • certificate / card
    • Expiry
    • = 3 years from
    Expand
    titleCertificate
    instrumentation
    • Issue Date
    IVInstrumentation – Name on certificate to match the person registered
  • Certificate IV in UEE40410 - Instrumentation – Electrical or Certificate IV in UEE40411 - Instrumentation – Electrical to be listed
  • No expiry
  • Black and white or colour acceptable
    • spotterspotterQualifiedEnergy Safe Victoria - Electrical Spotter 
  • Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
  • Must list 'Spotter Registration Certificate'
  • Must be issued by Energy Safe Victoria
    • Must show the Energy Safe Victoria logo as per certificate / card = 3 years from Issue Date

    Electrical.Trade.Electrical Fitter (Instruments)
    Anchor
    instrumentation
     Image Added
    Anchor
    waterindustry
    waterindustry
    Electrical.Certificate
    .
    Electrical
    Safety in Water Industry
    • Applicants name on document to match applicants name in Onsite (However shortened first names such as 'Chris' for 'Christopher' are accepted)
    • Document WTR-TR-601B – Electrical Safety Training- Competency Assessment to be attached
    • The Issue date in Onsite should be recorded as the date of assessment 
     Image Modified
    Anchor
    electricaltradefitterinstruments
    electricaltradefitterinstruments
    Electrical.
    Trade.
    Electrical Fitter (Instruments)
    •  Name on certificate to match the person registered
    • Certificate in Electrical Fitter (Instruments) to be listed

    • Black and white or colour acceptable

    • Must be clearly scanned and legible

    • Issue date to be recorded

    • No Expiry

     Image Removed
    Anchor
    waterindustrywaterindustry
    • Issue Date = Date of completion
    • Expiry Date = No expiry date to be entered
    Image Added

    Electrical.Certificate

    .Electrical Safety in Water IndustryApplicants name on document to match applicants name in Onsite (However shortened first names

    III.UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing

        Applicants name to be shown on documentation
        Applicants name must match (However shortened versions such as 'Chris' for

    '

    Christopher

    ' are

    can be accepted)

  • Document WTR-TR-601B – Electrical Safety Training- Competency Assessment to be attached
    • The Issue date in Onsite should be recorded as the date of assessment 
     Image Removed
    Anchor
    electricaltradefitterinstrumentselectricaltradefitterinstruments
    •  Name on certificate to match the person registered
    • Certificate in Electrical Fitter (Instruments) to be listed

    • Black and white or colour acceptable

    • Must be clearly scanned and legible

    • Issue date to be recorded

    • No Expiry

    • Issue Date = Date of completion
    • Expiry Date = No expiry date to be entered
    Image Removed

    Electrical.Certificate III.UET30812     RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
        Completion date or issue date must be displayed
        Course code to be listed on certificate to match the nominated coding and title within Onsite
        Name and / or signature of issuer
        Document / Certificate / Number
        No expiry

        Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date


    Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Cable JointingOverhead (Linesman)

        Applicants name to be shown on documentation
        Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
        RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
        Completion date or issue date must be displayed
        Course code to be listed on certificate to match the nominated coding and title within Onsite
        Name and / or signature of issuer
        Document / Certificate / Number
        No expiry

        Record the Issue date within Onsite:

    Completion date - if listed on certificate (this completion date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    Electrical.Certificate III.UET30612 - Certificate III in ESI - Power Systems - Distribution Overhead (Linesman)

        Applicants name to be shown on documentation
        Applicants name must match (However shortened versions




    Expand
    titleApprenticeship


    CompetencyCompetency RequirementsUpload RequirementsExample Documents

    Anchor
    apprenticeship
    apprenticeship
    Electrical Apprenticeship Registration

    • Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus (However shortened versions of names such as 'Chris' for
    Christopher can be accepted)
        RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
        Completion date or issue date must be displayed
        Course code to be listed on certificate to match the nominated coding and title within Onsite
        Name and / or signature of issuer
        Document / Certificate / Number
        No expiry    Record the Issue date within Onsite:
    Completion date - if listed on certificate (this completion date is always used when displayed)
    Issue date - If only an issue date is listed please enter this as the issue date
    • 'Christopher' is accepted.
    • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Avetta will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
    • The uploaded evidence will be a copy of the applicants completed and signed Apprenticeship Indenture Papers or applicants Traineeship / Apprenticeship Agreement
    • The evidence must indicate the apprenticeship is / was for the relevant trade which aligns to their role selection
    • The date of commencement / enrollment on the evidence should be recorded as the Issue Date
    • Expiry date = none