Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Image Removed

Image Added


Expand
titleSafety

Anchor
safety
safety

Competency NameCompetency RequirementsUpload RequirementsExamples
Safety.-.Working with Children
  • WWCC Card to show applicants name that must match the name registered
  • Screenshot of the status from Working with Children Database accepted
  • WWCC Number must be listed
  • Black and white or colour copy acceptable

Further information around this can be found at: https://www.kidsguardian.nsw.gov.au/child-safe-organisations/working-with-children-check

  • Issue Date = As per evidence
  • Expiry Date = 5 years from Issue Date


When a Nationally recognised statement of attainment or transcript is uploaded:

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
  • When a Laing ORourke CSM Leadership Training Requirements Record is uploaded:

    • Applicant Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Specific unit of competency must be shown on the sheet that aligns to this competency code
    • Approval section must be completed

    When a Sydney Metro issued SMIC Interim Certificate is uploaded:

    • Applicant Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
    • Applicant RIW ID on this document must match Pegasus ID number in Onsite Track Easy
    • Certificate will display 'SMIC Interim Certificate' and relevant Sydney Metro - Introduction to Leadership
    Competency NameCompetency RequirementsUpload RequirementsExamples
    Site.Induction.Sydney Metro Orientation Training SMOT

    When A Sydney Metro Participant results record sheet (issued by Tafe) is uploaded:

    • Applicants name must be shown on paperwork
    • Black and white or colour copies accepted
    • This can be accepted as evidence of having completion this orientation (despite not clearly stating Sydney Metro Orientation Training) as all attendees who have received this results sheet have already complete the orientation training prior to being issued with this.
    • Course information in the first section of the form must be completed in full (minimum of one trainer/assessor name to be stated)
    • Worker details in second section – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
    • Last section of form is to have a trainer name and signature at the bottom of the page
    • If the Tafe issued SOA is uploaded with the specified units on competency then this will also be accepted


    When a SMOT Daily Attendance Record sheet is uploaded:

    • Applicants name must be shown on paperwork
    • Black and white or colour copies accepted
    • Applicants signature must be shown

    NOTE: SMIC form without Unique Student Identifier listed can be accepted.


    When a SMOT Statement of Completion is uploaded:

    • Applicants name must be shown on paperwork
    • Will show Laing O'Rourke OR Sydney Metro OR Lendlease and Pegasus Logos
    • Will show 'Project.Induction. Sydney metro Orientation Training Online Induction' as a delivered competency
    • Black and white or colour copies accepted


    NOTE: LOR SSJ project induction attendance record is not acceptable for this competency. It's for the site induction which is different paperwork to the SMOT induction.

    • Pegasus Staff CLICK HERE for additional business rule information prior to completing file verification in Onsite Track Easy
    • Photo of the form can be accepted in lieu of actual scanned copy providing all information can still be clearly seen
    • Issue date = Date of completion / end date for training displayed on the induction paperwork
    • Start date can be used as issue date where there is no end date
    Site.Trained.SMIC Training


    When a Nationally recognised statement of attainment or transcript is uploaded:

    Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

    When a Tafe issued participant results record is uploaded:

    Expiry date = Is NOT required

    When a Laing ORourke CSM Leadership Training Requirements Record is uploaded:

    Expiry date = Is NOT required

    When a Sydney Metro issued SMIC Interim Certificate is uploaded:

    Expiry date = As displayed on the certificate

    Competency NameCompetency Requirements
    OH&S-WHS.Induction.Construction ACT
    OH&S-WHS.Induction.Construction NSW
    OH&S-WHS.Induction.Construction NT
    OH&S-WHS.Induction.Construction QLD
    OH&S-WHS.Induction.Construction SA
    OH&S-WHS.Induction.Construction TAS
    OH&S-WHS.Induction.Construction VIC
    OH&S-WHS.Induction.Construction WA


    Competency NameCompetency RequirementsUpload RequirementsExamples
    Working at Height.Qualified.Work safely at heightsRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Manual Handling.Qualified.Manual HandlingRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Confined Space.Qualified.Enter and Work in Confined SpacesRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Gas Tester.Qualified.Gas Test AtmospheresRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Health & Safety.Qualified.Health and Safety Representatives (HSR)
    • Issue Date = As per evidence
    • Expiry Date = None

    Site Services.Qualified.Monitor and Evaluate NoiseRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Chemical Storage.Qualified.Hazardous Chemical Handling and StorageRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Underground Services.Qualified.Identify, Locate and Protect Underground ServicesRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    OH&S-WHS.Induction.Work safely in construction industryRefer to national business rule for statement of attainments and transcripts for issue and expiry date information
    Water.Qualified.Waterproofing course
    • 'Waterproofer' to be listed
    • Must be issued by State Government body and logo to be displayed
    • Must be a Contractor Licence (or registration in VIC)
    • Duration as per licence
    • Black & white or colour is acceptable

    Issue Date = As per licence (if not displayed please leave blank

    Expiry = As per licence


    CPCCCM2007B Explosive Power Tool

    Onsite competency name TBC




    CPCCCO3047A Concrete Cutting (CC)

    Onsite competency name TBC






    Expand
    titleSMIC Training


    Expand
    titleDemolition

    Anchor
    smic-demolition
    smic-demolition

    Competency NameCompetency RequirementsUpload RequirementsExamples
    Site.Trained.SMIC Training - Demolition - Introduction

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      4. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      4. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None

    Site.Trained.SMIC Training - Demolition - Experienced

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCCM2001A - Read and interpret plans and specifications
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCCM2001A - Read and interpret plans and specifications
      2. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      3. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3017A - Select and use hand tools and equipment for demolition tasks


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None

    Site.Trained.SMIC Training - Demolition - Nominated Supervisor

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
      3. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      7. CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
      8. CPCCBC4012B - Read and interpret plans and specifications
      9. CPCCDE4001A - Plan and prepare for activities on demolition sites
      10. CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
      11. CPCCDE4003A - Supervise individual activities on demolition sites
      12. CPCCDE4004A - Finalise demolition activities and supervise property handover

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
      2. CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
      3. CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
      4. CPCCDE3018A - Select and use small plant and equipment for demolition tasks
      5. CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
      6. CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
      7. CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
      8. CPCCBC4012B - Read and interpret plans and specifications
      9. CPCCDE4001A - Plan and prepare for activities on demolition sites
      10. CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
      11. CPCCDE4003A - Supervise individual activities on demolition sites
      12. CPCCDE4004A - Finalise demolition activities and supervise property handover


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None

    CPCCDE3016A Identify hazards on demolition sites and apply risk management strategies

    Onsite competency name TBC




    CPCCDE3018A Select and use small plant and equipment for demolition tasks

    Onsite competency name TBC




    CPCCDE3019A Demolish small buildings and structures using hand tools and small plant and equipment

    Onsite competency name TBC




    CPCCDE3020A Select and use tools and equipment for hot work in the demolition industry

    Onsite competency name TBC




    CPCCDE3022A Manage demolition recyclables and waste materials using loading shifting equipment

    Onsite competency name TBC




    CPCCDE4001A Plan and prepare for activities on demolition sites

    Onsite competency name TBC




    CPCCDE4002A Plan and supervise demolition works to minimise environmental and public health and safety impact

    Onsite competency name TBC




    CPCCDE4003A Supervise individual activities on demolition sites

    Onsite competency name TBC




    CPCCDE4004A Finalise demolition activities and supervise property handover

    Onsite competency name TBC






    Expand
    titleCivil Construction

    Anchor
    smic-civilconstruction
    smic-civilconstruction

    Competency NameCompetency RequirementsUpload RequirementsExamples
    Site.Trained.SMIC Training - Civil Construction - Introduction Skills Course

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. RIIRIS201D - Conduct local risk control
      2. RIIWHS201D - Work safely and follow WHS policies and procedures

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. RIIRIS201D - Conduct local risk control
      2. RIIWHS201D - Work safely and follow WHS policies and procedures


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None



    Expand
    titleHeavy Haulage

    Anchor
    smic-heavyhaulage
    smic-heavyhaulage

    Competency NameCompetency RequirementsUpload RequirementsExamples
    Site.Trained.SMIC - Heavy Haulage - Introduction Skills

    When statement of attainment is uploaded:

    • RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • Name and / or signature of issuer
    • Document / Certificate / Statement of Attainment Number
    • Nationally Recognised Training logo
    • No expiry
    • Must show completion of the following units of competency:
      1. TLIF0078 - Recognise motor vehicle road crash risks and post-crash actions

    When transcript (accepted in lieu of SOA) is uploaded:

    • RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
    • Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
    • Completion date or issue date must be displayed
    • If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
    • No expiry
    • Must show completion of the following units of competency:
      1. TLIF0078 - Recognise motor vehicle road crash risks and post-crash actions


    Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded.

    When statement of attainment is uploaded:
    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
    • Expiry Date = None


    When transcript (accepted in lieu of SOA) is uploaded:

    • Issue Date =
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date
      • If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
    • Expiry Date = None