Content Comparison

• Copy must be clear and legible
• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

Issue Date= Course completion date

Expiry Date= 2 years from course completion date

The required evidence will be

one of the following:

• • • • Certificate or competency card

• • • • issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management
      • Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8
• Date of training completion must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date=

Course completion date

Expiry Date=

2 years from

course completion date

The

evidence will be

:

• • • Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems

• Assessment Completion date must be visible
• Where Waipa Representative signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris'

• for 'Christopher' is accepted).
• Applicant must have signed induction form
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUSTbe provided

Issue Date= Induction date on evidence

Expiry Date = 2 years from induction date

Electrical.Course.Meridian EAC

The required evidence will be one of the following:

• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
• Email confirmation from @meridianenergy.co.nz of EAC Course completion
• Evidence must be valid and visible date
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris

• ' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Copy must be clear and legible
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date exceeds 2 years or has expired, an additional refresher or course completion of either

• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites”
• Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided

Issue Date = On evidence

 The required evidence will be either of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
    • Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D
    • Email confirmation from @scanpower.co.nz of course completion of “close approach”
• Evidence must be valid and in date
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date exceeds 2 years, an additional

refresher or course completion of either

• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach”
• Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies”
• Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided

Issue Date =

On evidence

The evidence will be

one of the following:

• • • Unison Declaration of Competency to Access  

• Course Completion date must be visible
• Where assessor /

• trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date =

as per evidence

The required evidence will be one of the following:

• Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion

AND

• • • NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion or date of unit standard achieved must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing

The evidence will be

one of the following:

• • • Certificate

• • • or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
    • Attendance record from a NZQA training organisation showing Powerco Network Safety Induction  

• Course Completion date must be visible
• Where assessor /

• trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction
• Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUSTbe provided

Issue Date =

On evidence

The evidence will be one of the following:

• • • Certificate or competency card showing course completion of a Powerco High Voltage Isolation and Access Procedures
    • Certificate must display the Powerco logo

• Course Completion date must be visible
• Pass Number MUST be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2 years, an additional

certificate showing on of the following

• Certificate or competency card showing course completion of a Powerco High Voltage Isolation and Access Procedures
• Attendance record showing Powerco HVIAP – PASS numberMUSTbe provided

Issue Date = On evidence

Power.Course.Powerco Operational Communication

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
    • Attendance record from a NZQA training organisation showing Powerco Operational communication

• Course Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Colour copy or black and white copy

• is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2

year, an additional

certificate showing on of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication
• Attendance record from a NZQA training organisation showing Powerco Operational communicationMUST be provided

Issue Date =

On evidence

The required evidence will be

:

• • • Powerco Appendix A – Contract Works Manual Standard Clarification Notification document
• Must show Competency Class 5C Adjacent Communications Work
• The evidence Must have Powerco’s Logo and match example document
• The evidence Must have PDF format
• Where “declaration completed by” must be filled out with Company, position, signature and date
• Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).

• Declaration must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date:=

Date signed

Electrical.Induction.Vector Network Safety (WTC1)

The evidence will be one:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector Network Safety Induction or Vector WTC 1 Induction course

• Assessment Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Colour copy or black and white copy

• is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date=

The course date

Expiry Date = 2 years

from issue date

The evidence will be

one of the following:

• • • Certificate

• • • or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
    • Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number

• Assessment Completion date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2
• Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUSTbe provided

Issue Date= The course date

Expiry Date = 2 years from issue date

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
    • Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds

2 year, an additional

certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3
• Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

Power.

Document.Vector Electricity Core Instruction WTC 5

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5
    • Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from

• a NZQA accredited training organisation showing course completion of Vector WTC 5
• Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

Power.

Document.Vector Electricity Core Instruction WTC 6 Attestation

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of

• • • Vector WTC 6
    • Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and

• white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6
• Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

 The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7
    • Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds

2 year, an additional certificate showing one of the following

• Certificate or competency card issued from

• a NZQA accredited training organisation showing course completion of Vector WTC 7
• Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

The evidence will be

one of the following:

• • • Certificate

• • • or competency card issued from a NZQA accredited training organisation showing

• • • course completion of Vector WTC 7A
    • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy

• must be clear and legible
• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2

year, an additional

certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing

• course completion of Vector WTC 7A
• Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

Power.

Document.

Vector Electricity Core Instruction WTC 8

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of

• • • Vector WTC 8
    • Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of

• Vector WTC 8
• Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

Power.

Document.

Vector Electricity Core Instruction WTC 8A

The

evidence will be one of the following:

• • • Certificate or

• • • competency card issued from a NZQA accredited training organisation showing course completion of

• • • Vector WTC 8A
    • Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Colour copy or black and white copy is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2

year, an additional certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing

• course completion of Vector WTC 8A
• Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
    • Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where

• assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).

• Copy must be clear and legible
• Colour copy or black and white copy is

• acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 year, an additional

certificate showing one of the following

• Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B
• Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUSTbe provided

Issue Date =

On evidence

Power.

Document.Vector Electricity Core Instruction WTC 8C

The

evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • course completion of Vector WTC 8C
    • Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Colour copy or black and white copy

• is acceptable
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2

year, an additional

certificate showing one of the following

• Certificate or competency card issued

• from a NZQA accredited training organisation showing course completion of Vector WTC 8C
• Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUSTbe provided

Issue Date = On evidence

Power.

Document.Vector Electricity Core Instruction WTC 10 Attestation

 The required evidence will be

one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of

• • • Vector WTC 10
    • Downer form for Vector WTC Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence date exceeds 2 years,

and additional certificate issued from a NZQA  showing Vector WTC 10 MUST be provided

Issue Date = On evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Vector Electricity Equipment Type Assessment 
    • Vector Electricity Equipment Type Assessment 
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion

• must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

Power.Document.Vector WTC 1 Attestation with 3 site visits

 The evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing course completion of

• • • Vector WTC 7A
    • Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements
    • Log book showing 3 site visits with manager/supervisor sign off

• Assessment Completion and expiry date must be visible
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = On evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of

• • • Vector WTC 10
    • Downer form for Vector WTC Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear

• and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
    • Downer form for Wellington Electricity 
      • • Must state Switchgear Types - LV Fuse Gear
        • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date =

as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear
    • Downer form for Vector WTC Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).

• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date

=

as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Vector

• • • WTC 10
    • Downer form for Vector WTC Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date =

as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Vector

• • • WTC 10
    • Downer form for Vector WTC

• • • Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Vector WTC

• • • 10
    • Downer form for Vector WTC

• • • Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Vector WTC

• • • 10
    • Downer form for Vector WTC

• • • Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear

• and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

The required evidence will be one of the following:

• • • Certificate or competency card issued from a NZQA accredited training organisation showing

• • • completion of Vector WTC

• • • 10
    • Downer form for Vector WTC

• • • Attestation
      • • Must show Vector WTC 10
        • Must contain comments
        • Must be signed by manager
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Date of training completion must be visible
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date = as per evidence

The evidence will be the following:

• Certificate showing Permit Recipient For Lines (PRL) or (PR) completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2

years, an additional

certificate showing Permit Recipient For Lines (PRL) or (PR) course completion MUST be provided

Issue Date=

 Course completion date

Expiry

Date=

2 years from

course completion date

The evidence will be

a:

• Certificate

• showing Condition Assessor or refresher Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2

years, an additional

certificate showing Condition Assessor or refresher course completion MUST be provided

Issue Date=

 Course completion date

Expiry

Date=

2 years from

course completion date

The evidence will be

a:

• Certificate

• showing Maintenance Switcher (MS) or Field Operator (FO) or refresher Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Where the evidence completion date exceeds 2

years, an additional

certificate showing Maintenance Switcher (MS) or Field Operator (FO) or refresher course completion MUST be provided

Issue Date=

 Course completion date

Expiry

Date=

2 years from

course completion date

The evidence will be

a:

• Certificate showing Foundations Curriculum Certificate
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Colour copy or black and white copy is acceptable

Issue Date=

 Course completion date

Expiry

Date=Non-expiring

Electrical.Course.Transpower Vegetation Control (VC)

The evidence will be

a:

• Certificate showing Vegetation Control (VC) course completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

Colour copy or black and white copy

is acceptable

Issue Date=

 Course completion date

Expiry

Date=

2 years from

course completion date

The evidence will be

a:

·        Downer Letter authorisation to enter land from Transpower

• Evidence will be issued by Downer ONLY
• Issue date must be visible
• Description of what authorisation covers, list of sites, Asset owner, Downer Contract Manager name and signature
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

Colour copy or black and white copy is acceptable

Issue Date=

 Docuement completion date

Expiry

Date= 1 years from

course completion date

The evidence will be

a:

• Certificate

• showing Technical Expert course completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

Colour copy or black and white copy

is acceptable

Issue Date=

 Course completion date

Expiry

Date=

2 years from

course completion date

The evidence will be

a:

• Certificate

• showing SF6 Test and Top-up course completion
• Evidence will be issued by Gridskills ONLY
• Course Completion date must be visible
• Where assessor /

• Transpower CEO signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in

• Workforce (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible

Colour copy or black and white copy is acceptable

Issue Date=

 Course completion date

Expiry

Date= Non-Expiring