Page Comparison

title	Licences

Expand

title	Statement of Attainment

For the Statement of Attainment or Transcript:
Any Registered Training Organisation (RTO) with this unit of competency on scope can issue the qualification. RTO registration must

• Applicants name should be displayed on the evidence and should match the applicant name that's registered in Pegasus to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.

Accepted Form/s of Evidence:

1. Statement of Attainment OR Transcript showing UETTDREL16
2. Statement of Attainment OR Transcript showing UETDREL005  - This is considered equivalent/higher qualification

RPL'ed units on transcript are acceptable

• acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document

.

Statement of Attainment must comply with ASQA Requirements per:

https://www.asqa.gov.au/vet-registration/meet-requirements-ongoing-registration/issue-qualifications-and-statements

NOTE:  RTO Training

• Document verifier to ensure the Issue of this document is an RTO.
• Accepted Course Titles / Codes:
  • UETTDREL18

  • UETDRAI001 

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

2. Australian Electricity Supply Industry (ESI) issued skills passport is accepted.

• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must include page of passport that shows ‘UETTDREL16 - Working safely near live electrical apparatus’ as having been achieved with:
  • Ausgrid or Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name & Signature

3. RTO issued Card or Certificate showing completion of course in Working Safely Near overhead and underground assets

Upon verification; an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date: Not Required

Pegasus Staff click here to read additional crucial business rule information prior to file verification

For the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  

NOTE: Cards

• an RTO.

• Accepted Course Titles / Codes:

• UETDRAI002 - Inspect poles, hardware and electrical apparatus.
• No expiry

• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

NOTE: RPL can be accepted for this competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

AnchorUETTDREL18UETTDREL18Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatusFor the Statement of Attainment or Transcript:

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

 RTO Name, Code and Logo

 Name of Applicant

Units of competency code and name, date completed

Date certificate issued

it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

There is no expiry date on a Statement of Attainment or Transcript.

Document verifier to ensure the Issue of this document is an RTO Cards from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit codeRecord the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

AnchorUETTDREL19UETTDREL19Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry For the Statement of Attainment or Transcript:
Applicants name to be shown on document

NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:

Image Added

NOTE: Course code has changed to UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus

For Pegasus LMS Issued Certificate:

AnchorUETTDRRF01UETTDRRF01Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

For the Statement of Attainment or Transcript:

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
Document verifier to ensure the Issue of this document is an RTO.

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

• Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
  Pegasus Staff click here to read additional crucial business rule information prior to file verification

lectrical.Statement of Attainment - Perform Pole Top Rescue or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo

Name

• Units of

Applicant

Accepted units of competency:

• UETTDRRF01 - Issued by Aurecon is accepted. Please see the attached example.
• UETSS00019
• UETSS00037

• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

Expand

title	Additional BR information for ASP pending data only; Not Ausgrid Partners

NOTE: All ASP1 authorisations - Ausgrid’s Electrical Safety Rules UETTDRRF01 training is to be delivered through Ausgrid’s Training Group only. Training provided by another RTO or Distributor will not be recognised.

NOTE: All ASP2 authorisations - must complete their initial Ausgrid Electrical Safety Rules UETTDRRF01 training with Ausgrid’s Training Group. After the initial training, the annual refresher training can be completed with Ausgrid’s Training Group or a Registered Training Organisation (RTO) approved to deliver the Ausgrid aligned Electrical Safety Rules UETTDRRF01 training.

Where an individual holds both Level 1 & Level 2 ASP authorisations, Ausgrid delivered Electrical Safety Rules UETTDRRF01 must be delivered through Ausgrid’s Training Group only

• competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:
NOTE: Cards

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• **RTO registration must only have been current at the time of training completion / awarding the document

• Statement of Attainment or training cards provided by an external RTO must indicate that the Ausgrid aligned version of ‘UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work’ has been completed.

• Document verifier to ensure the Issue of this document is an RTO.
  
  
• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
  
  • • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows

UETTDRRF01 or ESI Safety Rules or ESR 

• ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with

:

• • Ausgrid / Energy Australia stamp being shown on this page
  • Date of Training
  • Trainer / Assessor Name
  • Signature

NOTE: From 28.10.20220 if there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved:

Image Removed

For Pegasus LMS Issued Certificate:

• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Certificate will show completion of either: Electrical Safety Rules Initial OR Electrical Safety Rules Refresher
• Certificate will show both Pegasus and Ausgrid Logos
• Date of completion will be shown:
  
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
  Pegasus Staff click here to read additional crucial business rule information prior to file verification

lectricalElectrical.Statement of Attainment - Perform Pole Top Rescue LV Release & Rescue from an EWP or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

AnchorUETTDRRF02UETTDRRF02

Electrical.Statement of Attainment - Perform Pole Top Rescue 

For the Statement of Attainment or Transcript:

• of the Ausgrid Training
• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO )** must meet the following requirements to be approved: RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• **RTO registration must only have been current at the time of training completion / awarding the document
Document verifier to ensure the Issue of this document is an RTO.

• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
  
  • • Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows ‘UETTDRRF02’ or 'UETDRRF003' as having been achieved with:
  
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).
  Pegasus Staff click here to read additional crucial business rule information prior to file verification

Electrical.Statement of Attainment - LV Release & Rescue from an EWP or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF002
• UETTDRRF03 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualificationbooked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF002
• UETTDRRF03 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue Or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit codeThe date of completion on the evidence should be recorded as the Issue Date in Pegasus

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed

,

• please enter this as the issue

dateExpiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

• date

Electrical.Statement of Attainment.UETTDRRF04 UETTDRRF05 - Perform tower rescue Or Rescue from Switchyard Structures at Heights  Or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)Issue date - If only an issue date is listed please enter this as the issue datecompletion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.Booking confirmation -  - Perform rescue from a live LV panel

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

UETTDRRF05 Rescue from Switchyard Structures at Heights  Or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

AnchorUETTDRRF05UETTDRRF05Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights For the Statement of Attainment or Transcript:

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

 RTO Name, Code and Logo

 Name of Applicant

Units of competency code and name, date completed

Date certificate issued

Authorised person name or title (does not necessarily need a signature)

Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

There is no expiry date on a Statement of Attainment or Transcript.

**RTO registration must only have been current at the time of training completion / awarding the document

Document verifier to ensure the Issue of this document is an RTO.

For the Statement of Attainment or Transcript:

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF004
• UETTDRRF06 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:Completion date - if listed on certificate (this completion date is always used when displayed)

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the

issue date

issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).Electrical.Statement of Attainment.Booking confirmation -  UETTDRRF07 - Perform rescue from a live LV panelcable pit/trench/excavation rescue or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRRF004
• UETTDRRF06 (Completion date must be prior to 20/09/2022)
• 12-month expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualificationFor the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit codeThe date of completion on the evidence should be recorded as the Issue Date in Pegasus

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed

,

• please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue Attainment  - CCD Release & Rescue from an EWP or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

For the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO..
  
  
• From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

Authorised person name or title (does not necessarily need a signature)

Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Document verifier to ensure the Issue of this document is an RTO.

From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with:
  
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

AnchorUETTDRRF09UETTDRRF09

Electrical.Statement of Attainment- Apply access procedures to work on or near electrical network infrastructure

For the Statement of Attainment or Transcript:

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

 RTO Name, Code and Logo

 Name of Applicant

Units of competency code and name, date completed

Date certificate issued

Authorised person name or title (does not necessarily need a signature)

Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Document verifier to ensure the Issue of this document is an RTO.
From 17/9/2021 Tafe NSW will issue interim Knwledge assesment ( see example document labelled SOA Tafe NSW)

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment  - CCD Release & Rescue from an EWP or Booking confirmation

When Booking Confirmation is Uploaded:

• This competency now accepts a Booking confirmation for the course they are completing 
• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training
• Applicants name to be shown on document
• RTO Name, Code and Logo
• Units of competency code and name, date booked for

• For Booking Confirmation documents the expiry date is to be an end date of the Ausgrid Training

Electrical.Statement of Attainment UETTDRRF08B - CCD Release & Rescue from an EWP

For the Statement of Attainment or Transcript:

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

 RTO Name, Code and Logo

 Name of Applicant

Units of competency code and name, date completed

Date certificate issued

indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

For the Skills Passport:

• Australian Electricity Supply Industry (ESI) issued skills passport is accepted. It must show:
• Must include either a page of the passport document that shows the applicants name OR include a copy of the applicants photo identification card that shows their name within the uploaded file as a declaration that the stamped page of the passport does belong to this applicant
• Uploaded document must also include page of passport that shows ‘UETTDRRF08B’ as having been achieved with:
  
  • • Ausgrid / Energy Australia stamp being shown on this page
    • Date of Training
    • Trainer / Assessor Name
    • Signature

NOTE: If there is a signed sticker instead of a stamp with the trainers name with the relevant competency listed, it can be approved

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date
• Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).

Pegasus Staff click here to read additional crucial business rule information prior to file verification

For the Statement of Attainment or Transcript:

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

 RTO Name, Code and Logo

 Name of Applicant

Units of competency code and name, date completed

Date certificate issued

Authorised person name or title (does not necessarily need a signature)

Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Document verifier to ensure the Issue of this document is an RTO.

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC006

• UETTDRVC21 (Completion date must be prior to 20/09/2022)

• 12-month expiry

• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4 week expiry for this documentation).For the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Electrical.Statement of Attainment.Assess vegetation in an electricity supply industry environment

For the Statement of Attainment or Transcript:

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC002
• UETTDRVC24
• UETTDRVC24A
• UETTDRVC04B
• UETTDRVC04A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = noneFor the Statement of Attainment or Transcript:

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC004
  • UETTDRVC25 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

  NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Issue date - If only an issue date is listed, please enter this as the issue date

Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).For the Statement of Attainment or Transcript:

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment.
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC005
  • UETTDRVC26
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

  NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = noneFor the Statement of Attainment or Transcript:

• • Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC009
  • UETTDRVC27
  • UETTDRVC27A
  • UETTDRVC07B
  • UETTDRVC07A
  • No expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification
  NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = noneFor the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

For the Statement of Attainment or Transcript:

•  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC011
• UETTDRVC32
• UETTDRVC32A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none

• •  Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
  • If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
  • Documentation which has been found to be subject to alterations will not be accepted.
  • RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
  • Recognised Training Institution’s name to be displayed on document.
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted Course Titles / Codes:
  • UETDRVC010
  • UETTDRVC34 (Completion date must be prior to 20/09/2022)
  • 12-month expiry
  • Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

   For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

  • Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
  • Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

  NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

  NOTE
  : Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

• The date of completion on the evidence should be recorded as the Issue Date in Pegasus

  Issue date - If only an issue date is listed, please enter this as the issue date

  Expiry date to be recorded as 1 year from date of completion EXCEPT in the instance where a temporary / Interim statement of attainment document is issued (4-week expiry for this documentation).

For the Statement of Attainment or Transcript:

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted Course Titles / Codes:
• UETDRVC007
• UETTDRVC33
• UETTDRVC33A
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

 For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;
• Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = noneFor the Statement of Attainment or Transcript:

• Applicants name to be shown on document
• Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
• Please note; the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
•  RTO Name, Code and Logo
•  Name of Applicant
• Units of competency code and name, date completed
• Date certificate issued
• Authorised person name or title (does not necessarily need a signature)
• Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
• Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
• There is no expiry date on a Statement of Attainment or Transcript.
• **RTO registration must only have been current at the time of training completion / awarding the document
• Document verifier to ensure the Issue of this document is an RTO.
  
  

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence or letters indicating they are for temporary issue until statement of attainment certificate is provided to applicant is acceptable for a period of 4 weeks only from the date of the training being complete which should be indicated on the letter providing it has been issued by an RTO and indicates completion of a nationally recognised unit code

Record the Issue date within Onsite:

• Completion date - if listed on certificate (this completion date is always used when displayed)
• Issue date - If only an issue date is listed please enter this as the issue date

Electrical. Certificate III. Certificate III in Electrotechnology Electrician

• Applicant’s name should be displayed on the evidence and should match the applicant’s name that's registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted.
• If there is a Date of Birth (DOB) data field shown on the uploaded evidence Pegasus will verify the DOB that is listed matches the applicants registered DOB in Pegasus.
• Documentation which has been found to be subject to alterations will not be accepted.
• RTOs must be registered with Australian Skills Quality Authority or their state training authority and must have the relevant qualification and unit of competency on their scope of registration to deliver training and/or assessment
• Recognised Training Institution’s name to be displayed on document.
• Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
• Completion date or issue date must be displayed
• Accepted course code/s: 
  • UEE30820 - Certificate III in Electrotechnology Electrician
  • UEE30811 - Certificate III in Electrotechnology Electrician
  • UEE30807 - Certificate III in Electrotechnology Electrician
  • UTE31199 - Certificate III in Electrotechnology Systems Electrician
• No expiry
• Upon verification, an individual holding an equivalent qualification and/or unit of competency will also meet the qualification and/or unit of competency requirements.

For overseas / international engineering qualifications to be accepted they need to either be recognised under the:

• Washington Accord (http://www.abet.org/global-presence/mutual-recognition-agreements/engineering-washington-accord/is-your-program-recognized/), or http://www.ieagreements.org OR;

Letter from the Australian Institute of Engineers or Engineers Australia recognising your qualification

The date of completion on the evidence should be recorded as the Issue Date in Pegasus

Expiry date = none