Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Image Removed

Image Added


10543
Expand
titleUnit Standards - Electrical


Competency 
Competency Title*Competency Requirements Upload RequirementsExamples

Electrical.Unit Standard.10507 - Use personal protective equipment in an electricity supply environment

Anchor

10507

unit37

10507

unit37

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10507 - Use personal protective equipment in an electricity supply environment
Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
          • For any competency that shows 'unit standard' in the competency title - if the evidence indicates 'VOC' or 'Refresher' it cannot be accepted
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required

Electrical.Unit Standard.10508 - Identify electricity systems used in the electricity supply industry

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:US10508 - Identify electricity systems used in the electricity supply industry
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10509 - Climb and work on electricity network structures

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10509 - Climb and work on electricity network structures
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10543 - Plan, identify & protect underground services during excavation & reinstatement

Anchor
10543

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10543 - Plan, identify & protect underground services during excavation & reinstatement
Applicant’s name should be
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10544 - Install Electrical lines & cables

Anchor
unit38
unit38

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10544 - Install Electrical lines & cables
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10545 - Terminate & joint de-energised LV polymeric insulated power cables

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10545 - Terminate & joint de-energised LV polymeric insulated power cables
Applicant’s name should be displayed
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10546 - Joint LV AC paper insulated power cables

Anchor10546

10546

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10546 - Joint LV AC paper insulated power cables
Applicant’s name should be displayed on the evidence
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10547 - Joint HV polymeric insulated power cables up to 22kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10547 - Joint HV polymeric insulated power cables up to 22kV
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10548 - Joint HV paper insulated power cables up to & including 11kV

Anchor
unit39
unit39

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10548 - Joint HV paper insulated power cables up to & including 11kV
Applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10549 - Load, transport & store electricity supply cables, plant & equip

Anchor10549

10549

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10549 - Load, transport & store electricity supply cables, plant & equip
Applicant’s name should be
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10550 - Joint HV polymeric insulated power cables up to 33kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10550 - Joint HV polymeric insulated power cables up to 33kV
Applicant’s name should be displayed on the evidence and should match the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10551 - Joint HV solid paper insulated multicore power cables from 22kV to 33kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10551 - Joint HV solid paper insulated multicore power cables from 22kV to 33kV
Applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10552 - Joint paper insulated oil pressure multicore power cables from 22kv to 110kV

Anchor

10522

unit40

10522

unit40

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10552 - Joint paper insulated oil pressure multicore power cables from 22kv to 110kV
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.10553 - Joint paper insulated gas pressure multicore power cables from 22kV to 110kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US10553 - Joint paper insulated gas pressure multicore power cables from 22kV to 110kV
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.12295 - Apply & remove earths from conductors

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US12295 - Apply & remove earths from conductors
Applicant’s name should be displayed on the evidence and should match the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.12296 - Apply earths to & remove earths from electrical conductors, plant & equip

Anchor1229612296

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:US12296 - Apply earths to & remove earths from electrical conductors, plant & equip
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.12300 - DKO safety statutes & codes

Anchor
unit41
unit41

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US12300 - DKO safety statutes & codes
Applicant’s name should be displayed on the evidence and should match the applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14271 - Carry out acceptance, commissioning & maintenance tests on power transforming

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14271 - Carry out acceptance, commissioning & maintenance tests on power transforming
Applicant’s name should be
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14272 - Carry out maintenance &/or acceptance test on HV circuit breakers

Anchor14272

14272

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14272 - Carry out maintenance &/or acceptance test on HV circuit breakers
Applicant’s
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14275 - Carry out maintenance &/or commissioning tests on an earthing mat & equip bonding system

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14275 - Carry out maintenance &/or commissioning tests on an earthing mat & equip bonding system
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14276 - Carry out maintenance &/or commissioning test on HV power cables & terminations

Anchor
unit42
unit42

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14276 - Carry out maintenance &/or commissioning test on HV power cables & terminations
Applicant’s
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14283 - Carry out tests on distribution oil filled power transformers of 33kV & below 10 MVA

Anchor1428314283

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14283 - Carry out tests on distribution oil filled power transformers of 33kV & below 10 MVA
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14287 - Use & maintain test instruments HV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14287 - Use & maintain test instruments HV
Applicant’s name should be displayed on the evidence and should match the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14288 - Carry out tests on battery banks & charge systems

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14288 - Carry out tests on battery banks & charge systems
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.14330 - Install substation earthing & bonding system

Anchor

14330

unit43

14330

unit43

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US14330 - Install substation earthing & bonding system
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.17025 - Rescue a victim from an electrical structure

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US17025 - Rescue a victim from an electrical structure
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.17026 - DKO of safe entry into restricted areas on an electricity supply site

Anchor
unit17026
unit17026

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US17026 - DKO of safe entry into restricted areas on an electricity supply site
Applicant’s name should be displayed
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.17027 - Access permits for work on electrical lines, cables & equip

Anchor17027

17027

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US17027 - Access permits for work on electrical lines, cables & equip
Applicant’s name should be
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.17028 - Permits on high voltage electrical equip

Anchor
unit44
unit44

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US17028 - Permits on high voltage electrical equip
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers


Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.17152 - Carry out tree work near electricity supply lines

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US17152 - Carry out tree work near electricity supply lines
Applicant’s name should be displayed on the evidence
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18024 - Install structure mounted electrical equipment

Anchor1802418024

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18024 - Install structure mounted electrical equipment
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18026 - Carry out a rescue from an electricity supply services pit

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18026 - Carry out a rescue from an electricity supply services pit
Applicant’s name should be displayed
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18027 - Draw sketches and interpret electricity supply service plans

Anchor
unit45
unit45

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18027 - Draw sketches and interpret electricity supply service plans
Applicant’s name should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18029 - DKO polarity and phasing in LV and HV electricity network

Anchor18029

18029

The required

evidencce

evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18029 - DKO polarity and phasing in LV and HV electricity network
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18038 - Describe health and safety duties on electricity supply sites

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18038 - Describe health and safety duties on electricity supply sites
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18274 - DKO electricity supply networks

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18274 - DKO electricity supply networks
Applicant’s name should be displayed on the evidence and should match the applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18275 - Major sectors in the New Zealand electricity supply industry

Anchor

18275

unit46

18275

unit46

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18275 - Major sectors in the New Zealand electricity supply industry
Applicant’s name should be displayed
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18276 - Operate light lifting & rigging equipment

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18276 - Operate light lifting & rigging equipment
Applicant’s name should be displayed on the evidence and should match the applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.18278 - Service battery banks

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US18278 - Service battery banks
Applicant’s name should be displayed on the evidence and should match the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.19950 - DKO electrical test instruments and carry out electrical testing

Anchor19950

19950

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US19950 - DKO electrical test instruments and carry out electrical testing
Applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20059 - Terminate LV polymeric insulated power cables

Anchor
unit47
unit47

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20059 - Terminate LV polymeric insulated power cables
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20060 - Terminate LV paper insulated power cables

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20060 - Terminate LV paper insulated power cables
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20061 - Terminate HV polymeric insulated power cables up to 22kV

Anchor2006120061

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20061 - Terminate HV polymeric insulated power cables up to 22kV
Applicant’s name should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20062 - Terminate HV paper insulated power cables up to and including 11kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20062 - Terminate HV paper insulated power cables up to and including 11kV
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20063 - Terminate HV polymeric insulated power cables up to 33kV

Anchor
unit48
unit48

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20063 - Terminate HV polymeric insulated power cables up to 33kV
Applicant’s name should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20064 - Terminate HV solid paper insulated multicore power cables from 22kV to 33kV

Anchor20064

20064

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US 20064 - Terminate HV solid paper insulated multicore power cables from 22kV to 33kV
Applicant’s
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20065 - Terminate paper insulated oil pressure multicore power cables from 22kV to 110kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US 20065 - Terminate paper insulated oil pressure multicore power cables from 22kV to 110kV
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20066 - Terminate paper insulated gas pressure multicore power cables from 22kV to 110kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US 20066 - Terminate paper insulated gas pressure multicore power cables from 22kV to 110kV
Applicant’s name should be
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20067 - Joint HV polymeric insulated multicore power cables from 22kV to 110kV

Anchor

20067

unit49

20067

unit49


The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20067 - Joint HV polymeric insulated multicore power cables from 22kV to 110kV
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20068 - Terminate HV polymeric insulated multicore power cables from 22kV to 110kV

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US 20065 - Terminate paper insulated oil pressure multicore power cables from 22kV to 110kV
Applicant’s name should be displayed on the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20069 - Joint live LV paper insulated power cables

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20069 - Joint live LV paper insulated power cables
Applicant’s name should be displayed on the evidence and should match the applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20070 - Terminate live LV paper insulated power cables

Anchor20070

20070

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20070 - Terminate live LV paper insulated power cables
Applicant’s name should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20071 - Joint live LV polymeric insulated power cables

Anchor
unit50
unit50

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US 20071 - Joint live LV polymeric insulated power cables
Applicant’s name should be displayed on the evidence
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20072 - Terminate live LV polymeric insulated power cables

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20072 - Terminate live LV polymeric insulated power cables
Applicant’s name should be displayed on the evidence and should match the
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20073 - DKO the installation of power cables

Anchor20073

20073

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20073 - DKO the installation of power cables
Applicant’s name should be displayed
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20092 - DKO plant and equipment

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20092 - DKO plant and equipment
Applicant’s name should be displayed on the evidence and should match the applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20190 - Conduct introductory insulation resistance testing

Anchor
unit51
unit51

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20190 - Conduct introductory insulation resistance testing
Applicant’s name should be
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.20535 - Joint HV paper insulated cable to polymeric insulated cable up to 22kV using a transition jo

Anchor20535

20535

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US20535 - Joint HV paper insulated cable to polymeric insulated cable up to 22kV using a transition jo
Applicant’s
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.23898 - Describe and carry out polarity and phasing tests on LV
  • The required evidence will be

a
  • either:

    • NZQA Record of Achievement showing completion of the
following
    • unit standard
:
  • US23898 - Describe and carry out polarity and phasing tests on LV
Applicant’s name should be displayed on the evidence and should match the applicant’s name
    • which is listed in the competency title*

    OR 

    • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
            • Must state "unit standard achieved"
            • 'Unit standards aligned' is not acceptable 
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy
      • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.23898 & 23899 Polarity & Phasing

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
options:US 23898 - Describe and carry out polarity and phasing tests on LV & US23899 - Describe and carry out phasing tests on HV electricity networks
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.23899 - Describe and carry out phasing tests on HV electricity networks

Anchor
unit52
unit52

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US23899 - Describe and carry out phasing tests on HV electricity networks
Applicant’s name
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.26019 - DKO introductory concepts in power system protection

Anchor26019

26019

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:
  • US26019 - DKO introductory concepts in power system protection
Applicant’s name should be displayed on the evidence and should
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.26019 & 26020 or 29736

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:US26019 - DKO introductory concepts in power system protection &  US26020 - DKO intermediate concepts in power system protection
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must
be clear and legibleCan be in colour copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.26020 - DKO intermediate concepts in power system protection

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:US26020 - DKO intermediate concepts in power system protection
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour
copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.26705 - Carry out tree work in the insulated tool zone around power lines

Anchor
unit53
unit53

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:US26705 - Carry out tree work in the insulated tool zone around power lines
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy
OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28020 - DKO safe working electrical practices for Electricity Supply Workers

Anchor2802028020

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of
the following unit standard:US28020 - DKO safe working electrical practices for Electricity Supply Workers
  • the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in
colour copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28112 - Operate and store machinery, plant, and equipment in an electricity network environment

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following
  • unit standard
:US28112 - Operate and store machinery, plant, and equipment in an electricity network environment
  • which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
Can be in colour copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28113 - Install pad and structure mounted electrical equipment

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following unit standard:US28113 - Install pad and structure mounted electrical equipment
  • unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour
copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28194 - Describe polarity & phasing tests on electricity supply networks

Anchor

28194

unit54

28194

unit54

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of
the following unit standard:US 28194 - Describe polarity & phasing tests on electricity supply networks
  • the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
Can be in colour copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28277 - DKO power cable construction

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following unit standard:US 28277 - DKO power cable construction
  • unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy
OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28277 & 28280 Power Cable

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of
the following unit standard:US 28277 - DKO power cable construction & US 28280 - DKO underground power cable installation requirements
  • the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
Can be in colour copy OR black and white copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28280 - DKO underground power cable installation requirements

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of the
following unit standard:US 28280 - DKO underground power cable installation requirements
  • unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white
copy

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required


Electrical.Unit Standard.28895 - Maintain substation earthing and bonding

Anchor2889528895

The required evidence will be

a

either:

  • NZQA Record of Achievement showing completion of
the following unit standard:US 28895 - Maintain substation earthing and bonding
  • the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy
    • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date


Expiry Date = Not Required

Electrical

Electronics Communication.Unit Standard.
6401 6402 10507 10508 18038 20092 17026
30523 DKO telco optical fibre network infrastructure
  • The required evidence will be
a
  • either:
    • NZQA Record of Achievement showing completion of
the following unit standard:US 28895 - Maintain substation earthing and bonding
    • the unit standard which is listed in the competency title*

OR 

    • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
            • Must state "unit standard achieved"
            • 'Unit standards aligned' is not acceptable 
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy
      • Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Avetta verifiers click here for additional business rule information prior to verification of this competency


Issue Date = Credit Result date

 

Expiry Date = Not Required