Page Comparison

Image RemovedImage Added

Expand

title	AS Course Certificates

Anchor

	AScoursecerts
	AScoursecerts

Competency

Competency Requirements

Upload Requirements

Examples

Welder Certificate AS 1796-2001 - No 1

Anchor

	wedlercertasno1
	wedlercertasno1

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 600 mm outside diameter (single vee welded from both sides).
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Anchor

	weldercertasno1e
	weldercertasno1e

Welder Certificate AS 1796-2001 - No 1E

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 270 mm outside diameter (single vee welded from one side only).
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Modified

Welder Certificate AS 1796-2001 - No 2

Anchor

	weldercertasno2
	weldercertasno2

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only).
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Added

Welder Certificate AS 1796-2001 - No 3

Anchor

	weldercertasno3
	weldercertasno3

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Manual metal-arc welding (MMAW) of welds in

carbon

alloy steel pipe (single vee weld from

one side only

both sides).
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Added

Welder Certificate AS 1796-2001 - No 3E

Anchor

	weldercertasno3e
	weldercertasno3e

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Manual metal-arc welding (MMAW) of welds using hydrogen controlled electrodes in alloy steel plate and alloy steel pipe over 270 mm outside diameter (single vee weld from one side only)
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder Certificate AS 1796-2001 - No 4

Anchor

	weldercertasno4
	weldercertasno4

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Manual metal-arc welding (MMAW) of weld using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Modified

Welder Certificate AS 1796-2001 - No 5

Anchor

	weldercertasno5
	weldercertasno5

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Gas tungsten-arc welding (GTAW) root run and manual metal-arc welding (MMAW) of welds using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Modified

Welder Certificate AS 1796-2001 - No 6

Anchor

	weldercertasno6
	weldercertasno6

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Gas welding (GW)

(

single vee welded from one side only

)

If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder Certificate AS 1796-2001 - No 7

Anchor

	weldercertasno7
	weldercertasno7

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Gas tungsten - arc welding (GTAW)

(

single vee welded from one side only

)

If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Modified

Welder Certificate AS 1796-2001 - No 8F

Anchor

	weldercertasno8f
	weldercertasno8f

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Flux cored arc welding (FCAW) of plate and pipe
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate. AS 1796-2001 - No 8G

Anchor

	weldercertasno8g
	weldercertasno8g

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Gas metal - arc welding (GMAW) of plate and pipe
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder.Certificate. AS 1796-2001 - No 9

Anchor

	weldercertasno9
	weldercertasno9

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Automatic Welding
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Welder Certificate AS 1796-2001 - No 10

Anchor

	weldercertasno10
	weldercertasno10

Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
A certificate or card can be accepted
Must show completion of Welding Supervisor
If card is uploaded, both sides of card should be displayed in uploaded file
Evidence must be issued by a registered training organisation (RTO)
There must be an indication of the number that the applicant was certified in
Black and white or colour copy can be accepted

Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Expand

title	Trade Certificates

Anchor

	weldingtradecerts
	weldingtradecerts

Competency

Competency Requirements

Upload Requirements

Examples

Fabrication Metal & Welding.Certificate III.Boilermaking

Anchor

	CertIIIBoilermaking
	CertIIIBoilermaking

Applicants name to be displayed on uploaded evidence and to match applicants registered name
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer to be shown
Document / Certificate / Number to be shown
Completion date or issue date must be displayed
No expiry

Accepted Types

Cert III
Certificate of Proficiency
Certificate of Completion of Apprenticeship

Not Accepted

Craft Certificate - needs to be uploaded with SOC

The date of completion on the evidence should be recorded as the Issue Date in Onsite

Image Modified

Mechanical.Certificate.Certificate of Proficiency Boilermaker

Anchor

	CertProfBoillermaker
	CertProfBoillermaker

Applicants name to be displayed on uploaded evidence and to match applicants registered name

Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer to be shown
Document / Certificate / Number to be shown
Completion date or issue date must be displayed
No expiry

Accepted Types

Cert III
Certificate of Proficiency
Certificate of Completion of Apprenticeship

Not Accepted

Craft Certificate - needs to be uploaded with SOC

The date of completion on the evidence should be recorded as the Issue Date in Onsite

Fabrication Metal & Welding.Certificate III.Engineering - Fabrication Trade

Anchor

	CertIIIFabricationtrade
	CertIIIFabricationtrade

Applicants name to be displayed on uploaded evidence and to match applicants registered name
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer to be shown
Document / Certificate / Number to be shown
Completion date or issue date must be displayed
No expiry

Accepted Types

Cert III
Certificate of Proficiency
Certificate of Completion of Apprenticeship

Not Accepted

Craft Certificate - needs to be uploaded with SOC

The date of completion on the evidence should be recorded as the Issue Date in Onsite

Image Modified

Fabrication Metal & Welding.Certificate III.Welder

Anchor

	CertIIIWelder
	CertIIIWelder

Applicants name to be displayed on uploaded evidence and to match applicants registered name
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer to be shown
Document / Certificate / Number to be shown
Completion date or issue date must be displayed
No expiry

Accepted Types

Cert III
Certificate of Proficiency
Certificate of Completion of Apprenticeship

Not Accepted

Craft Certificate - needs to be uploaded with SOC

The date of completion on the evidence should be recorded as the Issue Date in Onsite

Image Modified

Image Added

Fabrication Metal & Welding.Trade.Qualifications - Other

Anchor

	TradeOther
	TradeOther

Applicants name to be displayed on uploaded evidence and to match applicants registered name
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer to be shown
Document / Certificate / Number to be shown
Completion date or issue date must be displayed
No expiry

Accepted Types

Cert III
Certificate of Proficiency
Certificate of Completion of Apprenticeship

Not Accepted

Craft Certificate - needs to be uploaded with SOC

The date of completion on the evidence should be recorded as the Issue Date in Onsite

Mechanical.Certificate.Certificate of Proficiency Welding

Anchor

	CertProfWelding
	CertProfWelding

Applicants name to be displayed on uploaded evidence and to match applicants registered name
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Name and / or signature of issuer to be shown
Document / Certificate / Number to be shown
Completion date or issue date must be displayed
No expiry

Accepted Types

Cert III
Certificate of Proficiency
Certificate of Completion of Apprenticeship

Not Accepted

Craft Certificate - needs to be uploaded with SOC

The date of completion on the evidence should be recorded as the Issue Date in Onsite

If you have been asked to provide a Statement of Competency please click here for the template and business rules

Versions Compared

Old Version 21

New Version Current

Key