Page Comparison

Image Removed

Expand

title	Certificates

Anchorcertificatescertificates

Competency Name

Competency Requirements

Upload Requirements

Certificate.Certificate III.UET20421 - Transmission Structure and Line Assembly

Applicants name to be shown on documentation

Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Qualification code and name, date completed

Date certificate issued

Image Added

Electrical.Certificate III.UEE30811 - Electrotechnology Electrician

Expand

title	Certificates

Anchor

	certificates
	certificates

Competency Name

Competency Requirements

Upload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
Screenshots from websites are not accepted - Must be copy of the Licence
Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
Date of receipt to be displayed on the invoice
Contractor number to be displayed on document
Must be issued by relevant state government authority
Black and white or coloured copy of evidence can be accepted

Avetta verifiers click here for additional business rule information prior to verification of this competency

When Licence is uploaded:

Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Certificate III.Engineering - Electrical/Electronic Trade

Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
A qualification issued by a Register Training Organisation (RTO)
The qualification must be a Certificate III.
The qualification must show: MEM30205 Certificate III in Engineering - Mechanical

Issue Date = Date of completion shown on certificate
No expiry date is required

Electrical.Certificate III.Engineering - Industrial Electrician

Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
A qualification issued by a Register Training Organisation (RTO)
The qualification must be a Certificate III

Issue Date = Date of completion shown on certificate
No expiry date is required

Electrical.Certificate III.Certificate III in Electrotechnology Electrician

Applicants name to be shown on documentation
Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Accepted course codes:

UEE30811
UTE31199

Document / Certificate / Number
No expiry

Note: Evidence of Qualification.Licence.Electrical orQualification.Certificate.Qualified Supervisor Certificate - Electrical Work is accepted as evidence. To be awarded either licence required the applicant to provide evidence of current or equivalent qualification to NSW Fair Trading.

Record the Issue date within Onsite:
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date

Certificate II in ESI -Asset Inspection and Testing

Anchor

	AssetInspection
	AssetInspection

Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
A qualification issued by a Register Training Organisation (RTO)
The qualification must be a Certificate II
The qualification must show: Certificate II in ESI – Asset Inspection and Testing or be listed as a superseded certificate as per https://training.gov.au/Training/Details/UET20621

Issue Date = Date of completion shown on certificate

Qualification.Certificate III.Light Vehicle Mechanical Technology

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Qualification code and name. Acceptable codes and names are:

AUR30620 (or older) – Certificate III in Light Vehicle Mechanical Technology
AUR31520 (or older)– Certificate III in Automotive Diesel Engine Technology
AUR30320 (or older)– Certificate III in Automotive Electrical Technology
AUR32518 (or older) – Certificate III in Automotive Underbody Technology
AUR31420 (or older) – Certificate III in Automotive Diesel Fuel Technology
AUR32721 – Certificate III in Automotive Electric Vehicle Technology
AUR31316 (or older) – Certificate III in Automotive Engine Reconditioning
AUR31220 (or older) – Certificate III in Mobile Plant technology
AUR30720 (or older) Certificate III in Motor Sport Technology
AUR30405 (or older)– Certificate III in Automotive Mechanical Technology (Light Vehicle)
MSM31022 (or older) – Certificate III in Recreational Vehicle Service and repair

NOTE: Qualification code that is shown in competency naming convention must be shown on evidence Or any previous superseded equivalent qualification codes (which are indicated by changes in the last two numbers which relate to the Training Package update year eg. AUR30405 means it is the 2005 update version), shown against the mapping of this course on training.gov.au

Date of completion or issue date must be shown
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click

HERE for Overseas qualifications are

HERE for Internal Process on checking RTO’s

Actual copy of certificate is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Document / Certificate / Number
No expiry

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite

:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Qualification.Certificate III.ESI - Power Systems - Distribution Overhead

Applicants name to be shown on documentation
Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Qualification code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo

**RTO registration must only have been current at the time of training completion / awarding the document

Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Actual copy of certificate is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Document / Certificate / Number
No expiry

Overseas qualifications are not accepted

Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is not required

Expand

title	Licence

Competency Name

Competency Requirements

Upload Requirements

Qualification.Licence.Electrical

Name on Electrical Licence to match the person registered

Accepted form/s of evidence:

Electrical contractor licence
Supervisor certificate licence showing 'Q' can be accepted
New Zealand Electrical licence listing 'Inspector'
New Zealand practicing licence listing 'Electrician'
Screen shot showing that the licence is current for an interim period of 4 weeks and then the licence needs to be supplied

Must be issued by nominated / relevant government department based on state of issue and reflect the corresponding logo

Avetta verifiers click here for additional business rule information prior to verification of this competency

Expiry date to be recorded as shown on licence

Image Added

Applicants name to be shown on documentation
Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
Recognised Training Institution name to be displayed on document
Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Document / Certificate / Number
No expiry

For overseas / international qualifications: These will be escalated from Pegasus to the client for review and case by case approval

Expand

title	Statement of Attainment

Expand

title	Statement of Attainment

Competency Name	Competency Requirements	Upload Requirements
Electrical.Statement of Attainment.- Perform Pole Top Rescue	Applicants name to be shown on

documentation

document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for

Christopher can be accepted

'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Qualification

Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Accepted Unit[s] of competency code and name:

UETDRMP006 - Perform pole top rescue
UETDRRF003 - Perform pole top rescue
UETTDRRF02 - Perform pole top rescue
UETTDRRF02B - Perform pole top rescue
UETTDRRF02A - Perform pole top rescue

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Actual copy of certificate is required. Letters are not

NOTE: Cards are accepted in lieu

of this.

Completion date or issue date must be displayed

Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite

Document / Certificate / Number

No expiry

Overseas qualifications are

of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this

completion

date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date

Qualification - Certificate III in ESI - Power Systems - Transmission Overhead

is 1 year from date of training completion

Electrical.Statement of Attainment - Perform EWP rescue

Applicants name to be shown on

documentation

document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for

Christopher can be accepted

'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be

approved:

RTO Name, Code and Logo
Qualification code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo

**RTO registration must only have been current at the time of training completion / awarding the document

Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Actual copy of certificate is required. Letters are not accepted in lieu of this.
Completion date or issue date must be displayed
Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
Document / Certificate / Number
No expiry

Overseas qualifications are not accepted

Record the Issue date within Onsite:

Completion date - if listed on certificate (this completion date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Qualification - Electrical

approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Accepted Unit[s] of competency code and name:

UETDRRF002 - Perform EWP rescue
UETDRMP005 - Perform elevated work platform rescue
UETTDRRF03 - Perform EWP rescue

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this

completion

date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the

issue dateAdvanced Diploma of ESI - Power SystemsAdvanced Diploma of ESI - Power Systems or
Certificate of Technology - Electrical or
Certificate of Competency (SECPotential equivalents or overseas qualifications are to be verified by the Network Operator you are undertaking work for and may not be accepted on all Networks.

Certificate IV in ESI - Power Systems Substations UET40512

Certificate IV Qualification and Statement/Transcript/Records of results

Expand

title	Licence

Competency NameCompetency RequirementsUpload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
Screenshots from websites are not accepted - Must be copy of the Licence
Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

Applicants name to be displayed on uploaded evidence and to match applicants registered name
‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
Date of receipt to be displayed on the invoice
Contractor number to be displayed on document
Must be issued by relevant state government authority
Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue all other necessary information relating to applicant details and RTO detailsNOTE: Temporary / Interim statement of attainment evidence is not acceptedfirstAidInESIEnviro

Competency Name

Competency Requirements

Upload Requirements

issue date

Expiry date is 1 year from date of training completion

Electrical.Statement of Attainment.- Perform tower rescue

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

UETDRMP009 - Perform tower rescue
UETDRRF006 - Perform tower rescue
UETTDRRF04 - Perform tower rescue
UETTDRRF04B - Perform tower rescue
UETTDRRF04A - Perform tower rescue

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year from date of training completion

Electrical.Statement of Attainment.- Perform Rescue from Switchyard Structures

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as

all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Accepted Unit[s] of competency code and name:

UETDRMP008 - Perform rescue from switchyard structures
UETDRRF005 - Perform rescue from switchyard structures at heights
UETTDRRF05 - Perform rescue from switchyard structures at heights
UETTDRRF05B - Perform rescue from switchyard structures at heights
UETTDRRF05A - Perform rescue from switchyard structures at heights

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year from date of training completion

Electrical.Statement of Attainment.UETTDRRF03 -

Perform EWP rescue from a live LV panel

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

- RTO Name, Code and Logo

- Units of competency code and name, date completed

-Date certificate issued

-Authorised person name or title (does not necessarily need a signature)

-Issuing organisation’s logo / corporate identifier / unique watermark and /

or

or document or certificate number

-Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only

- Not Card)

·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

· Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Applicants name to be shown on document

Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)

Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo

Units

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year from date of training completion

Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue

this as the issue date

· Expiry date is 13 months from date of training completion

Accepted Unit[s] of competency code and name

, date completed

Date certificate issued

Authorised person name or title (does not necessarily need a signature)

Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

:

UETDRMP007 - Perform rescue from a live low voltage panel
UETDRRF004 - Perform rescue from a live LV panel
UETTDRRF06 - Perform rescue from a live LV panel
UETTDRRF06B - Perform rescue from a live LV panel
UETTDRRF06A - Perform rescue from a live LV panel

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’sNOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year 13 months from date of training completion

Image Added

Electrical.Statement of Attainment.UETTDRRF05 UETTDRRF07 - Perform Rescue from Switchyard Structures at Heightscable pit/trench/excavation rescue

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year from date of training completion

Electrical.Statement of Attainment

Perform rescue from a live LV panel

.- Perform EWP controlled descent escape

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

-

RTO Name, Code and Logo

-

Units of competency code and name, date completed

-

Date certificate issued

-

Authorised person name or title (does not necessarily need a signature)

-

Issuing organisation’s logo / corporate identifier / unique watermark and /

or

or document or certificate number

-

Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only -

Not Card)

·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details

**RTO registration must only have been current at the time of training completion / awarding the document/ awarding the document

Accepted Unit[s] of competency code and name:

UETTDRRF08 - Perform EWP controlled descent escape
UETDRMP004 - Perform elevated work platform controlled descent escape
UETTDRRF08B - Perform EWP controlled descent escape
UETTDRRF08A - Perform EWP controlled descent escape

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

· Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

· Expiry date is 13 months from date of training completion

Accepted UOC:

· UETTDRRF06,; or

· UETDRRF004

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s/ Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 13 months 1 year from date of training completion

Image Removed

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescueUETTDREL13 - Comply with environmental and incidental response procedures

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Accepted course codes:

UETTDREL13 - Comply with environmental and incidental response procedures
UETDREL002 - Comply with environmental requirements

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year from date of training completionnot required

Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escapeUETTDREL14 - Working safely near live electrical apparatus as a non electrical worker

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.RTO.

Accepted course codes:

UETTDREL14
UETDREL006

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence is not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date is 1 year from date of training completionnot required

Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response proceduresWork safely in the vicinity of live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

UETDREL005 - Work safely in the vicinity of live electrical apparatus
UETTDREL16 - Working safely near live electrical apparatus

UETTDREL16A - Working safely near live electrical apparatus

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDREL14 - Working safely UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus as a non electrical worker

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDREL16 - Working safely near live UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatusUETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect ESI safety rules for work on, near or in the vicinity of electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.verifier to ensure the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus
UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
UETTDRRF01B - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
UETTDRRF01A - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industryUETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Anchor

	firstAidInESIEnviro
	firstAidInESIEnviro

Electrical.Statement of Attainment

.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

- First Aid in an ESI Environment

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence

not accepted

NOTE: The following unit codes are accepted:

UETTDRRF10 - Provide first aid in an ESI environment
UETDRRF007 - Provide first aid in an ESI environment
UETDRMP010 - Provide first aid in an ESI environment

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of AttainmentCertificate.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructureUETTDRRF11 - Testing of connections to low voltage electricity networks

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Anchor

firstAidInESIEnviro

Electrical.Statement of Attainment.

UETTDRRF10 - First Aid in an ESI Environment

UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatusUETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation UETTDRVC26 – Cut vegetation at ground near live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical apparatusappara

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparaapparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC34A AHCARB204A - Undertake release and rescue from a tree near live electrical apparatusstandard climbing techniques

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted.

NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniquesAHCPCM201A - Recognise plants

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted.NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.AHCPCM201A - Recognise plantsTLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)Apply work health and safety regulations, codes and practices in the workplace

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO..

Accepted Unit[s] of competency code and name:

UEECD0007 - Apply work health and safety regulations, codes and practices in the workplace
UEENEEE001B - Apply OHS practices in the workplace
UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UEENEE101A - Apply OHS regulations, codes and practices in the workplaceUUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and proceduresUETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical workerAHCARB205A - Operate and maintain chainsaws

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsawsUETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatusUETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of AttainmentCertificate.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environmentUETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove)

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Certificate.UETTDRDP14A UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (glovestick)

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.CertificateStatement of Attainment.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick)UETTDRRF07 - Perform cable pit/trench/excavation rescue

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not required

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

Applicants name to be shown on document
Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

RTO Name, Code and Logo
Units of competency code and name, date completed
Date certificate issued
Authorised person name or title (does not necessarily need a signature)
Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry date not requiredrequired

Transgrid approved evidence training

Competency must be escalated externally to Transgrid to review/approve under all
circumstances

Issue Date = Determined by Transgrid
Expiry Date = Determined by Transgrid

Electrical.Certificate.III or IV in Electronics and Communications

Name on Degree to match the person registered
Bachelor Degree in Electrical Engineering to be listed
No expiry
Black and white or colour is acceptable

Issue date to be recorded

Electrical.Diploma.or Degree Electrical Engineering

Name on Degree to match the person registered
Bachelor Degree in Electrical Engineering to be listed
No expiry
Black and white or colour is acceptable

Issue date to be recorded

Image Added

Electrical.Certificate.III or IV in Telecommunications Technology

Name on certificate must match name in system
Certificate of proficiency in Electrical qualification to be listed
No expiry
Must be legible

Issue date to be recorded

Versions Compared

Old Version 23

New Version Current

Key