Page Comparison

• Name on qualification to match the person registered
• Accepted Documentation Types:
  
  • 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
• Accepted Course Titles include:
  • Fitter and Turner
• Black and white or colour acceptable
• Must be clearly scanned and legible

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Accepted Documentation Types:
  
  • 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
• Accepted Course Titles include:
  • Fitter Machinist
• Black and white or colour acceptable
• Must be clearly scanned and legible

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Accepted Documentation Types:
  
  • 'Certificate of Proficiency

• • ' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
• Accepted Course Titles include:
  • • Engineering Fabrication
    • Engineering - Fabrication Trade
• Black and white or colour acceptable
• Must be clearly scanned and legible

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

Engineering.Statement of Attainment.Partial Completion of Cert II in Engineering.

• Name on qualification to match the person registered
• Statement of Attainment to be issued by a Registered Training Organisation(RTO)
• Accepted Documentation Type: 

Pirtek Statement of Attainment can be accepted

Engineering.Statement of Attainment

• Black and White or colour acceptable
• Must be clearly scanned and legible-PDF copy 

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on certificate to match the person registered
• Accepted Documentation Types:

• • • 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
    • Australian Recognised Trade Certificate in the relevant course to be listed
• Accepted Course Titles include:
  • • Boilermaker
    • Structural Steel Tradesperson

• Black and white or colour is acceptable

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

Mechanical.Qualified.Medium Vehicle Mechanic

Acceptable Certificates;

• Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial)

OR

• COP - Automotive (Heavy Vehicle Mechanical)(Road Transport) - Medium Vehicle Mechanic

• Name on qualification to match the person registered
• Completion date or issue date must be displayed
• Course listed on certificate must match competency name exactly and be a certificate of proficiency 

Note - this business rule is for the Medium Vehicle Mechanic role only - Pegasus to view the submitted role prior to approval 

From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Must state Engineering (High Pressure Hose Assemblies) or equivalent
• Black and white or colour acceptable
• Must be clearly scanned and legible

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Must state Engineering (Mechanical) or equivalent
• Black and white or colour acceptable
• Must be clearly scanned and legible

From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. 

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on certificate to match the person reregistered
• Statement of Attainment to be issued by a Registered Training Organisation(RTO)
• Black and White or colour acceptable
• Must be clearly scanned and legible-PDF copy 
• Accepted Documentation Type:

Pirtek Certificate of Completion

Engineering Statement of Attainment

• Issue date to be recorded
• No expiry date

Heavy Vehicle Mechanic (Mobile Plant) - Shared Zone Qualifications 

Acceptable Certificates;

• Certificate of Proficiency - Automotive Mobile Plant  Technology

OR     

• Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial)

OR                                              

• Certificate of Proficiency - Automotive Mechanical Technology 

OR     

• Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Road Transport)

• Name on qualification to match the person registered
• Completion date or issue date must be displayed
• Course listed on certificate must match competency name exactly
• 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)

*THIESS APPROVAL REQUIRED FOR “Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)”  

Certificate must be uploaded with the transcript. The transcript must list ALL 3 modules listed below and must be uploaded with approval email from

mtarthursouthinductions@thiess.com.au

It is the company’s responsibility to seek the approval prior to the uploading of the documents. If approval is not uploaded for the Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport) + transcripts, the file document will be rejected.  

1. Service hydraulic systems
2. Inspect service and repair tracked type drive and support systems
3. Diagnose and repair mobile plant braking systems

Note - this business rule is for the Heavy Vehicle Mechanic (Mobile Plant) - Shared Zone role - Pegasus to view the submitted role prior to approval 

From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

Heavy Vehicle Mechanic (Mobile Plant) -

Thiess Area Only 

Acceptable Certificates;

• Certificate of Proficiency - Plant Mechanic

OR

• Certificate of Proficiency - Heavy Vehicle

OR                                                                           

Certificate of Proficiency - Diesel Fitter

OR

• Certificate of Proficiency - Automotive Mobile Plant Technology

OR

• Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial)

OR

• Certificate of Proficiency - Automotive Mechanical Technology

OR

• Certificate of Proficiency in Agricultural Mechanical Technology (Plant)

OR

• Certificate of Proficiency - Certificate IV in Engineering (Plant)

OR

• Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)

• Name on qualification to match the person registered
• Completion date or issue date must be displayed
• Course

• listed on certificate must match competency name exactly
• 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)

*THIESS APPROVAL REQUIRED FOR “Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)”  

Certificate must be uploaded with the transcript. The transcript must list ALL 3 modules listed below and must be uploaded with approval email from

mtarthursouthinductions@thiess.com.au 

It is the company’s responsibility to seek the approval prior to the uploading of the documents. If approval is not uploaded for the Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport) + transcripts, the file document will be rejected.  

1. Service hydraulic systems
2. Inspect service and repair tracked type drive and support systems
3. Diagnose and repair mobile plant braking systems

Note - this business rule is for the Heavy Vehicle Mechanic (Mobile Plant) - Thiess Area Only role - Pegasus to view the submitted role prior to approval 

From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. 

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Must state Mechanical Engineering or equivalent
• Black and white or colour acceptable
• Must be clearly scanned and legible

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Accepted Documentation Types:
  
  • 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
• Accepted Course Titles include:
  • Automotive (Light Vehicle - Mechanical)
• Black and white or colour acceptable
• Must be clearly scanned and legible
• From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. 

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered

• Accepted Documentation Types:
  
  • 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
• Accepted Course Titles include:
  • Light Vehicle
• Black and white or colour acceptable
• Must be clearly scanned and legible
• From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. 

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered

• Accepted Documentation Types:
  
  • 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc)
• Accepted Course Titles include:
  • Motor Mechanic
• Black and white or colour acceptable
• Must be clearly scanned and legible
• From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. 

If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered