Versions Compared

Old Version 28

changes.mady.by.user Grace Chisholm (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Marivic.Sumagaysay (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Image Removed

Expand
titleCertificates
Anchorcertificatescertificates Expand
titleLicence
Competency NameCompetency RequirementsUpload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Qualification.Licence.Electrical

Name on Electrical Licence to match the person registered

Accepted form/s of evidence:

  • Electrical contractor licence
  • Supervisor certificate licence showing 'Q' can be accepted
  • New Zealand Electrical licence listing 'Inspector'
  • New Zealand practicing licence listing 'Electrician'
  • Screen shot showing that the licence is current for an interim period of 4 weeks and then the licence needs to be supplied

Must be issued by nominated / relevant government department based on state of issue and reflect the corresponding logo

  • Expiry date to be recorded as shown on licence

Image Removed

Expand
titleStatement of Attainment

Competency Name

Competency Requirements

Upload Requirements

Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue

Image Added


Expand
titleCertificates

Anchor
certificates
certificates

Competency NameCompetency RequirementsUpload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted

Avetta verifiers click here for additional business rule information prior to verification of this competency

When Licence is uploaded:

  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion


Electrical.Certificate III.Engineering - Electrical/Electronic Trade

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
  • The qualification must be a Certificate III.
  • The qualification must show: MEM30205 Certificate III in Engineering - Mechanical


  • Issue Date = Date of completion shown on certificate

  • No expiry date is required




Electrical.Certificate III.Engineering - Industrial Electrician

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
  • The qualification must be a Certificate III

  • Issue Date = Date of completion shown on certificate

  • No expiry date is required




Electrical.Certificate III.Certificate III in Electrotechnology Electrician
  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Completion date or issue date must be displayed
  • Accepted course codes:
    • UEE30811
    • UTE31199
  • Document / Certificate / Number
  • No expiry
Note: Evidence of Qualification.Licence.Electrical  orQualification.Certificate.Qualified Supervisor Certificate - Electrical Work is accepted as evidence. To be awarded either licence required the applicant to provide evidence of current or equivalent qualification to NSW Fair Trading.
  • Record the Issue date within Onsite:
    • Completion date - if listed on certificate (this completion date is always used when displayed)
    • Issue date - If only an issue date is listed please enter this as the issue date

Certificate II in ESI -Asset Inspection and Testing

Anchor
AssetInspection
AssetInspection
 

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
  • The qualification must be a Certificate II
  • The qualification must show: Certificate II in ESI – Asset Inspection and Testing or be listed as a superseded certificate as per https://training.gov.au/Training/Details/UET20621
  • Issue Date = Date of completion shown on certificate

Qualification.Certificate III.Light Vehicle Mechanical Technology
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Qualification code and name. Acceptable codes and names are:
      • AUR30620 (or older) – Certificate III in Light Vehicle Mechanical Technology
      • AUR31520 (or older)– Certificate III in Automotive Diesel Engine Technology
      • AUR30320 (or older)– Certificate III in Automotive Electrical Technology
      • AUR32518 (or older) – Certificate III in Automotive Underbody Technology
      • AUR31420 (or older) – Certificate III in Automotive Diesel Fuel Technology
      • AUR32721 – Certificate III in Automotive Electric Vehicle Technology
      • AUR31316 (or older) – Certificate III in Automotive Engine Reconditioning
      • AUR31220 (or older) – Certificate III in Mobile Plant technology
      • AUR30720 (or older) Certificate III in Motor Sport Technology
      • AUR30405 (or older)– Certificate III in Automotive Mechanical Technology (Light Vehicle)
      • MSM31022 (or older) – Certificate III in Recreational Vehicle Service and repair

NOTE: Qualification code that is shown in competency naming convention must be shown on evidence  Or any previous superseded equivalent qualification codes (which are indicated by changes in the last two numbers which relate to the Training Package update year eg. AUR30405 means it is the 2005 update version), shown against the mapping of this course on training.gov.au

    • Date of completion or issue date must be shown
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

Click HERE for Internal Process on acceptance of superseded unit of competency

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is not required




Expand
titleLicence


Competency NameCompetency RequirementsUpload Requirements

Qualification.Licence.Electrical

Name on Electrical Licence to match the person registered

Accepted form/s of evidence:

  • Electrical contractor licence
  • Supervisor certificate licence showing 'Q' can be accepted
  • New Zealand Electrical licence listing 'Inspector'
  • New Zealand practicing licence listing 'Electrician'
  • Screen shot showing that the licence is current for an interim period of 4 weeks and then the licence needs to be supplied

Must be issued by nominated / relevant government department based on state of issue and reflect the corresponding logo

Avetta verifiers click here for additional business rule information prior to verification of this competency

  • Expiry date to be recorded as shown on licence

Image Added







Expand
titleStatement of Attainment


documentfirstAidInESIEnviro

  • Expiry date not required


Transgrid approved evidence training 

Competency Name

Competency Requirements

Upload Requirements


Electrical.Statement of Attainment.- Perform Pole Top Rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Accepted Unit[s] of competency code and name:

  • UETDRMP006 - Perform pole top rescue
  • UETDRRF003 - Perform pole top rescue
  • UETTDRRF02 - Perform pole top rescue
  • UETTDRRF02B - Perform pole top rescue
  • UETTDRRF02A - Perform pole top rescue

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment - Perform EWP rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the

document

Accepted Unit[s] of competency code and name:

  • UETDRRF002 - Perform EWP rescue
  • UETDRMP005 - Perform elevated work platform rescue
  • UETTDRRF03 - Perform EWP rescue

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP tower rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

  • UETDRMP009 - Perform tower rescue
  • UETDRRF006 - Perform tower rescue
  • UETTDRRF04 - Perform tower rescue
  • UETTDRRF04B - Perform tower rescue
  • UETTDRRF04A - Perform tower rescue

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescueRescue from Switchyard Structures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not acceptedInterim statement of attainment evidence is not accepted


Accepted Unit[s] of competency code and name:

  • UETDRMP008 - Perform rescue from switchyard structures
  • UETDRRF005 - Perform rescue from switchyard structures at heights
  • UETTDRRF05 - Perform rescue from switchyard structures at heights
  • UETTDRRF05B - Perform rescue from switchyard structures at heights
  • UETTDRRF05A - Perform rescue from switchyard structures at heights
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF05 -

Perform Rescue from Switchyard Structures at Heightsrescue from a live LV panel

  •   Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  •   Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

        - RTO Name, Code and Logo

        - Units of competency code and name, date completed

        -Date certificate issued

        -Authorised person name or title (does not necessarily need a signature)

        -Issuing organisation’s logo / corporate identifier / unique watermark and /

or

or                  document or certificate number

        -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only -            Not Card)

·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details 

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE  HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted  are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion

Electrical.Statement of Attainment

Perform rescue from a live LV panel

  •   Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  •   Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

        - RTO Name, Code and Logo

        - Units of competency code and name, date completed

        -Date certificate issued

        -Authorised person name or title (does not necessarily need a signature)

        -Issuing organisation’s logo / corporate identifier / unique watermark and / or                  document or certificate number

        -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only -            Not Card)

·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details 

·         Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

·         Expiry date is 13 months from date of training completion

Accepted Unit[s] of competency code and name:

  • UETDRMP007 - Perform rescue from a live low voltage panel
  • UETDRRF004 - Perform rescue from a live LV panel
  • UETTDRRF06 - Perform rescue from a live LV panel
  • UETTDRRF06B - Perform rescue from a live LV panel
  • UETTDRRF06A - Perform rescue from a live LV panel

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

·         Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

·         Expiry date is 13 months from date of training completion

Accepted UOC:

·         UETTDRRF06,; or

·         UETDRRF004at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 13 months from date of training completion


Image Added

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 13 months 1 year from date of training completion
Image Removed



Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescueEWP controlled descent escape

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

Accepted Unit[s] of competency code and name:

  • UETTDRRF08 - Perform EWP controlled descent escape
  • UETDRMP004 - Perform elevated work platform controlled descent escape
  • UETTDRRF08B - Perform EWP controlled descent escape
  • UETTDRRF08A - Perform EWP controlled descent escape

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escapeUETTDREL13 - Comply with environmental and incidental response procedures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Accepted course codes:

  • UETTDREL13 - Comply with environmental and incidental response procedures

  • UETDREL002 - Comply with environmental requirements

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completionnot required



Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response proceduresUETTDREL14 - Working safely near live electrical apparatus as a non electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Accepted course codes:

  • UETTDREL14

  • UETDREL006

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL14 - Working safely near Work safely in the vicinity of live electrical apparatus as a non electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

  • UETDREL005 - Work safely in the vicinity of live electrical apparatus
  • UETTDREL16 - Working safely near live electrical apparatus

UETTDREL16A - Working safely near live electrical apparatus

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL16 - Working safely UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatusUETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industryESI safety rules for work on, near or in the vicinity of electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

  • UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus
  • UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
  • UETTDRRF01B - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
  • UETTDRRF01A - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRRF01 UETTDRRF09 - Apply ESI safety rules, codes of practice and procedures for workaccess procedures to work on or near electrical network infrastructure

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Anchor
firstAidInESIEnviro
firstAidInESIEnviro
Electrical.Statement of Attainment

.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure

- First Aid in an ESI Environment

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

NOTE: The following unit codes are accepted:

  • UETTDRRF10 - Provide first aid in an ESI environment
  • UETDRRF007 - Provide first aid in an ESI environment
  • UETDRMP010 - Provide first aid in an ESI environment


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

Expiry

date

not required
Anchor
firstAidInESIEnviro
Electrical.Statement of AttainmentCertificate.UETTDRRF10 - First Aid in an ESI EnvironmentUETTDRRF11 - Testing of connections to low voltage electricity networks 
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.

Certificate

Statement of Attainment.

UETTDRRF11 - Testing of connections to low voltage electricity networks 

UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatusUETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment 

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation UETTDRVC26 – Cut vegetation at ground near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical apparatusappara

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparaapparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC34A AHCARB204A - Undertake release and rescue from a tree near live electrical apparatusstandard climbing techniques

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted.

NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniquesAHCPCM201A - Recognise plants

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted.NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.AHCPCM201A - Recognise plantsTLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)Apply work health and safety regulations, codes and practices in the workplace

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Accepted Unit[s] of competency code and name:

  • UEECD0007 - Apply work health and safety regulations, codes and practices in the workplace
  • UEENEEE001B - Apply OHS practices in the workplace
  • UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UEENEE101A - Apply OHS regulations, codes and practices in the workplaceUUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and proceduresUETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical workerAHCARB205A - Operate and maintain chainsaws

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsawsUETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatusUETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of AttainmentCertificate.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environmentUETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove)
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Certificate.UETTDRDP14A UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (glovestick)
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required
Electrical.Certificate.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick)
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required
Competency must be escalated externally to Transgrid to review/approve under all
circumstances		Issue Date = Determined by Transgrid
Expiry Date = Determined by Transgrid
  • meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Transgrid approved evidence training 

Competency must be escalated externally to Transgrid to review/approve under all
circumstances		Issue Date = Determined by Transgrid
Expiry Date = Determined by Transgrid

 Electrical.Certificate.III or IV in Electronics and Communications

  • Name on Degree to match the person registered
  • Bachelor Degree in Electrical Engineering to be listed
  • No expiry
  • Black and white or colour is acceptable
  • Issue date to be recorded 



Electrical.Diploma.or Degree Electrical Engineering

  • Name on Degree to match the person registered
  • Bachelor Degree in Electrical Engineering to be listed
  • No expiry
  • Black and white or colour is acceptable
  • Issue date to be recorded 


Image Added

Electrical.Certificate.III or IV in Telecommunications Technology

  • Name on certificate must match name in system
  • Certificate of proficiency in Electrical qualification to be listed
  • No expiry
  • Must be legible
  • Issue date to be recorded