Competency Name | Competency Requirements | Upload Requirements |
|
Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document- of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document Accepted Unit[s] of competency code and name: - UETDRMP006 - Perform pole top rescue
- UETDRRF003 - Perform pole top rescue
- UETTDRRF02 - Perform pole top rescue
- UETTDRRF02B - Perform pole top rescue
- UETTDRRF02A - Perform pole top rescue
o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 1 year from date of training completion
|
|
Electrical.Statement of Attainment .UETTDRRF03 - Perform EWP rescue | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document Accepted Unit[s] of competency code and name: - UETDRRF002 - Perform EWP rescue
- UETDRMP005 - Perform elevated work platform rescue
- UETTDRRF03 - Perform EWP rescue
o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 1 year from date of training completion
|
|
Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO.Issue of this document is an RTO. Accepted Unit[s] of competency code and name: - UETDRMP009 - Perform tower rescue
- UETDRRF006 - Perform tower rescue
- UETTDRRF04 - Perform tower rescue
- UETTDRRF04B - Perform tower rescue
- UETTDRRF04A - Perform tower rescue
Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 1 year from date of training completion
|
|
Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted
Accepted Unit[s] of competency code and name: - UETDRMP008 - Perform rescue from switchyard structures
- UETDRRF005 - Perform rescue from switchyard structures at heights
- UETTDRRF05 - Perform rescue from switchyard structures at heights
- UETTDRRF05B - Perform rescue from switchyard structures at heights
- UETTDRRF05A - Perform rescue from switchyard structures at heights
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 1 year from date of training completion
|
|
Electrical.Statement of Attainment Perform rescue from a live LV panel | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo - Units of competency code and name, date completed -Date certificate issued -Authorised person name or title (does not necessarily need a signature) -Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) ·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details **RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted · Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date · Expiry date is 13 months from date of training completion Accepted UOC: · UETTDRRF06,; or · UETDRRF004date is 13 months from date of training completion Accepted Unit[s] of competency code and name: - UETDRMP007 - Perform rescue from a live low voltage panel
- UETDRRF004 - Perform rescue from a live LV panel
- UETTDRRF06 - Perform rescue from a live LV panel
- UETTDRRF06B - Perform rescue from a live LV panel
- UETTDRRF06A - Perform rescue from a live LV panel
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 13 months from date of training completion
| |
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 1 year from date of training completion
|
|
Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only - Not Card)**RTO registration must only have been current at the time of training completion / awarding the document have been current at the time of training completion / awarding the document Accepted Unit[s] of competency code and name: - UETTDRRF08 - Perform EWP controlled descent escape
- UETDRMP004 - Perform elevated work platform controlled descent escape
- UETTDRRF08B - Perform EWP controlled descent escape
- UETTDRRF08A - Perform EWP controlled descent escape
o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date - Expiry date is 1 year from date of training completion
|
|
Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted course codes: Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted course codes: Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDREL16 - Working safely near Work safely in the vicinity of live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO.RTO. Accepted Unit[s] of competency code and name: - UETDREL005 - Work safely in the vicinity of live electrical apparatus
- UETTDREL16 - Working safely near live electrical apparatus
UETTDREL16A - Working safely near live electrical apparatus Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules , codes of practice and procedures for workfor work on, near or in the vicinity of electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO.of this document is an RTO. Accepted Unit[s] of competency code and name: - UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus
- UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
- UETTDRRF01B - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
- UETTDRRF01A - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
| Anchor |
|---|
| firstAidInESIEnviro |
|---|
| firstAidInESIEnviro |
|---|
|
Electrical.Statement of Attainment .UETTDRRF10 - First Aid in an ESI Environment | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted NOTE: The following unit codes are accepted: - UETTDRRF10 - Provide first aid in an ESI environment
- UETDRRF007 - Provide first aid in an ESI environment
- UETDRMP010 - Provide first aid in an ESI environment
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
| Electrical.Certificate.UETTDRRF11 - Testing of connections to low voltage electricity networks | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation at ground near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date |
|
Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniques | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted. NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.AHCPCM201A - Recognise plants | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more) | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date |
|
Electrical.Statement of Attainment.UEENEE101A - Apply OHS Apply work health and safety regulations, codes and practices in the workplace | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Accepted Unit[s] of competency code and name: - UEECD0007 - Apply work health and safety regulations, codes and practices in the workplace
- UEENEEE001B - Apply OHS practices in the workplace
- UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace
Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsaws | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
Electrical.Statement of Attainment.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted
| - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date
|
|
| Electrical.Certificate.UETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove) | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date |
|
| Electrical.Certificate.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick) | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date |
|
| Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue | - Applicants name to be shown on document
- Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
- Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
- RTO Name, Code and Logo
- Units of competency code and name, date completed
- Date certificate issued
- Authorised person name or title (does not necessarily need a signature)
- Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
- Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
**RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted | - Record the Issue date within Onsite as follows:
Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date |
|
Transgrid approved evidence training
| Competency must be escalated externally to Transgrid to review/approve under all
circumstances | Issue Date = Determined by Transgrid
Expiry Date = Determined by Transgrid |
|
Electrical.Certificate.III or IV in Electronics and Communications | - Name on Degree to match the person registered
- Bachelor Degree in Electrical Engineering to be listed
- No expiry
- Black and white or colour is acceptable
| - Issue date to be recorded
|
|
Electrical.Diploma.or Degree Electrical Engineering | - Name on Degree to match the person registered
- Bachelor Degree in Electrical Engineering to be listed
- No expiry
- Black and white or colour is acceptable
| - Issue date to be recorded
| |
Electrical.Certificate.III or IV in Telecommunications Technology | - Name on certificate must match name in system
- Certificate of proficiency in Electrical qualification to be listed
- No expiry
- Must be legible
| - Issue date to be recorded
|
|
