Versions Compared

Old Version 37

changes.mady.by.user Gracielle Molino

Saved on

compared with

New Version Current

changes.mady.by.user Marivic.Sumagaysay

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Image Removed

Expand
titleCertificates
AnchorcertificatescertificatesCompetency NameCompetency RequirementsUpload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

Electrical.Certificate III.Engineering - Electrical/Electronic Trade

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
  • The qualification must be a Certificate III.
  • The qualification must show: MEM30205 Certificate III in Engineering - Mechanical
  • Issue Date = Date of completion shown on certificate

    • No expiry date is required

    Electrical.Certificate III.Engineering - Industrial Electrician

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
    • The qualification must be a Certificate III
  • Issue Date = Date of completion shown on certificate
    • No expiry date is

    Image Added


    Expand
    titleCertificates

    Anchor
    certificates
    certificates

    Competency NameCompetency RequirementsUpload Requirements

    Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

    When Licence is uploaded:

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
    • Screenshots from websites are not accepted - Must be copy of the Licence
    • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
    • Black and white or coloured copy of evidence can be accepted

    When Invoice (For new contractor Licence) has been uploaded:

    • Applicants name to be displayed on uploaded evidence and to match applicants registered name
    • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
    • Date of receipt to be displayed on the invoice
    • Contractor number to be displayed on document
    • Must be issued by relevant state government authority
    • Black and white or coloured copy of evidence can be accepted

    Avetta verifiers click here for additional business rule information prior to verification of this competency

    When Licence is uploaded:

    • Expiry Date = The date of expiration on the evidence

    When Invoice (For new contractor Licence) has been uploaded:

    The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion


    Electrical.Certificate III.Engineering - Electrical/Electronic Trade

    • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
    • A qualification issued by a Register Training Organisation (RTO)
    • The qualification must be a Certificate III.
    • The qualification must show: MEM30205 Certificate III in Engineering - Mechanical


    • Issue Date = Date of completion shown on certificate

    • No expiry date is required




    Electrical.Certificate III.Engineering - Industrial Electrician

    • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
    • A qualification issued by a Register Training Organisation (RTO)
    • The qualification must be a Certificate III

    • Issue Date = Date of completion shown on certificate

    • No expiry date is required




    Electrical.Certificate III.Certificate III in Electrotechnology Electrician
    • Applicants name to be shown on documentation
    • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
    • Recognised Training Institution name to be displayed on document
    • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
    • Completion date or issue date must be displayed
    • Accepted course codes:
      • UEE30811
      • UTE31199
    • Document / Certificate / Number
    • No expiry
    Note: Evidence of Qualification.Licence.Electrical  orQualification.Certificate.Qualified Supervisor Certificate - Electrical Work is accepted as evidence. To be awarded either licence required the applicant to provide evidence of current or equivalent qualification to NSW Fair Trading.
    • Record the Issue date within Onsite:
      • Completion date - if listed on certificate (this completion date is always used when displayed)
      • Issue date - If only an issue date is listed please enter this as the issue date

    Certificate II in ESI -Asset Inspection and Testing

    Anchor
    AssetInspection
    AssetInspection
     

    • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
    • A qualification issued by a Register Training Organisation (RTO)
    • The qualification must be a Certificate II
    • The qualification must show: Certificate II in ESI – Asset Inspection and Testing or be listed as a superseded certificate as per https://training.gov.au/Training/Details/UET20621
    • Issue Date = Date of completion shown on certificate

    Qualification.Certificate III.Light Vehicle Mechanical Technology
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Qualification code and name. Acceptable codes and names are:
        • AUR30620 (or older) – Certificate III in Light Vehicle Mechanical Technology
        • AUR31520 (or older)– Certificate III in Automotive Diesel Engine Technology
        • AUR30320 (or older)– Certificate III in Automotive Electrical Technology
        • AUR32518 (or older) – Certificate III in Automotive Underbody Technology
        • AUR31420 (or older) – Certificate III in Automotive Diesel Fuel Technology
        • AUR32721 – Certificate III in Automotive Electric Vehicle Technology
        • AUR31316 (or older) – Certificate III in Automotive Engine Reconditioning
        • AUR31220 (or older) – Certificate III in Mobile Plant technology
        • AUR30720 (or older) Certificate III in Motor Sport Technology
        • AUR30405 (or older)– Certificate III in Automotive Mechanical Technology (Light Vehicle)
        • MSM31022 (or older) – Certificate III in Recreational Vehicle Service and repair

    NOTE: Qualification code that is shown in competency naming convention must be shown on evidence  Or any previous superseded equivalent qualification codes (which are indicated by changes in the last two numbers which relate to the Training Package update year eg. AUR30405 means it is the 2005 update version), shown against the mapping of this course on training.gov.au

      • Date of completion or issue date must be shown
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    Click HERE for Internal Process on acceptance of superseded unit of competency

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency, or industry accepted “LS” code, as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted

    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is not required




    Expand
    titleLicence


    Competency NameCompetency RequirementsUpload Requirements

    Qualification.Licence.Electrical

    Name on Electrical Licence to match the person registered

    Accepted form/s of evidence:

    • Electrical contractor licence
    • Supervisor certificate licence showing 'Q' can be accepted
    • New Zealand Electrical licence listing 'Inspector'
    • New Zealand practicing licence listing 'Electrician'
    • Screen shot showing that the licence is current for an interim period of 4 weeks and then the licence needs to be supplied

    Must be issued by nominated / relevant government department based on state of issue and reflect the corresponding logo

    Avetta verifiers click here for additional business rule information prior to verification of this competency

    • Expiry date to be recorded as shown on licence







    Expand
    titleStatement of Attainment


    Competency Name

    Competency Requirements

    Upload Requirements


    Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)
    **RTO registration must only have been current at the time of training completion / awarding the document
      • of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    Accepted Unit[s] of competency code and name:

    • UETDRMP006 - Perform pole top rescue
    • UETDRRF003 - Perform pole top rescue
    • UETTDRRF02 - Perform pole top rescue
    • UETTDRRF02B - Perform pole top rescue
    • UETTDRRF02A - Perform pole top rescue

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted

    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 1 year from date of training completion



    Electrical.Statement of Attainment .UETTDRRF03 - Perform EWP rescue

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    Accepted Unit[s] of competency code and name:

    • UETDRRF002 - Perform EWP rescue
    • UETDRMP005 - Perform elevated work platform rescue
    • UETTDRRF03 - Perform EWP rescue

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 1 year from date of training completion



    Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.the Issue of this document is an RTO.

    Accepted Unit[s] of competency code and name:

    • UETDRMP009 - Perform tower rescue
    • UETDRRF006 - Perform tower rescue
    • UETTDRRF04 - Perform tower rescue
    • UETTDRRF04B - Perform tower rescue
    • UETTDRRF04A - Perform tower rescue

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 1 year from date of training completion



    Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted


    Accepted Unit[s] of competency code and name:

    • UETDRMP008 - Perform rescue from switchyard structures
    • UETDRRF005 - Perform rescue from switchyard structures at heights
    • UETTDRRF05 - Perform rescue from switchyard structures at heights
    • UETTDRRF05B - Perform rescue from switchyard structures at heights
    • UETTDRRF05A - Perform rescue from switchyard structures at heights
    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 1 year from date of training completion



    Electrical.Statement of Attainment

    Perform rescue from a live LV panel

    •   Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    •   Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

            - RTO Name, Code and Logo

            - Units of competency code and name, date completed

            -Date certificate issued

            -Authorised person name or title (does not necessarily need a signature)

            -Issuing organisation’s logo / corporate identifier / unique watermark and / or                  document or certificate number

            -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only -            Not Card)

    ·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details 

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted

    ·         Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    ·         Expiry date is 13 months from date of training completion

    Accepted UOC:

    ·         UETTDRRF06,; or

    ·         UETDRRF004

    ·         UETDRMP007from date of training completion

    Accepted Unit[s] of competency code and name:

    • UETDRMP007 - Perform rescue from a live low voltage panel
    • UETDRRF004 - Perform rescue from a live LV panel
    • UETTDRRF06 - Perform rescue from a live LV panel
    • UETTDRRF06B - Perform rescue from a live LV panel
    • UETTDRRF06A - Perform rescue from a live LV panel

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 13 months from date of training completion


    Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 1 year from date of training completion



    Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only

    - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    have been current at the time of training completion / awarding the document

    Accepted Unit[s] of competency code and name:

    • UETTDRRF08 - Perform EWP controlled descent escape
    • UETDRMP004 - Perform elevated work platform controlled descent escape
    • UETTDRRF08B - Perform EWP controlled descent escape
    • UETTDRRF08A - Perform EWP controlled descent escape

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence is not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date is 1 year from date of training completion



    Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Accepted course codes:

    • UETTDREL13 - Comply with environmental and incidental response procedures

    • UETDREL002 - Comply with environmental requirements

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Accepted course codes:

    • UETTDREL14

    • UETDREL006

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDREL16 - Working safely near Work safely in the vicinity of live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.document is an RTO.

    Accepted Unit[s] of competency code and name:

    • UETDREL005 - Work safely in the vicinity of live electrical apparatus
    • UETTDREL16 - Working safely near live electrical apparatus

    UETTDREL16A - Working safely near live electrical apparatus

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted
    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules , codes of practice and procedures for workfor work on, near or in the vicinity of electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the documento    Document verifier to ensure the Issue of this document is an RTO./ awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Accepted Unit[s] of competency code and name:

    • UETDRMP002 - ESI safety rules for work on, near or in the vicinity of electrical apparatus
    • UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
    • UETTDRRF01B - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus
    • UETTDRRF01A - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted
    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Anchor
    firstAidInESIEnviro
    firstAidInESIEnviro
    Electrical.Statement of Attainment- First Aid in an ESI Environment

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted

    NOTE: . Only The following unit codes are accepted:

    • UETTDRRF10 - Provide first aid in an ESI environment

    OR

    • UETDRRF007 UETDRRF007 - Provide first aid in an ESI environment
    • UETDRMP010 - Provide first aid in an ESI environment


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Certificate.UETTDRRF11 - Testing of connections to low voltage electricity networks 
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted

    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment 

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation at ground near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required

    Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniques

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted.

    NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.AHCPCM201A - Recognise plants

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE:Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required

    Electrical.Statement of Attainment.UEENEE101A - Apply OHS Apply work health and safety regulations, codes and practices in the workplace

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Accepted Unit[s] of competency code and name:

    • UEECD0007 - Apply work health and safety regulations, codes and practices in the workplace
    • UEENEEE001B - Apply OHS practices in the workplace
    • UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted
    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsaws

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted
    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Statement of Attainment.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment

    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted


    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required



    Electrical.Certificate.UETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove)
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted

    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required

    Electrical.Certificate.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick)
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted

    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required

    Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue
    • Applicants name to be shown on document
    • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
    • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
      • RTO Name, Code and Logo
      • Units of competency code and name, date completed
      • Date certificate issued
      • Authorised person name or title (does not necessarily need a signature)
      • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
      • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

    **RTO registration must only have been current at the time of training completion / awarding the document

    o    Document verifier to ensure the Issue of this document is an RTO.

    Click HERE for Internal Process on checking RTO’s

    NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

    NOTE: Temporary / Interim statement of attainment evidence not accepted

    • Record the Issue date within Onsite as follows:

    Completion date / Training Date - if listed on certificate (this date is always used when displayed)

    Issue date - If only an issue date is listed please enter this as the issue date

    • Expiry date not required

    Transgrid approved evidence training 

    		Competency must be escalated externally to Transgrid to review/approve under all
    circumstances    		Issue Date = Determined by Transgrid
    Expiry Date = Determined by Transgrid

     Electrical.Certificate.III or IV in Electronics and Communications

    • Name on Degree to match the person registered
    • Bachelor Degree in Electrical Engineering to be listed
    • No expiry
    • Black and white or colour is acceptable
    • Issue date to be recorded 



    Electrical.Diploma.or Degree Electrical Engineering

    • Name on Degree to match the person registered
    • Bachelor Degree in Electrical Engineering to be listed
    • No expiry
    • Black and white or colour is acceptable
    • Issue date to be recorded 


    Electrical.Certificate.III or IV in Telecommunications Technology

    • Name on certificate must match name in system
    • Certificate of proficiency in Electrical qualification to be listed
    • No expiry
    • Must be legible
    • Issue date to be recorded