Competency | Competency Requirements | Upload Requirements | Examples |
---|
Gas.Certificate of Competency.10 Standard Pressure Control | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control
AND NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Standard Pressure control
- GANZ approval of qualification equivalent of Standard Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.11 Complex Pressure Control | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control
AND NZQA Record of Achievement showing completion of the following unit standards: US 30384, 30385 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Complex Pressure control
- GANZ approval of qualification equivalent of Complex Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.12 Network Leakage Response | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response
AND NZQA Record of Achievement showing completion of the following unit standards: US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Network Leakage Response
- GANZ approval of qualification equivalent of Network Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect
AND NZQA Record of Achievement showing completion of the following unit standards: US30370, 30382, 30383, 32040, 32041, 32042 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect, and/or Reconnect
- GANZ approval of qualification equivalent of Gas Fitter - GMS Change, Disconnect, and/or Reconnect
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.14 Gas Fitter - Gas Leakage Response on GMS <25m3/hr | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND NZQA Record of Achievement showing completion of the following unit standards: US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Fitter - Gas Leakage Response on GMS <25m3/hr
- GANZ approval of qualification equivalent of Gas Fitter - Gas Leakage Response on GMS <25m3/hr
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.2 Safety Induction | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction
AND NZQA Record of Achievement showing completion of the following unit standards: US497, 17593, 32105 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Safety Induction
- GANZ approval of qualification equivalent of Safety Induction
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.3 Safe Working | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working
AND NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Safe Working
- GANZ approval of qualification equivalent of Safe Working
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.4 Gas Foundation | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation
AND NZQA Record of Achievement showing completion of the following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Foundation
- GANZ approval of qualification equivalent of Safe Working
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.5 Replace GMS <25m3/hour | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour
AND NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Replace GMS <25m3/hour
- GANZ approval of qualification equivalent of GMS <25m3/hour
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.6 PE Pipelaying Only | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only
AND NZQA Record of Achievement showing completion of the following unit standards: US10995, US10988, 11328, 20869, 20877, 20878, 23086, 25610, 30380, 31448, 32035 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipelaying Only
- GANZ approval of qualification equivalent of PE Pipelaying Only
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of SPE Pipelaying Only
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.7 Construct PE Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services
AND NZQA Record of Achievement showing completion of the following unit standards: US10975, 10981, 10988, 23086, 25610, 30382, 31448, 32035, 32336, 32332, 32338 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct PE Services
- GANZ approval of qualification equivalent of Construct PE Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.8 Construct PE Mains | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains
AND NZQA Record of Achievement showing completion of the following unit standards: US30371, 30374, 30377, 32335, 32339 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct PE Mains
- GANZ approval of qualification equivalent of Construct PE Mains
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.9 Construct Steel Mains and Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services
AND NZQA Record of Achievement showing completion of the following unit standards: US9550, 10982, 10984, 10993, 32036, 32337 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct Steel Mains and Services
- GANZ approval of qualification equivalent of Construct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E1 PE Pipe Jointing Electro Fusion | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion
AND NZQA Record of Achievement showing completion of the following unit standards: US10980 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipe Jointing Electro Fusion
- GANZ approval of qualification equivalent of PE Pipe Jointing Electro Fusion
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E10 Leakage Survey (Walking) | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking)
AND NZQA Record of Achievement showing completion of the following unit standards: US32330 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking) AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Leakage Survey (Walking)
- GANZ approval of qualification equivalent of Leakage Survey (Walking)
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking)
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E11 Leakage Survey (Vehicle) | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training
AND NZQA Record of Achievement showing completion of the following unit standards: US32331 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Standard Pressure control
- GANZ approval of qualification equivalent of Standard Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E12 Issue Work Permits | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits
AND NZQA Record of Achievement showing completion of the following unit standards: US17590 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Issue Work Permits
- GANZ approval of qualification equivalent of Issue Work Permits
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt Fusion | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion
AND NZQA Record of Achievement showing completion of the following unit standards: US10987 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipe Jointing - Butt Fusion
- GANZ approval of qualification equivalent of PE Pipe Jointing - Butt Fusion
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E3 Hydrostatic Testing | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing
AND NZQA Record of Achievement showing completion of the following unit standards: US10972 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Hydrostatic Testing control
- GANZ approval of qualification equivalent of Hydrostatic Testing control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency.E4 Hot Tap Steel Pipe | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Standard Pressure Control AND NZQA Record of Achievement showing completion of the following unit standards: | US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041US10983 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Standard Pressure Control- Hot Tap Steel Pipe AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Standard Pressure control- Hot Tap Steel Pipe
- GANZ approval of qualification equivalent of Hot Tap Steel Pipe
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Standard Pressure Control | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency. | 11 Complex Pressure ControlE5 Install CP Test Points | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Complex Pressure Control AND NZQA Record of Achievement showing completion of the following unit standards: | US 30384, 30385US12509 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Complex Pressure Control- Install CP Test Points AND a copy of
| their - either
- Mito CoC card or MITO database
| screenshot showing expired Complex Pressure control- screenshot showing expired Install CP Test Points
- GANZ approval of qualification equivalent of Install CP Test Points
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Complex Pressure Control | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency. | 12 Network Leakage ResponseE6 Odorant Survey | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Network Leakage ResponseAND NZQA Record of Achievement showing completion of the following unit standards: | US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334US 20590 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Network Leakage Response - Odorant Survey AND a copy of
| their - either either
- Mito CoC card or MITO database screenshot showing expired
| Network Leakage Response- Odorant Survey
- GANZ approval of qualification equivalent of Odorant Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Network Leakage Response | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency. | 13 Gas Fitter - GMS Change, Disconnect, and/or ReconnectE7 Cathodic Protection Survey | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - GMS Change, Disconnect, and/or Reconnect- Cathodic Protection Survey
AND NZQA Record of Achievement showing completion of the following unit standards: | US30370, 30382, 30383, 32040, 32041, 32042US32036, 32037 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - GMS Change, Disconnect, and/or Reconnect- Cathodic Protection Survey AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Gas Fitter - GMS Change, Disconnect, and/or Reconnect- Cathodic Protection Survey
- GANZ approval of qualification equivalent of Cathodic Protection Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds | 3 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - GMS Change, Disconnect, and/or Reconnect- Cathodic Protection Survey
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency. | 14 Gas Fitter - Gas Leakage Response on GMS <25m3/hrE8 Mark-outs & Standovers | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND NZQA Record of Achievement showing completion of the following unit standards: | US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042US30379 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr- Mark-outs & Standovers AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr- Mark-outs & Standovers
- GANZ approval of qualification equivalent of Mark-outs & Standovers
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds | 3 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency. | 2 Safety Induction | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Safety Induction AND NZQA Record of Achievement showing completion of the following unit standards: | US497, 17593, 32105US12518 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Safety Induction- Valve Maintenance AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Safety Induction- Valve Maintenance
- GANZ approval of qualification equivalent of Valve Maintenance
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Safety Induction | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
| Gas.Certificate of Competency. | 3 Safe WorkingThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working
AND NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265 OR Construction of Mains and Services - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Safe Working- Construction of Mains and Services AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Safe Working- Construction of Mains and Services
- GANZ approval of qualification equivalent of Construction of Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR
| black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateGas.Certificate of Competency.4 Gas Foundation | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation
AND NZQA Record of Achievement showing completion of the following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042 ORNot Required |
| Gas.Certificate of Competency.Construction Pipelaying - Grandfather / Equivalent Qualification | The required evidence will be : - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Foundation - Construction Pipelaying AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Gas Foundation- Construction Pipelaying
- GANZ approval of qualification equivalent of Construction Pipelaying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black
| and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation Date application has been proceededAssessment Date on Report Expiry Date= | 2 years following issue dateNot Required |
| Gas.Certificate of Competency. | 5 Replace GMS <25m3/hourAND NZQA Construction Service Laying - Grandfather / Equivalent Qualification | The required evidence will be one of the following: |
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour
- NZQA Record of Achievement showing completion of the following
| unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041OR- Qualification: National Certificate in Gas Networks Construction Service Laying Level 3
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick"
| of Replace GMS <25m3/hour - of Construction Service Laying AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Replace GMS <25m3/hour - Construction Service Laying
- GANZ approval of qualification equivalent of Construction Service Laying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
Where the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace GMS <25m3/hour training Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | 6 PE Pipelaying OnlyThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only
AND NZQA Record of Achievement showing completion of the following unit standards: US10995, US10988, 11328, 20869, 20877, 20878, 23086, 25610, 30380, 31448, 32035 1 ORCP Survey - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| PE Pipelaying Only- Cathodic Pressure (CP) Survey AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| PE Pipelaying Only- Cathodic Pressure (CP) Survey
- GANZ approval of qualification equivalent of Cathodic Pressure (CP) Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR
| black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of SPE Pipelaying Only Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | 7 Construct PE ServicesThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services
AND NZQA Record of Achievement showing completion of the following unit standards: US10975, 10981, 10988, 23086, 25610, 30382, 31448, 32035, 32336, 32332, 32338 ORGMS Disconnection/Reconnection - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construct PE Services- GMS Disconnection/Reconnection AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Construct PE Services- GMS Disconnection/Reconnection
- GANZ approval of qualification equivalent of GMS Disconnection/Reconnection
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour
| copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services - copy OR black and white copy
| Issue Date= | Date application has been proceededExpiry Date= 3 years following issue date Gas.Certificate of Competency.8 Construct PE Mains | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains
AND NZQA Record of Achievement showing completion of the following unit standards: US30371, 30374, 30377, 32335, 32339 1 ORAssessment Date on Report Expiry Date= Not Required |
| Gas.Certificate of Competency.GMS Leakage Response - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construct PE Mains- GMS Leakage Response AND a copy of their
- Mito CoC card or MITO database screenshot showing expired
| Construct PE Mains- GMS Leakage Response
- GANZ approval of qualification equivalent of GMS Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour
| copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains- copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | 9 Construct Steel Mains and ServicesLeakage Survey - Grandfather / Equivalent Qualification | The required evidence will be one of the following: |
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services
AND - NZQA Record of Achievement showing completion of the following
| unit standards: US9550, 10982, 10984, 10993, 32036, 32337OR- Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 12507, 12504 (Walking) and/or 12505 (Vehicle)
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| SConstruct Steel Mains and Services- Leakage Survey AND either a copy of
| their - Mito CoC card or MITO database screenshot showing expired
| Construct Steel Mains and Services- Leakage Survey
- GANZ approval of qualification equivalent of Leakage Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
Where the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E1 PE Pipe Jointing Electro FusionAND Mark Out, Stand-Overs and Location Survey - Grandfather / Equivalent Qualification | The required evidence will be one of the following: |
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion
- NZQA Record of Achievement showing completion of the following
| unit standards: US10980OR- Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 10992, 1955, 20877, 20878 or 5627
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| PE Pipe Jointing Electro Fusion AND - Mark Out, Stand-Overs and Location Survey AND either a copy of
| their - Mito CoC card or MITO database screenshot showing expired
| PE Pipe Jointing Electro Fusion- Mark Out, Stand-Overs and Location Survey
- GANZ approval of qualification equivalent of Mark Out, Stand-Overs and Location Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
Where the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E10 Leakage Survey (Walking)The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking)
AND NZQA Record of Achievement showing completion of the following unit standards: US32330 ORNetwork Advanced Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Leakage Survey (Walking)- Network Advanced Pressure Control AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Leakage Survey (Walking)- Network Advanced Pressure Control
- GANZ approval of qualification equivalent of Network Advanced Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be
| in colour copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking)- in colour copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E11 Leakage Survey (Vehicle)Network Operations - Grandfather / Equivalent Qualification | The required evidence | will be one of the following:- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training
AND NZQA Record of Achievement showing completion of the following unit standards: US32331 ORwill be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Leakage Survey (Vehicle) training - Network Operations AND a copy of their
- Mito CoC card or MITO database screenshot showing expired
| Standard Pressure control- Network Operations
- GANZ approval of qualification equivalent of Network Operations
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for
| 'Christopher' is accepted).Copy must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training
Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date- 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
| Gas.Certificate of Competency. | E12 Issue Work PermitsThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits
AND NZQA Record of Achievement showing completion of the following unit standards: US17590 ORNetwork Standard Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Issue Work Permits - Network Standard Pressure Control AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Issue Work Permits- Network Standard Pressure Control
- GANZ approval of qualification equivalent of Network Standard Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
| Copy must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E2 PE Pipe Jointing - Butt FusionOdorant Survey - Grandfather / Equivalent Qualification | The required evidence will be one | of the following:- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion
AND NZQA of the following: - NZQA Record of Achievement showing completion of the following
| unit standards: US10987OR- Qualification: National Certificate in Gas Industry Level AND Unit Standards: 12507, 20590
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Standard Pressure Control- Odorant Survey AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| PE Pipe Jointing - Butt Fusion - Odorant Survey
- GANZ approval of qualification equivalent of Odorant Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
Where the evidence completion date exceeds 2 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateCertificate of Competency.E3 Hydrostatic TestingThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing
AND NZQA Record of Achievement showing completion of the following unit standards: US10972 ORInduction.Authorised Restricted Access Induction | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Hydrostatic Testing AND a copy of their Mito CoC card or MITO database screenshot showing expired Hydrostatic Testing control- Authorised Restricted Access Induction
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds | 2 an an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Hydrostatic Testing - Authorized Restricted Access Induction
| Issue Date= Date application has been proceeded Expiry Date= | 3 2 years following issue date |
| Gas.Certificate of Competency. | E4 Hot Tap Steel PipeThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe
AND NZQA Record of Achievement showing completion of the following unit standards: US10983 ORComplex Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Hot Tap Steel Pipe- Complex Pressure Control AND a copy of either
- Copy of their Mito CoC card or MITO database screenshot showing expired
| Hot Tap Steel Pipe - Complex Pressure Control
- GANZ approval of overseas qualification equivalent of Complex Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy
| must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe - must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E5 Install CP Test PointsThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points
AND NZQA Record of Achievement showing completion of the following unit standards: US12509 ORConstruct PE Mains - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Install CP Test Points- Construct PE Mains AND a copy of either
- Copy of their Mito CoC card or MITO database screenshot showing expired
| Install CP Test Points- Construct PE Mains
- GANZ approval of overseas qualification equivalent of Construct PE Mains
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must
| be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points - be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E6 Odorant SurveyThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey
AND NZQA Record of Achievement showing completion of the following unit standards: US 20590 ORConstruct Steel Mains and Services - Grandfather / Equivalent Qualification
| The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Odorant Survey - Construct Steel Mains and Services AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Odorant Survey - Construct Steel Mains and Services
- GANZ approval of overseas qualification equivalent of Construct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be
| in colour copy OR black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey - in colour copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E7 Cathodic Protection SurveyGas Fitter - GMS Change, Disconnect and/or Reconnect - Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Cathodic Protection Survey AND NZQA Record of Achievement showing completion of the following unit standards: US32036, 32037 OR Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey AND a copy of their - Gas Fitter - GMS Change, Disconnect and/or Reconnect AND a Copy of either
- Mito CoC card or MITO database screenshot showing expired
| Cathodic Protection Survey - Gas Fitter - GMS Change, Disconnect and/or Reconnect
- GANZ approval of overseas qualification equivalent of Gas Fitter - GMS Change, Disconnect and/or Reconnect
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR
| black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E8 Mark-outs & StandoversGas Fitter – Gas Leakage Response on GMS <25m3/hr Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Mark-outs & StandoversAND NZQA Record of Achievement showing completion of the following unit standards: US30379 OR Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers- Gas Fitter – Gas Leakage Response on GMS <25m3/hr AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Mark-outs & Standovers- Gas Fitter – Gas Leakage Response on GMS <25m3/hr
- GANZ approval of overseas qualification equivalent of Gas Fitter – Gas Leakage Response on GMS <25m3/hr
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must
| be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers- be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= | Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue dateNot Required |
| Gas.Certificate of Competency. | E9 Valve MaintenanceThe required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance
AND NZQA Record of Achievement showing completion of the following unit standards: US12518 ORNetwork Leakage Response - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Valve Maintenance- Network Leakage Response AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| Valve Maintenance - Network Leakage Response
- GANZ approval of overseas qualification equivalent of Network Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
|
Where the evidence completion date exceeds 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance
Date application has been proceededAssessment Date on Report Expiry Date= | 3 years following issue date
|