Competency | Competency Requirements | Upload Requirements | Examples |
---|
Gas.Certificate of Competency.10 Standard Pressure Control | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr - Standard Pressure Control
AND NZQA Record of Achievement showing completion of the following unit standards: | US12507, 19552, 30370US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383 | , 32040, 32041 | , 32042OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick"
| of Gas Fitter - Gas Leakage Response on GMS <25m3/hr- of Standard Pressure Control AND a copy of
| either- either
- Mito CoC card or MITO database screenshot showing expired
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr- Standard Pressure control
- GANZ approval of qualification equivalent of
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr- Standard Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Gas Fitter - Gas Leakage Response on GMS <25m3/hr - Standard Pressure Control
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.2 Safety Induction11 Complex Pressure Control | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction Complex Pressure Control
AND NZQA Record of Achievement showing completion of the following unit standards: US497, 17593, 32105US 30384, 30385 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety InductionComplex Pressure Control AND a copy of eithereither
- Mito CoC card or MITO database screenshot showing expired Safety InductionComplex Pressure control
- GANZ approval of qualification equivalent of Safety InductionComplex Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety InductionComplex Pressure Control
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.3 Safe Working12 Network Leakage Response | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe WorkingNetwork Leakage Response
AND NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265 US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe WorkingNetwork Leakage Response AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Safe WorkingNetwork Leakage Response
- GANZ approval of qualification equivalent of Safe WorkingNetwork Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe WorkingNetwork Leakage Response
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.4 Gas Foundation13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation Fitter - GMS Change, Disconnect, and/or Reconnect
AND NZQA Record of Achievement showing completion of the following unit standards: US10995 US30370, 1132730382, 1132830383, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 3204032040, 32041, 32042 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation Fitter - GMS Change, Disconnect, and/or Reconnect AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas FoundationFitter - GMS Change, Disconnect, and/or Reconnect
- GANZ approval of qualification equivalent of Safe WorkingGas Fitter - GMS Change, Disconnect, and/or Reconnect
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas FoundationFitter - GMS Change, Disconnect, and/or Reconnect
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. 5 Replace 14 Gas Fitter - Gas Leakage Response on GMS <25m3/ hour | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace of Gas Fitter - Gas Leakage Response on GMS <25m3/hour hr AND NZQA Record of Achievement showing completion of the following unit standards:
US5929 10984, 12456, 19555, 19557, 19560- 19552, 30370, 30382, 30383, 32040, 32041, 32042
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace of Gas Fitter - Gas Leakage Response on GMS <25m3/hour hr AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Replace Gas Fitter - Gas Leakage Response on GMS <25m3/hour hr
- GANZ approval of qualification equivalent of Gas Fitter - Gas Leakage Response on GMS <25m3/hourhr
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Replace of Gas Fitter - Gas Leakage Response on GMS <25m3/hour traininghr
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.6 PE Pipelaying Only2 Safety Induction | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only Safety Induction
AND NZQA Record of Achievement showing completion of the following unit standards:US10995 US497, US10988, 11328, 20869, 20877, 20878, 23086, 25610, 30380, 31448, 3203517593, 32105 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying OnlySafety Induction AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipelaying OnlySafety Induction
- GANZ approval of qualification equivalent of PE Pipelaying OnlySafety Induction
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of SPE Pipelaying Only Safety Induction
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.7 Construct PE Services3 Safe Working | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services Safe Working
AND NZQA Record of Achievement showing completion of the following unit standards:US10975 US3271, 109816401, 109886402, 23086, 25610, 30382, 31448, 32035, 32336, 32332, 3233818426, 30265 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE ServicesSafe Working AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct PE ServicesSafe Working
- GANZ approval of qualification equivalent of Construct PE ServicesSafe Working
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services Safe Working
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.8 Construct PE Mains4 Gas Foundation | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE MainsGas Foundation
AND NZQA Record of Achievement showing completion of the following unit standards: US30371, 30374, 30377, 32335, 32339 US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains Gas Foundation AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct PE MainsGas Foundation
- GANZ approval of qualification equivalent of Construct PE MainsSafe Working
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copywhite copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE MainsGas Foundation
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. 9 Construct Steel Mains and Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Servicesof Replace GMS <25m3/hour
AND NZQA Record of Achievement showing completion of the following unit standards: US9550, 10982, 10984, 10993, 32036, 32337US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services of Replace GMS <25m3/hour AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Construct Steel Mains and ServicesReplace GMS <25m3/hour
- GANZ approval of qualification equivalent of Construct Steel Mains and ServicesGMS <25m3/hour
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copycopy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Servicesof Replace GMS <25m3/hour training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | E1 PE Pipe Jointing Electro Fusion6 PE Pipelaying Only | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE
| Pipe Jointing Electro Fusion AND NZQA Record of Achievement showing completion of the following unit standards: | US10980 US10995, US10988, 11328, 20869, 20877, 20878, 23086, 25610, 30380, 31448, 32035 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE
| Pipe Jointing Electro Fusion - Pipelaying Only AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE
| Pipe Jointing Electro Fusion- Pipelaying Only
- GANZ approval of qualification equivalent of PE
| Pipe Jointing Electro Fusion- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| PE Pipe Jointing Electro Fusion | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E10 Leakage Survey (Walking)7 Construct PE Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking) Construct PE Services
AND NZQA Record of Achievement showing completion of the following unit standards: US32330US10975, 10981, 10988, 23086, 25610, 30382, 31448, 32035, 32336, 32332, 32338 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking) Construct PE Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Leakage Survey (Walking)Construct PE Services
- GANZ approval of qualification equivalent of Leakage Survey (Walking)of Construct PE Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking)Construct PE Services
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E11 Leakage Survey (Vehicle)8 Construct PE Mains | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) trainingConstruct PE Mains
AND NZQA Record of Achievement showing completion of the following unit standards: US32331unit standards: US30371, 30374, 30377, 32335, 32339 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training Construct PE Mains AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Standard Pressure controlConstruct PE Mains
- GANZ approval of qualification equivalent of Standard Pressure controlConstruct PE Mains
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) trainingConstruct PE Mains
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. E12 Issue Work Permits9 Construct Steel Mains and Services | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work PermitsConstruct Steel Mains and Services
AND NZQA Record of Achievement showing completion of the following unit standards: US17590 US9550, 10982, 10984, 10993, 32036, 32337 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits Construct Steel Mains and Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Issue Work PermitsConstruct Steel Mains and Services
- GANZ approval of qualification equivalent of Issue Work PermitsConstruct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work PermitsConstruct Steel Mains and Services
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | E2 E1 PE Pipe Jointing | - Butt Electro Fusion | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing
| - Butt Fusion AND NZQA Record of Achievement showing completion of the following unit standards: | US10987US10980 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Standard Pressure Control - PE Pipe Jointing Electro Fusion AND a copy of either
- Mito CoC card or MITO database screenshot showing expired PE Pipe Jointing
| - Butt Fusion - Electro Fusion
- GANZ approval of qualification equivalent of PE Pipe Jointing
| - Butt Fusion - Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing
| - Butt | Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E3 Hydrostatic TestingE10 Leakage Survey (Walking) | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing Leakage Survey (Walking)
AND NZQA Record of Achievement showing completion of the following unit standards: US10972US32330 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing Leakage Survey (Walking) AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Hydrostatic Testing controlLeakage Survey (Walking)
- GANZ approval of qualification equivalent of Hydrostatic Testing controlof Leakage Survey (Walking)
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing Leakage Survey (Walking)
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E4 Hot Tap Steel PipeE11 Leakage Survey (Vehicle) | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe Leakage Survey (Vehicle) training
AND NZQA Record of Achievement showing completion of the following unit standards: US10983US32331 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe Leakage Survey (Vehicle) training AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Hot Tap Steel Pipe Standard Pressure control
- GANZ approval of qualification equivalent of Hot Tap Steel Pipe Standard Pressure control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copycopy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe Leakage Survey (Vehicle) training
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. E5 Install CP Test Points | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test PointsIssue Work Permits
AND NZQA Record of Achievement showing completion of the following unit standards: US12509 US17590 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points Issue Work Permits AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Install CP Test PointsIssue Work Permits
- GANZ approval of qualification equivalent of Install CP Test PointsIssue Work Permits
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points Issue Work Permits
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E6 Odorant SurveyE2 PE Pipe Jointing - Butt Fusion | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey of PE Pipe Jointing - Butt Fusion
AND NZQA Record of Achievement showing completion of the following unit standards: US 20590US10987 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey Standard Pressure Control AND a copy of either either
- Mito CoC card or MITO database screenshot showing expired Odorant Survey PE Pipe Jointing - Butt Fusion
- GANZ approval of qualification equivalent of Odorant SurveyPE Pipe Jointing - Butt Fusion
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey PE Pipe Jointing - Butt Fusion
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E7 Cathodic Protection SurveyE3 Hydrostatic Testing | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey Hydrostatic Testing
AND NZQA Record of Achievement showing completion of the following unit standards: US32036, 32037US10972 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection SurveyHydrostatic Testing AND a copy of either either
- Mito CoC card or MITO database screenshot showing expired Cathodic Protection Survey Hydrostatic Testing control
- GANZ approval of qualification equivalent of Cathodic Protection SurveyHydrostatic Testing control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copycopy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey Hydrostatic Testing
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency.E8 Mark-outs & StandoversE4 Hot Tap Steel Pipe | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & StandoversHot Tap Steel Pipe
AND NZQA Record of Achievement showing completion of the following unit standards: US30379US10983 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & StandoversHot Tap Steel Pipe AND a copy of either either
- Mito CoC card or MITO database screenshot showing expired
Mark-outs & Standovers- Hot Tap Steel Pipe
- GANZ approval of qualification equivalent of
Mark-outs & Standovers
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 2 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & StandoversHot Tap Steel Pipe
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Competency.E9 Valve MaintenanceCompetency.E5 Install CP Test Points | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance Install CP Test Points
AND NZQA Record of Achievement showing completion of the following unit standards: US12518US12509 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve MaintenanceInstall CP Test Points AND a copy of either either
- Mito CoC card or MITO database screenshot showing expired Valve Maintenance Install CP Test Points
- GANZ approval of qualification equivalent of Valve Maintenance Install CP Test Points
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance Install CP Test Points
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | Construction Service Laying – Grandfather / QualificationE6 Odorant Survey | The required evidence will be one of the following: | NZQA - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey
AND NZQA Record of Achievement showing completion of the following | Qualification: National Certificate in Gas Networks Construction Service Laying Level 3unit standards: US 20590 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construction Service Laying - Odorant Survey AND a copy of either either
- Mito CoC card or MITO database screenshot showing expired
| Construction Service Laying- Odorant Survey
- GANZ approval of qualification equivalent of
| Construction Service Laying- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is
| accepted).Copy must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | Construction of Mains and Services - Grandfather / Equivalent QualificationE7 Cathodic Protection Survey | The required evidence will | be:be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey
AND NZQA Record of Achievement showing completion of the following unit standards: US32036, 32037 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construction of Mains and Services- Cathodic Protection Survey AND a copy of
| either- either
- Mito CoC card or MITO database screenshot showing expired
| Construction of Mains and Services- Cathodic Protection Survey
- GANZ approval of qualification equivalent of
| Construction of Mains and Services- Cathodic Protection Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for '
| Christopher' is accepted).Copy must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | Construction Pipelaying - Grandfather / Equivalent QualificationE8 Mark-outs & Standovers | The required evidence will | be :be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers
AND NZQA Record of Achievement showing completion of the following unit standards: US30379 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construction Pipelaying - Mark-outs & Standovers AND a copy of
| either- either
- Mito CoC card or MITO database screenshot showing expired
| Construction Pipelaying- Mark-outs & Standovers
- GANZ approval of qualification equivalent of
| Construction Pipelaying- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher
| ' is accepted).Copy must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 2 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | Construction Service Laying – Grandfather / Equivalent Qualification | The required evidence will be one of the following: | NZQA - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance
AND NZQA Record of Achievement showing completion of the following | Qualification: National Certificate in Gas Networks Construction Service Laying Level 3unit standards: US12518 OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Construction Service Laying | either - a copy of either
- Mito CoC card or MITO database screenshot showing expired
| Construction Service Laying- Valve Maintenance
- GANZ approval of qualification equivalent of
| Construction Service Laying- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that
| is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).Copy must be clear and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance
| Issue Date= Date application has been proceeded Expiry Date= 3 years following issue date |
|
Gas.Certificate of Competency. | CP Survey - Grandfather Construction of Mains and Services - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick"
| of Cathodic Pressure (CP) Survey- of Construction of Mains and Services AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
| Cathodic Pressure (CP) Survey- Construction of Mains and Services
- GANZ approval of qualification equivalent
| of Cathodic Pressure (CP) Survey- of Construction of Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency.GMS Disconnection/Reconnection Construction Pipelaying - Grandfather / Equivalent Qualification | The required evidence will be : - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of GMS Disconnection/ReconnectionConstruction Pipelaying AND a copy of either
- Mito CoC card or MITO database screenshot showing expired
GMS Disconnection/Reconnection- Construction Pipelaying
- GANZ approval of qualification equivalent of
GMS Disconnection/Reconnection- Construction Pipelaying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency. | GMS Leakage Response Construction Service Laying - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Networks Construction Service Laying Level 3
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| GMS Leakage Response- Construction Service Laying AND a copy of
| their - either
- Mito CoC card or MITO database screenshot showing expired
| GMS Leakage Response- Construction Service Laying
- GANZ approval of qualification equivalent of
| GMS Leakage Response- Construction Service Laying
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency. Leakage – - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 12507, 12504 (Walking) and/or 12505 (Vehicle)Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Cathodic Pressure (CP) Survey AND either a copy of either
- Mito CoC card or MITO database screenshot showing expired Leakage Cathodic Pressure (CP) Survey
- GANZ approval of qualification equivalent of Leakage of Cathodic Pressure (CP) Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency. | Mark Out, Stand-Overs and Location Survey – GMS Disconnection/Reconnection - Grandfather / Equivalent Qualification | The required evidence will be | one of the following: | NZQA Record of Achievement showing completion of the following Qualification: National Certificate in | Industry Level 2 AND Unit Standards: 10992, 1955, 20877, 20878 or 5627Gas - CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of
| Mark Out, Stand-Overs and Location Survey - GMS Disconnection/Reconnection AND
| either - a copy of either
- Mito CoC card or MITO database screenshot showing expired
| Mark Out, Stand-Overs and Location Survey - GMS Disconnection/Reconnection
- GANZ approval of qualification equivalent of
| Mark Out, Stand-Overs and Location Survey- GMS Disconnection/Reconnection
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency.Network Advanced Pressure Control GMS Leakage Response - Grandfather / Equivalent Qualification Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Advanced Pressure ControlGMS Leakage Response AND a copy of eithertheir
- Mito CoC card or MITO database screenshot showing expired
Network Advanced Pressure Control- GMS Leakage Response
- GANZ approval of qualification equivalent of
Network Advanced Pressure Control- GMS Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Gas.Certificate of Competency.Network Operations - Grandfather | The required evidence will be: | Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency.Leakage Survey - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 12507, 12504 (Walking) and/or 12505 (Vehicle)
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network OperationsLeakage Survey AND either a copy of their
- Mito CoC card or MITO database screenshot showing expired
Network Operations- Leakage Survey
- GANZ approval of qualification equivalent
of etwowNetwork Operations- of Leakage Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency. Network Standard Pressure Control - GrandfatherMark Out, Stand-Overs and Location Survey - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 10992, 1955, 20877, 20878 or 5627
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Standard Pressure ControlMark Out, Stand-Overs and Location Survey AND either a copy of their
- Mito CoC card or MITO database screenshot showing expired Network Standard Pressure ControlMark Out, Stand-Overs and Location Survey
- GANZ approval of qualification equivalent of Mark Out, Stand-Overs and Location Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency.Odorant Survey Network Advanced Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant SurveyNetwork Advanced Pressure Control AND a copy of their either
- Mito CoC card or MITO database screenshot showing expired
Odorant Survey- Network Advanced Pressure Control
- GANZ approval of qualification equivalent of Network Advanced Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Certificate of Competency.Odorant Survey – Equivalent QualificationNetwork Operations - Grandfather / Equivalent Qualification | The required evidence will be one of the following: NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level AND Unit Standards: 12507, 20590: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Operations AND a copy of their
- Mito CoC card or MITO database screenshot showing expired Network Operations
- GANZ approval of qualification equivalent
of Odorant Survey
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.Induction.Authorised Restricted Access InductionCertificate of Competency.Network Standard Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Authorised Restricted Access InductionNetwork Standard Pressure Control AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Network Standard Pressure Control
- GANZ approval of qualification equivalent of Network Standard Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
RPL.Complex Pressure Control Certificate of Competency.Odorant Survey - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level AND Unit Standards: 12507, 20590
- Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control Odorant Survey AND a copy of eitherCopy of their
- Mito CoC card or MITO database screenshot showing expired
Complex Pressure Control- Odorant Survey
- GANZ approval of
overseas- qualification equivalent of
Complex Pressure Control
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.RPL.Construct PE Mains - Grandfather / Equivalent QualificationInduction.Authorised Restricted Access Induction | The required evidence will be one of the followingbe: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Main
AND either - Copy of their Mito CoC card or MITO database screenshot showing expired Construct PE Main
- GANZ approval of overseas qualification equivalent of Construct PE Main Authorised Restricted Access Induction
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Gas.RPL.Construct Steel Mains and Services - colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional document showing - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Authorized Restricted Access Induction
| Issue Date= Date application has been proceeded Expiry Date= 2 years following issue date |
|
Gas.Certificate of Competency.Complex Pressure Control - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services
AND - Complex Pressure Control AND a copy of either
- Copy of their Mito CoC card or MITO database screenshot showing expired
Construct Steel Mains and Services- Complex Pressure Control
- GANZ approval of overseas qualification equivalent of
Construct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.RPL.Gas Fitter - GMS Change, Disconnect and/or Reconnect - Certificate of Competency.Construct PE Mains - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains AND a copy of either
- Copy of their Mito CoC card or MITO database screenshot showing
expired - expired Construct PE Mains
- GANZ approval of overseas qualification equivalent of Construct PE Mains
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
RPL.Gas Fitter – Gas Leakage Response on GMS <25m3/hr Equivalent QualificationCertificate of Competency.Construct Steel Mains and Services - Grandfather / Equivalent Qualification
| The required evidence will be one of the following: NZQA Record of Achievement showing completion of the following Qualification: OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services AND a copy of their either
- Mito CoC card or MITO database
screenshot showing expired - screenshot showing expired Construct Steel Mains and Services
- GANZ approval of overseas qualification equivalent of Construct Steel Mains and Services
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.RPL.Network Leakage Response Certificate of Competency.Gas Fitter - GMS Change, Disconnect and/or Reconnect - Equivalent Qualification | The required evidence will be one of the following: NZQA Record of Achievement showing completion of the following Qualification: OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect and/or Reconnect AND a copy of their Mito CoC card or MITO database screenshot showing expired Copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect and/or Reconnect
- GANZ approval of overseas qualification equivalent of Gas Fitter - GMS Change, Disconnect and/or Reconnect
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.RPL.Odorant Survey - Certificate of Competency.Gas Fitter – Gas Leakage Response on GMS <25m3/hr Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter – Gas Leakage Response on GMS <25m3/hr AND a copy of either
- Mito CoC card or MITO database screenshot showing expired Gas Fitter – Gas Leakage Response on GMS <25m3/hr
- GANZ approval of overseas qualification equivalent of Gas Fitter – Gas Leakage Response on GMS <25m3/hr
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|
Gas.RPL.Standard Pressure Control - Certificate of Competency.Network Leakage Response - Grandfather / Equivalent Qualification | The required evidence will be one of the following: - NZQA Record of Achievement showing completion of the following Qualification:
OR - Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of their either
- Mito CoC card or MITO database screenshot showing
expired - expired Network Leakage Response
- GANZ approval of overseas qualification equivalent of Network Leakage Response
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= Assessment Date on Report Expiry Date= Not Required |
|