Versions Compared

Version Old Version 5 New Version Current
Changes made by

Anika McEvoy

Gracielle Molino

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: #11139024

Image RemovedImage Added


Expand
titleAS Course Certificates

Anchor
AScoursecerts
AScoursecerts

CompetencyCompetency RequirementsUpload RequirementsExamples

Welder Certificate AS

17900

1796-2001

–

- No 1

Anchor
wedlercertasno1
wedlercertasno1

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 600 mm outside diameter (single vee welded from both sides). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Anchor
weldercertasno1e
 
weldercertasno1e

Welder Certificate AS

17900

1796-2001

–

- No 1E

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel plate and carbon steel pipe over 270 mm outside diameter (single vee welded from one side only). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
Image Modified

Welder Certificate AS

17900

1796-2001

–

- No 2

Anchor
weldercertasno2
weldercertasno2

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of welds in carbon steel pipe (single vee weld from one side only). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Image Added


Welder Certificate AS

17900

1796-2001

–

- No 3

Anchor
weldercertasno3
weldercertasno3

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of welds in
carbon
  • alloy steel pipe (single vee weld from
one side only
  • both sides). 
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Image Added


Welder Certificate AS

17900

1796-2001

–

- No 3E

Anchor
weldercertasno3e
weldercertasno3e

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of welds using hydrogen controlled electrodes in alloy steel plate and alloy steel pipe over 270 mm outside diameter (single vee weld from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Welder Certificate AS

17900

1796-2001

–

- No 4

Anchor
weldercertasno4
weldercertasno4

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Manual metal-arc welding (MMAW) of weld using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
Image Modified

Welder Certificate AS

17900

1796-2001

–

- No 5

Anchor
weldercertasno5
weldercertasno5

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Gas tungsten-arc welding (GTAW) root run and manual metal-arc welding (MMAW) of welds using hydrogen-controlled electrodes in alloy steel pipe (single vee welded from one side only)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
Image Modified

Welder Certificate AS

17900

1796-2001

–

- No 6

Anchor
weldercertasno6
weldercertasno6

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Gas welding (GW)
(
  • single vee welded from one side only
)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Welder Certificate AS

17900

1796-2001

–

- No 7

Anchor
weldercertasno7
weldercertasno7

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Gas tungsten - arc welding (GTAW)
(
  • single vee welded from one side only
)
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date

Image Added

Image Modified

Welder Certificate AS

17900

1796-2001

–

- No 8F

Anchor
weldercertasno8f
weldercertasno8f

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Flux cored arc welding (FCAW) of plate and pipe
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Welder.Certificate. AS

17900

1796-2001

–

- No 8G

Anchor
weldercertasno8g
weldercertasno8g

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Gas metal - arc welding (GMAW) of plate and pipe
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Welder.Certificate. AS

17900

1796-2001

–

- No 9

Anchor
weldercertasno9
weldercertasno9

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Automatic Welding
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 

Welder Certificate AS

17900

1796-2001

–

- No 10

Anchor
weldercertasno10
weldercertasno10

  • Applicants name must be displayed on evidence and this must match the applicants registered name in Onsite
  • A certificate or card can be accepted
  • Must show completion of Welding Supervisor
  • If card is uploaded, both sides of card should be displayed in uploaded file
  • Evidence must be issued by a registered training organisation (RTO)
  • There must be an indication of the number that the applicant was certified in
  • Black and white or colour copy can be accepted
  • Date of completion shown on the evidence should be recorded in Onsite as the Issue Date
 



Expand
titleTrade Certificates

Anchor
weldingtradecerts
weldingtradecerts

CompetencyCompetency RequirementsUpload RequirementsExamples

Fabrication Metal & Welding.Certificate III.Boilermaking

Anchor
CertIIIBoilermaking
CertIIIBoilermaking


  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Accepted Types

  • Cert III
  • Certificate of Proficiency
  • Certificate of Completion of Apprenticeship

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite
Image AddedImage Added
 

Mechanical.Certificate.Certificate of Proficiency Boilermaker 

Anchor
CertProfBoillermaker
CertProfBoillermaker

  •  Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Accepted Types

  • Cert III
  • Certificate of Proficiency
  • Certificate of Completion of Apprenticeship

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite

Fabrication Metal & Welding.Certificate III.Engineering - Fabrication Trade

Anchor
CertIIIFabricationtrade
CertIIIFabricationtrade

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Accepted Types

  • Cert III
  • Certificate of Proficiency
  • Certificate of Completion of Apprenticeship

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite

Image Added

 

Image Added

Fabrication Metal & Welding.Certificate III.Welder

Anchor
CertIIIWelder
CertIIIWelder

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Accepted Types

  • Cert III
  • Certificate of Proficiency
  • Certificate of Completion of Apprenticeship

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite

Image Added

Image Added

 

Image Added

Fabrication Metal & Welding.Trade.Qualifications - Other

Anchor
TradeOther
TradeOther

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Accepted Types

  • Cert III
  • Certificate of Proficiency
  • Certificate of Completion of Apprenticeship

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite

Mechanical.Certificate.Certificate of Proficiency Welding

Anchor
CertProfWelding
CertProfWelding


  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • Recognised Training Institution name to be displayed on document
  • Actual copy of certificate / degree is required. Letters are not accepted in lieu of this.
  • Course title and associated level to be listed on certificate to match the nominated coding and title within Onsite
 

 

 

 
  • Name and / or signature of issuer to be shown
  • Document / Certificate / Number to be shown
  • Completion date or issue date must be displayed
  • No expiry

Accepted Types

  • Cert III
  • Certificate of Proficiency
  • Certificate of Completion of Apprenticeship

Not Accepted

  • Craft Certificate - needs to be uploaded with SOC
  • The date of completion on the evidence should be recorded as the Issue Date in Onsite


If you have been asked to provide a Statement of Competency please click here for the template and business rules