Page Comparison

• Name on qualification to match the person registered
• Must state PMBWELD301 or PMBWELD301B or equivalent
• Black and white or colour acceptable
• Must be clearly scanned and legible

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

• Name on qualification to match the person registered
• Must state PMBWELD302 or 302A or 302B or equivalent
• Black and white or colour acceptable
• Must be clearly scanned and legible

• Issue Date = Date of completion
• Expiry Date = No expiry date to be entered

Tradesperson.Qualified.Full Day MDG15 Awareness Training (within

3 years)

• Name on certificate to match the person registeredSafe cutting and welding at mines (MDG25) OR MDG25 Full Day Awareness to be listed
• Full Day MDG15 Awareness Training should be shown on the document
• Issued by an RTO / Nationally Recognised Training logo
• TRG - Hot Work (Cutting and Welding) at Mines and Petroleum Sites to be listed
• Issue date must be within the last 3 years
• Black and white or colour is acceptable
• If card is supplied, front and back of the card must be provided.

• Issue date = Date of completion
• Expiry Date = 3 years from the date of issue

Image Removed

• Name on certificate to match the person registered
• TRG - Hot Work (Cutting and Welding) at Mines and Petroleum Sites to be listed
• MDG25 Awareness Training can be accepted
• Issued by an RTO / Nationally Recognised Training logo
• Issue date must be within the last 2 3 yearsNo expiry
• Black and white or colour is acceptable

• Issue date to be recorded

• If card is supplied, front and back of the card must be provided.

• Issue date = Date of completion
• Expiry Date = 3 years from the date of issue