Competency | Competency Requirements | Upload Requirements | Examples |
---|
Health & Safety.Course.Construct Safe Tier 1 | The required evidence will be one of the following: - Copy of email confirming course completion of Construct Safe Tier 1
- Screenshot or website print-out confirming course completion / pass result of Construct Safe Tier 1
- Evidence must show ConstructSafe website URL or email from @constructsafe.co.nz
- Evidence must be valid and in date
- Evidence must show ID number
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Issue Date= As shown on evidence Expiry Date= Not required | | Health & Safety.Course.Health and Safety Representative | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training provider showing completion of Health and Safety Representative Initial or US 29315
- NZQA Record of Achievement showing completion of the following unit standards 29315
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standard achieved must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= As shown on evidence Expiry Date= Not required | | Health & Safety.Course.Manual Handling | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training provider showing completion of Manual Handling
- NZQA Record of Achievement showing completion of the following unit standards 17592
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standard achieved must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
-
Where evidence date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements - Downer Water and Downer Automation sites – All roles: 3 years from completion date
- Downer Power site
- Vestas.Wind Farm role – 2 year refresher from completion date
- All other roles – Non-expiring
An additional certificate or competency card issued from a NZQA accredited training provider showing Manual Handling MUST be provided | Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= Date of training completion Expiry Date= - Downer Water and Downer Automation sites – All roles: 3 years from completion date
- Downer Power site
- Vestas.Wind Farm role – 2 year refresher from completion date
- All other roles – Non-expiring
| | Health & Safety.Course.Plant Isolation & Tagging (25043) | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training provider showing completion of Plant Isolation & Tagging or US 25043
- NZQA Record of Achievement showing completion of the following unit standards 25043
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standard achieved must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence date exceeds 2 years on NZQA record of achievement, certificate or competency card, an additional certificate showing Plant Isolation & Tagging/US 25043 MUST be provided. | Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= Date of training completion Expiry Date= 2 years from completion date | | Health & Safety.Course.Site Safe Passport | The required evidence will be a SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following: - Building Construction
- Civil
- Consultants
- Passport Plus – height
- Passport Plus – tools & Plants
- Passport Plus – Worker Health & Passport Flexi
- Expiry date must be visible and current
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either: - Building Construction
- Civil
- Consultants
- Passport Plus – height
- Passport Plus – tools & Plants
- Passport Plus – Worker Health & Passport Flexi MUST be provided
| Issue Date= Not Required Expiry Date= As shown on the evidence (2 years from issue date) | | Health & Safety.Course.Site Safe Gold Card (Supervisor Passport) | The required evidence will be a SiteSafe Gold Card, screen shot or email from SiteSafe NZ showing any of the following: - Supervisor
- Accident & Investigation
- Risk Management
- Training & Supervising Workers
- Leadership in Safety
- Health & Safety in Construction
- Expiry date must be visible and current
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Colour copy or black and white copy is acceptable
Where completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either: - Supervisor
- Accident & Investigation
- Risk Management
- Training & Supervising Workers
- Leadership in Safety
- Health & Safety in Construction MUST be provided
| Issue Date= Not Required Expiry Date= As shown on the evidence (2 years from issue date) | | Emergency Response.Course.First Aid | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training provider showing completion of a First Aid course. Evidence submitted MUST include the words "First Aid."
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid
- NZQA Record of Achievement showing completion the following unit standards 6401 & 6402
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing 'first aid' MUST be provided | Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= Course completion date Expiry Date= 2 years from course completion date | | First Aid.Course.Transpower First Aid | The evidence will be a: - Certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component”
- Certificate or competency card issued from a NZQA accredited training showing completion of First Aid
- NZQA Record of Achievement showing completion the following unit standards 6401 & 6402
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid
- Issue or expiry date must be clear and visible
- Where assessor / instructor sections are shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and
- Colour copy or black and white copy is acceptable
Where the evidence completion date exceeds 1 year, an additional certificate showing one of the following - Certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component”
- Certificate or competency card issued from a NZQA accredited training showing completion of First Aid
- Screen shot from the EWRB website out showing first aid/CPR MUST be provided
| Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= Course completion date Expiry Date= 1 years from course completion date | | Electrical.Course.Electrical First Aid & CPR | The required evidence will be one of the following: - Certificate or competency card issued from NZ training provider showing completion of a First Aid course. Evidence submitted MUST include the words "CPR"
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid and CPR
- Screenshot of Site Safe Registered Electrical Worker Passport
- Certificate issued by an EWRB approved training provider, showing completion of an ‘Electrical competence course’ or ‘Electrician competency course’ or ‘EWRB competency course’
- NZQA Record of Achievement showing the completion of the following unit standards 6401, 6402
- Evidence must be valid and in date
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
If completion date exceeds 2 years, an additional refresher or course completion evidence will be required, as per list above. Find a competence programme or training provider | Electrical Workers Registration Board (ewrb.govt.nz) | Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= Course completion date Expiry Date= 2 years from course completion date | | Electrical.Course.Electrical Safety &Testing Competence Course | The required evidence will be one of the following: - Certificate or competency card issued from an EWRB (Electrical Workers Registration board) approved training provider showing completion of ‘Electrical Safety & Testing’ or ‘Electrical Competency course’. Providers of this course do not have to be NZQA registered.
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing Electrical Safety & Testing
- NZQA Record of Achievement showing the completion of the following unit standards 29465 or 30658 AND 15852 or 30657
- Evidence must be valid and in date
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Copy must be clear and legible
If completion date exceeds 2 years or has expired, an additional refresher or course completion of either - Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing Electrical Safety & testing
- A certificate or competency card from an EWRB approved training provider showing completion of 'Electrical Safety & Testing' or 'Electrical Competency’ course MUST BE provided
| Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Issue Date= Course completion date
Expiry Date= 2 years from course completion date | | Electrical.Course.Unison First Aid | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training showing completion of a First Aid course. Evidence submitted MUST include the words "First Aid."
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid
- NZQA Record of Achievement showing completion the following unit standards 6401 & 6402
- Date of training completion or date of unit standards achieved must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 1 years, an additional certificate or competency card of one of the following - Certificate or competency card issued from a NZQA accredited training showing completion of First Aid
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid
- NZQA Record of Achievement showing completion the following unit standards 6401 & 6402MUST be provided
| Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
Issue Date= Course completion date
Expiry Date= 14 months from course completion date | | High Risk Work.Course.Use of breathing apparatus | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training showing completion of 25044 or Wear and Operate compressed air breathing apparatus in the workplace
- NZQA Record of Achievement showing completion the following unit standards 25044
- Date of training completion or date of unit standards achieved must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 3 years, an additional certificate or competency card showing 'first aid' MUST be provided | Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= As shown on certificate Expiry Date= 3 years from date of issue | | Hazardous Substances.Certificate.Certified Handler | The required evidence will be one of the following: - Approved Handler or Certified Handler Test Certificate - Certificate Number must be visible
- Compliance Certificate, type Certified handler - Number must be visible
- Issue and expiry date must be visible and current
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Must contain “hazardous Substance and New Organisms Act 1996”
- Certificate or competency card must be issued from a NZQA accredited training
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where completion date exceeds 5 years or has expired, an additional refresher or course completion of either - Approved Handler Test Certificate - Certificate Number must be visible
- Compliance Certificate, type Certified handler - Number must be visible MUST be provided
| Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= As shown on certificate Expiry Date= 5 years from date of issue | | Hazardous Substances.Course.Chlorine Gas Handler 6:1A | The required evidence will be one of the following: - Approved Handler/Certified Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
- Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible
- Issue and expiry date must be visible and current
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Must contain “hazardous Substance and New Organisms Act 1996”
- Certificate or competency card must be issued from a NZQA accredited training
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
If completion date exceeds 5 years or has expired, an additional refresher or course completion of one of the following - Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
- Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible MUST be provided
| Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Issue Date= As shown on certificate Expiry Date= 5 years from date of issue | | Hazardous Substances.Course.Management & Handling of Hazardous Substances 31290 & 31293 | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training provider showing completion of Management and Handling of Hazardous Substances with US 31290 & 31293 or US 20733 & 21467
- NZQA Record of Achievement showing completion the following unit standards 31290 & 31293 or 20733 & 21467
- Date of training completion or date of unit standards achieved must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Must contain “hazardous Substance and New Organisms Act 1996”
- Certificate or competency card must be issued from a NZQA accredited training
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can
| be in colour copy OR black and white copy evidence Not requiredHealth & Safety 3 years from date of issue | | Fire Fighting.Course. | Health and Safety RepresentativeFire Safety and Extinguisher Training | The required evidence will be one of the following: - Certificate or competency card issued from
| a - a NZQA accredited training
| organisation - provider showing completion of
| Health and Safety Representative Initial or US 29315- US 3271 Fire Safety & Extinguisher Training
- NZQA Record of Achievement showing completion of the following unit standards
| 29315- Date of training completion must be visible
- Where assessor / trainer signature section is shown on the evidence,
| this must be completedDate of training completion or date of unit standard achieved visible- completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white
| copy As shown on evidenceDate of Training completion.
Expiry Date = | Not requiredHealth & Safety.Course.Manual Handling2 years from the date of training completion |
| Fire Warden.Trained.Fire Awareness - 3271, 4647 | The required evidence will be one of the following: - Certificate or competency card issued from
| a - a NZQA accredited training
| organisation - provider showing completion of
| Manual Handling- US 3271, 4647
- NZQA Record of Achievement showing completion of the following unit standards
| 17459- Date of training completion must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
| Date of training completion or date of unit standard achieved must be visible- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be
| clear and legibleCan be in colour copy OR black and white copyWhere evidence date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements - Downer Water and Downer Automation – 3 years from completion date
- Downer Power
- Role Vesta.Wind Farm – 2 year refresher from completion date
- All other roles – Non-expiring
An additional certificate or competency card issued from a NZQA accredited training organisation showing Manual Handling MUST be provided training Training completion.
Expiry Date = | Downer Water and Automation All Roles – 3 completion dateDowner Power Vesta.Wind Farm Role – 2 year refresher from completion date All other roles – Non-expiring Health & Safety.Course.Plant Isolation & Tagging (25043)the date of training completion | | Engineering Civil.Course.Understanding NZS3910 | The required evidence will be | one of or competency card issued from a NZQA accredited training organisation showing completion of Plant Isolation & Tagging or US 25043NZQA Record of Achievement showing completion of the following unit standards 25043- issued from NZ Institute of Highway Technology showing course attendance for Understanding NZs3910:2013 Conditions of Contract
- Date of training completion must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
| Date of training completion or date of unit standard achieved must be visible- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be
| clear and legibleCan be in colour copy OR black and white copyWhere the evidence date exceeds 2 years on NZQA record of achievement, certificate or competency card, an additional certificate showing Plant Isolation & Tagging/US 25043 MUST be provided. - clear and legible
- Can be in colour copy OR black and white copy
| Issue Date = Date of | training Training completion. Expiry Date = | 2 years from completion dateHealth & SafetyNon-expiring | | Agriculture.Course. | Site Safe PassportGrowsafe Basic | The required evidence will be a | SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following:Building ConstructionCivilConsultantsPassport Plus – heightPassport Plus – tools & PlantsPassport Plus – Worker Health & Passport Flexi: - Certificate showing “Growsafe Certified” “Basic Certificate”
- The evidence will be issued by a certified Growsafe
- Where chairman / general manager signature section is shown on the evidence, this must be completed
- Expiry date must be visible and current
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
| Colour copy or black and white copy is acceptableWhere completion date exceeds 2 years or it has expired, an additional refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either: Building ConstructionCivilConsultantsPassport Plus – heightPassport Plus – tools & PlantsPassport Plus – Worker Health & Passport Flexi - Can be in colour copy OR black and white copy
Where the evidence completion date exceeds 5 years or has expired, an additional certificate showing - “Growsafe Certified” “Basic Certificate” MUST be provided
| Issue Date= | Not Required5 years previous to expiry date Expiry Date= As | shown on the evidence (2 years from issue date)Health & Safety.Course.Site Safe Supervisor Passport | The required evidence will be a SiteSafe card, screen shot or email from SiteSafe NZ showing any of the following: - Supervisor
- Accident & Investigation
- Risk Management
- Training & Supervising Workers
- Leadership in Safety
- Health & Safety in Construction
per certificate expiry date | | Agriculture.Course.Growsafe Standard | The required evidence will be either a: - Certificate showing “Growsafe Certified” “Standard Certificate”
- Certificate showing “Growsafe Certified” and “Introductory Certificate”
- The evidence MUST be issued by a certified Growsafe
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Expiry date must be visible and current
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
| Colour copy or - Can be in colour copy OR black and white copy
| is acceptableWhere the evidence completion date exceeds | 2 it has expired,an additional | refresher of SiteSafe card, screen shot or email from SiteSafe NZ showing either:SupervisorAccident & InvestigationRisk ManagementTraining & Supervising WorkersLeadership in SafetyHealth & Safety in Construction certificate showing - “Growsafe Certified” “Standard Certificate” MUST be provided
| Issue Date= | Not Required5 years previous to expiry date Expiry Date= As | shown on the evidence (2 years from issue date)Emergency Response.Course.First Aidper certificate expiry date | | Agriculture.Course.Growsafe Registered Chemical Applicator | The required evidence will be | one of the following or competency card issued from a NZQA accredited training showing completion of First AidScreenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid NZQA Record of Achievement showing completion the following unit standards 6401 & 6402Date of training completion or date of unit standards achieved must be visible- showing “Growsafe Certified” “Registered Chemical Applicator”
- The evidence MUST be issued by a certified Growsafe
- Where assessor / trainer signature section is shown on the evidence, this
| must be completed- must be completed
- Expiry date must be visible and current
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence completion date exceeds | 2 showing 'first aid' 5 years or has expired,an additional certificate | or competency card showing - “Growsafe Certified” “Registered Chemical Applicator” MUST be provided
| Issue Date= | Course completion 5 years previous to expiry date Expiry Date= | 2 years from course completion dateFirst Aid.Course.Transpower First Aid | The As per certificate expiry date | | Asbestos.Course.Asbestos Awareness | The required evidence will be a: | Certificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component”- Certificate or competency card issued from a
| NZQA - NZ accredited training organisation showing completion of
| First AidNZQA Record of Achievement showing completion the following unit standards 6401 & 6402Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid Issue or expiry date must be clear and - Date of training completion must be visible
- Where assessor /
| instructor sections are - trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
| Colour copy or - Can be in colour copy OR black and white copy
| is acceptableWhere the evidence completion date exceeds | 1 year, an additional certificate showing one of the followingCertificate showing “Competency course for electrical workers’ or “Competency refresher course for electrical workers’ including Sections “Electrical Component” and “First Aid/CPR component”Certificate Site (business unit) refresher cycle - Downer Corrections & Justice 2 years from course completion date
- An additional certificate or competency card issued from
| a - a NZQA accredited training provider showing
| completion of First AidScreen shot from the EWRB website out showing first aid/CPR MUST be provided 1 years from course completion dateElectrical.Course.Electrical First Aid and CPRDowner Corrections & Justice 2 years from issue date Downer Automation, Defence, Water No expiry date | | Water.Course.Backflow Prevention
| The required evidence will be one of the following: | or competency card a NZQA accredited training organisation - Environmental Training Centre showing completion of
| “Electrical First Aid and CPR”Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid and CPR NZQ - Backflow Prevention Training with US 23847 & 23848
- NZQA Record of Achievement showing
| the - completion of the following unit standards
| 6401, 6402Evidence must be valid and in dateIf - Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standard achieved must be visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Copy must be clear and legibleWhere the evidence completion date exceeds | 2 refresher or course completion of either- Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Electrical First Aid and CPR”
- Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid and CPR MUST be provided
Issue Date= Course completion 2 course completion ElectricalTraffic Management.Course. | Electrical Safety and Testing Competence CourseLevel 1 STMS | The required evidence will be | one of the following:a: - A card / licence showing completion of the qualification called: L1 STMS or L1 STMS R
- Screenshot of "CoPTTM Search" displaying qualification called: L1 STMS or L1 STMS R
- Certificate or competency card issued from a
| NZQA organisation - provider showing completion of
| “Electrical Safety & Testing”Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing Electrical Safety & Testing NZQ Record of Achievement showing the completion of the following unit standards 29465 or 30658 AND 15852 or 30657Evidence must be valid and in dateWhere assessor / trainer signature section is shown on the evidence, this must be completed- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can
| be in colour copy OR black and white copyCopy must be clear and legibleIf completion date exceeds 2 years or has expired, an additional refresher or course completion of either Screenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing Electrical Safety & testingCertificate or competency card issued from a NZQA accredited training organisation showing completion of “Electrical Safety & Testing” - be in colour copy OR black and white copy
Where the evidence has expired, an additional card/licence showing L1 STMS or L1 STMS R MUST be provided | Issue Date = | Course completion As per evidence or 3 years prior to expiry date
Expiry Date = | 2 years from course completion dateElectrical.Course.Unison First AidAs per evidence or 3 years from issue date
| | Traffic Management.Course.Level 2/3 STMS | The required evidence will be | one of the following:a: - A card / licence showing completion of the qualification called: L2/3 STMS or L2/3 STMS R
- Screenshot of "CoPTTM Search" displaying qualification called: L2/3 STMS or L2/3 STMS R
- Certificate or competency card issued from a
| NZQA accredited training showing completion of First AidScreenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid NZQA Record of Achievement showing completion the following unit standards 6401 & 6402Date of training completion or date of unit standards achieved must be visibleWhere assessor / trainer signature section is shown on the evidence, this must be completed- NZTA accredited training provider showing completion of L2/3 STMS or L2/3 STMS R
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence | completion date exceeds 1 yearshas expired, an additional | certificate or competency card of one of the followingCertificate or competency card issued from a NZQA accredited training showing completion of First AidScreenshot from EWRB (Electrical Workers Registration Board) website of Employee Competency Training print out showing First Aid NZQA Record of Achievement showing completion the following unit standards 6401 & 6402card/licence showing L2/3 STMS MUST be provided | Issue Date = | Course completion As per evidence or 3 years prior to expiry date
Expiry Date = | 1 year from course completion dateHigh Risk Work.Course.Use of breathing apparatusAs per evidence or 3 years from issue date | | Traffic Management.Course.Traffic Controller Basic | The required evidence will be | one of the following- Certificate or competency card issued from a NZQA accredited training showing completion of 25044 or Wear and Operate compressed air breathing apparatus in the workplace
- NZQA Record of Achievement showing completion the following unit standards 25044
Date of training completion or date of unit standards achieved must be visibleWhere assessor / trainer signature section is shown on the evidence, this must be completed- A card / licence showing completion of the qualification called: Traffic Control Basic or L1 Basic
- Screenshot of "CoPTTM Search" displaying qualification called: Traffic Control Basic or L1 Basic
- Certificate or competency card issued from a NZTA accredited training provider showing completion of Traffic Control Basic or L1 Basic
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear
| and legibleCan be in colour copy OR black and white copyWhere the evidence completion date exceeds 3 years, an additional certificate or competency card showing 'first aid' MUST be provided Issue Date= As shown on certificate Expiry Date= 3 years from date of issue | Hazardous Substances.Course.Certified Handler | The required evidence will be one of the following: - Approved Handler Test Certificate - Certificate Number must be visible
- Compliance Certificate, type Certified handler - Number must be visible
Issue and expiry date must be visible and currentWhere assessor / trainer signature section is shown on the evidence, this must be completedMust contain “hazardous Substance and New Organisms Act 1996”Certificate or competency card must be issued from a NZQA accredited training- and legible
- Can be in colour copy OR black and white copy
Where the evidence has expired, an additional card/licence showing Traffic control basic or L1 Basic MUST be provided | Issue Date = As per evidence or 3 years prior to expiry date
Expiry Date = As per evidence or 3 years from issue date | | Traffic Management.Course.STMS - Non Practising Cat A + B | The required evidence will be a: - A card / licence showing completion of the qualification called: STMS - Non Practising Cat A + B
- Screenshot of "CoPTTM Search" displaying qualification called: STMS - Non Practising Cat A + B
- Certificate or competency card issued from a NZTA accredited training provider showing completion of STMS - Non Practising Cat A + B
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where | completion date exceeds 5 years or the evidence has expired, an additional | refresher or course completion of either- Approved Handler Test Certificate - Certificate Number must be visible
- Compliance Certificate, type Certified handler - Number must be visible MUST be provided
Issue Date= As shown on certificate Expiry Date= 5 years from date of issue | Hazardous Substances.Course.Chlorine Gas Handler 6:1A | The required evidence will be one of the following: - Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
- Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible
Issue and expiry date must be visible and currentWhere assessor / trainer signature section is shown on the evidence, this must be completedMust contain “hazardous Substance and New Organisms Act 1996”Certificate or competency card must be issued from a NZQA accredited trainingcard, certificate licence showing STMS - Non Practising Cat A + B MUST be provided | Avetta verifiers click here for additional business rule information prior to verification of this competency Issue Date = Not required Expiry Date = As per evidence or 3 years after issue date as stated on evidence | | Traffic Management.Course.STMS - Non Practising Cat C | The required evidence will be a: - A card / licence showing completion of the qualification called: STMS - Non Practising Cat C
- Screenshot of "CoPTTM Search" displaying qualification called: STMS - Non Practising Cat C
- Certificate or competency card issued from a NZTA accredited training provider showing completion of STMS - Non Practising Cat C
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| If completion date exceeds 5 years or Where the evidence has expired, an additional | refresher or course completion of one of the following- Approved Handler Test Certificate – Substances 6.1A Chlorine - Certificate Number must be visible
- Compliance Certificate, Certification details “6.1A Chlorine” - Number must be visible MUST be provided
Issue Date= As shown on certificate Expiry Date= 5 years from date of issue | Hazardous Substances.Course.Management & Handling of Hazardous Substances 31290 & 31293 one of the following:a: - A card / licence showing completion of the qualification called: STMS - Practising Cat A
- Screenshot of "CoPTTM Search" displaying qualification called: STMS - Practising Cat A
- Certificate or competency card issued
| from a NZQA accredited training organisation showing completion of Management and Handling of Hazardous Substances US 31290 & 31293NZQA Record of Achievement showing completion the following unit standards 31290 & 31293Date of training completion or date of unit standards achieved must be visibleWhere assessor / trainer signature section is shown on the evidence, this must be completedMust contain “hazardous Substance and New Organisms Act 1996”Certificate or competency card must be issued from a NZQA accredited training- from a NZTA accredited training provider showing completion of STMS - Practising Cat A
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence | completion date exceeds 3 yearshas expired, an additional | certificate or competency card issued from a NZQA accredited training organisation showingManagement and Handling of Hazardous Substances US 31290 & 31293 MUST be providedIssue Date= As shown on certificate Expiry Date= 3 years from date of issue | Fire Warden.Trained.Fire Awareness US3271, 4647 | The required evidence will be one of the following: - Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 3271, 4647
- NZQA Record of Achievement showing completion of the following unit standards 3271, 464
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Date of training completion or date of unit standard achieved must be visible
Where the evidence completion date exceeds 2 years, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing refresher course completion of US 3271, 4647 MUST be provided | Issue Date = Date of Training completion. Expiry Date = 2 years from the date of training completion | Engineering Civil.Course.Understanding NZS3910 | The required evidence will be the following: - Certificate issued from NZ Institute of Highway Technology showing course attendance for Understanding NZs3910:2013 Conditions of Contract
Date of training completion must be visibleWhere assessor / trainer signature section is shown on the evidence, this must be completedcard, certificate licence showing STMS - Practising Cat A MUST be provided | Avetta verifiers click here for additional business rule information prior to verification of this competency Issue Date = Not required Expiry Date = As per evidence or, if no mention on evidence, 3 years after issue date stated on evidence |
| Traffic Management.Course.STMS - Practising Cat B | The required evidence will be a: - A card / licence showing completion of the qualification called: STMS - Practising Cat B
- Screenshot of "CoPTTM Search" displaying qualification called: STMS - Practising Cat B
- Certificate or competency card issued from a NZTA accredited training provider showing completion of STMS - Practising Cat B
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence has expired, an additional card, certificate licence showing STMS - Practising Cat B MUST be provided | Avetta verifiers click here for additional business rule information prior to verification of this competency Issue Date = | Date of Training completion.Expiry Date = Non-expiring Agriculture.Course.Growsafe BasicNot required Expiry Date = As per evidence or, if no mention on evidence, 3 years after issue date stated on evidence |
| Traffic Management.Course.STMS - Practising Cat C | The required evidence will be a: - A card / licence showing completion of the qualification called: STMS - Practising Cat C
- Screenshot of "CoPTTM Search" displaying qualification called: STMS - Practising Cat C
- Certificate
| showing “Growsafe Certified” “Basic Certificate”The - or competency card issued from a NZTA accredited training provider showing completion of STMS - Practising Cat C
- The required evidence will be issued by
| a certified GrowsafeWhere chairman / general manager signature section is shown on the evidence, this must be completedExpiry date must be visible and current- NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence | completion date exceeds 5 years or has expired, an additional card, certificate | showing“Growsafe Certified” “Basic Certificate” MUST be provided 5 years previous to expiry dateNot required Expiry Date = As per | certificate expiry dateAgricultureevidence or, if no mention on evidence, 3 years after issue date stated on evidence |
| Traffic Management.Course. | Growsafe StandardSTMS - Universal | The required evidence will be | either a:- Certificate showing “Growsafe Certified” “Standard Certificate”
- Certificate showing “Growsafe Certified” and “Introductory Certificate”
The evidence MUST be issued by a certified GrowsafeWhere assessor / trainer signature section is shown on the evidence, this must be completedExpiry date must be visible and currenta: - A card / licence showing completion of the qualification called: STMS - Universal
- Screenshot of "CoPTTM Search" displaying qualification called: STMS - Universal
- Certificate or competency card issued from a NZTA accredited training provider showing completion of STMS - Universal
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence | completion date exceeds 5 years or has expired, an additional | certificate showing “Growsafe Certified” “Standard Certificate” MUST be provided 5 years previous to expiry dateAs per evidence Expiry Date = | As per certificate expiry dateAgriculture.Document.Growsafe - Registered Chemical Applicator | The required evidence will be a: - Certificate showing “Growsafe Certified” “Registered Chemical Applicator”
The evidence MUST be issued by a certified GrowsafeWhere assessor / trainer signature section is shown on the evidence, this must be completedExpiry date must be visible and currentNon-expiring |
| Traffic Management.Course.TMO - Non Practising Anchor |
---|
| tmononpractising |
---|
| tmononpractising |
---|
|
| The required evidence will be a: - A card / licence showing completion of the qualification called: TMO - Non Practising
- Screenshot of "CoPTTM Search" displaying qualification called: TMO - Non Practising
- Certificate or competency card issued from a NZTA accredited training provider showing completion of TMO - Non Practising
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence | completion date exceeds 5 years or has expired, an additional | certificate showing “Growsafe Certified” “Registered Chemical Applicator” 5 years previous to expiry dateNot required Expiry Date = As per | certificate expiry dateAsbestos.Course.Asbestos Awarenessevidence or, if no mention on evidence, 3 years after issue date stated on evidence | | Traffic Management.Course.TMO - Practising | The required evidence will be a: - A card / licence showing completion of the qualification called: TMO - Practising
- Screenshot of "CoPTTM Search" displaying qualification called: TMO - Practising
- Certificate or competency card issued from
| a NZQA - a NZTA accredited training
| organisation - provider showing completion of
| Asbestos AwarenessDate of training completion must be visibleWhere assessor / trainer signature section is shown on the evidence, this must be completed- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date OR expiry date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence | completion date exceeds Site (business unit) refresher cycle- Downer Corrections & Justice 2 years from course completion date
- An additional certificate or competency card issued from a NZQA accredited training organisation showing Course Completion of Asbestos Awareness MUST be provided.
- Downer Automation, Downer Defence, Downer Water NO expiry date
- No additional certificate required
Issue Date= Course completion date Expiry Date= Downer Corrections & Justice 2 years from issue date Downer Automation, Defence, Water No expiry date | Water.Course.Backflow Prevention The required evidence will be one of the following: - Certificate issued from Environmental Training Centre showing completion of Backflow Prevention Training with US 23847 & 23848
- NZQA Record of Achievement showing completion of the following unit standards 23847 & 23848
Where assessor / trainer signature section is shown on the evidence, this must be completedDate of training completion or date of unit standard achieved must be visiblehas expired, an additional card, certificate licence showing TMO - Practising MUST be provided | Avetta verifiers click here for additional business rule information prior to verification of this competency Issue Date = As per evidence or 3 years prior to expiry date Expiry Date = As per evidence or, if no mention on evidence, 3 years after issue date stated on evidence |
| Traffic Management.Course.TTM Worker | The required evidence will be a: - A card / licence showing completion of the qualification called: TTM - Worker
- Screenshot of "CoPTTM Search" displaying qualification called: TTM - Worker
- Certificate or competency card issued from a NZTA accredited training provider showing completion of TTM - Worker
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
- Issue date must be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Where the evidence completion date exceeds 3 years, an additional certificate from Environmental Training Centre showing completion of Backflow Prevention Training with US 23847 & 23848 MUST be providedIssue dateNot required Expiry Date = | 3 years from issue dateNon expiring |
| Traffic Management.Course. | Level 1 STMSTTM - Planner | The required evidence will be a: - A card / licence showing completion of the qualification called:
| L1 STMS- TTM - Planner
- Screenshot of "CoPTTM Search" displaying qualification called:
| L1 STMS- TTM - Planner
- Certificate or competency card issued from a NZTA accredited training provider showing completion of TTM - Planner
- The required evidence will be issued by NZ Transport Agency, an accredited training provider or https://copttm.nzta.govt.nz/publicsearch.jsp
| Expiry - Issue OR expiry date must
| be - be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
| Where the evidence has expired, an additional card/licence showing L1 STMS MUST be provided Not RequiredAs per evidence or 3 years prior to expiry date
Expiry Date = As per evidence or 3 years from issue date |
| Traffic Management.Course. | Level 2/3 STMSTraffic Inspection | The required evidence will be a: - A card / licence showing completion of the qualification called:
| L2/3 STMS- Traffic Inspection or Traffic Inspector or Inspector
- Screenshot of "CoPTTM Search" displaying qualification called:
| L2/3 STMS- Traffic Inspection or Inspector
- Certificate or competency card issued from a NZTA accredited training provider showing completion of Traffic Inspection or Traffic Inspector
- The required evidence will be issued by NZ Transport Agency
| or Expiry - Issue date OR expiry date must
| be - be clear and visible
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
Where the evidence has expired, an additional card | /, certificate licence showing | L2/3 STMS Traffic Inspection MUST be provided | Issue Date = Not | Required Date Date = As per evidence or, if no mention on evidence |
Traffic Management.Course.Traffic Controller Basic | The required , 3 years after issue date stated on evidence |
| Electrical.Certificate.Work Party Supervision | The evidence will be | aExpiry date must be clear and visible - A card / licence showing completion of the qualification called: Traffic Control Basic
- Screenshot of "CoPTTM Search" displaying qualification called: Traffic Control Basic
The required evidence will be issued by NZ Transport Agency or https://copttm.nzta.govt.nz/publicsearch.jsp - Certificate or competency card issued from a NZQA accredited training provider showing course completion of Work Party Supervision
- Assessment Completion date must be visible
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
| Can be in colour copy OR - Colour copy or black and white copy is acceptable
Where the evidence | has expiredcompletion date exceeds 1 year, an additional | card/licence showing Traffic control basic Not Required Date of assessment completion
Expiry Date= | As per evidenceTraffic Management.Course.TTM Planner | The required evidence will be a: - A card / licence showing completion of the qualification called: TTM
- Screenshot of "CoPTTM Search" displaying qualification called: TTM
The required evidence will be issued by NZ Transport Agency or https://copttm.nzta.govt.nz/publicsearch.jsp Expiry date must be clear and visible 1 year from issue date | | Electrical.Endorsement.Safety Supervisor (SSA) | The evidence will be one of the following: - Downer Document for Safety Supervisor Assessment
- Form – 210F002 Powerco Document for Safety Supervisor
- Assessment Completion date must be visible
- All sections must be completed
- Where assessor / trainer signature section is shown on the evidence, this must be completed
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Copy must be clear and legible
| Can be in colour copy OR - Colour copy or black and white copy is acceptable
Where the evidence | has expired, completion date exceeds 2 years, an additional | card/licence showing TTM certificate showing Attendance for “Safety Supervisor” MUST be provided | Issue Date= | Not Required Date of assessment completion
Expiry Date= | As per evidence
|