Competency | Competency Requirements | Upload Requirements | Examples |
---|
High Risk Work.Unit Standard.17309 - Operate a wheeled loader on infrastructure works sites | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which
|
which - is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard.1737 - Drive a heavy vehicle on unsealed road surfaces |
Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.1738 - Drive a heavy vehicle in an off-road environment | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.17599 - Plan a confined space entry | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.17976 - DKO operating a light 4WD vehicle in an off-road environment Anchor |
---|
unit2 | unit2 | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
17978 Operate light 4WD heavy vehicle in an off-road environment |
Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.18037 - Plan a confined space entry in the electricity supply industry | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.18272 - Operate a mobile elevating work platform (MEWP) in the ESI | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.18426 - DKO hazards associated with confined spaces
Anchor |
---|
unit3 | unit3The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
19207 Work in in the infrastructure industryIssue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.20875 - DKO slinging, lifting, moving, and placing loads using mobile plant | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.22279 - Operate a skid steer on infrastructure works sites | Issue Date = Credit entry | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
23232 Develop a rescue plan for recovery of a suspended individual after a fallIssue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.23962 - Self-propelled Boom Lift Elevating Work Platform (EWP) | Issue DKO operating a light 4WD vehicle in an off-road environment |
unit4 | unit4 | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP) | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP) | | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP) Anchor |
---|
unit5 | unit5 | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP) | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use | Issue Date = 17978 - Operate a light 4WD vehicle in an off-road environment | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
24553 Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervisionIssue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24556 - DKO the safe operation of a light utility vehicle (LUV)
Anchor |
---|
unit6 | unit6 | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safePlan a confined space entry in the electricity supply industry | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
30072 - Demonstrate and apply knowledge of slinging regular loads safely Anchor |
---|
unit7 | unit7 | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.3789 - Sling varied regular loads and safely direct a crane during crane operations18272 - Operate a mobile elevating work platform (MEWP) in the ESI | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
6916 the rules relating to chainsaw useIssue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.6917 - Demonstrate basic chainsaw operation
Anchor |
---|
unit8 | unit8 | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.15757 - Use, install & disestablish temporary proprietary height safety systems | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.23229 - Use safety harness system when working at height | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Qualified.Previously hold crane operation unit standard | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.21467 - Store and handle workplace chemicals
Anchor |
---|
unit9 | unit9 | hazards associated with confined spaces | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
20733 - Knowledge of safe storage and handling of hazardous substances in the workplaceIssue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24559 - Operate a quad bike on rolling terrain
Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment
Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24561 - Operate a quad bike with trailed equipment
Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.31290 - Knowledge of safe management and potential adverse effects of hazardous substances
Anchor |
---|
unit10 | unit1019207 - Work in a confined space in the infrastructure industry | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
|
High Risk Work.Unit Standard. |
31293 - Safe handling, storage, and disposal of hazardous substances in the workplaceIssue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.3800 - Use a radio remote or pendant controlled gantry crane to lift and place regular loads | Issue Date = Credit Result date
Expiry Date = Not RequiredCrane Vehicle Loader.Unit Standard.16617 - Use a truck loader crane to lift & place regular loads | Issue Date = Credit Result date
Expiry Date = Not RequiredHeavy Vehicle.Unit Standard.10851 - Operate a powered industrial lift truck (forklift)
Anchor |
---|
unit11 | unit11 | Issue Date = Credit Result date
Expiry Date = Not RequiredHeavy Vehicle.Unit Standard.16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)20875 - DKO slinging, lifting, moving, and placing loads using mobile plant | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
Heavy Vehicle
|
High Risk Work.Unit Standard. |
16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)Issue Date = Credit Result date
Expiry Date = Not RequiredHeavy Vehicle.Unit Standard.16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks) | Issue Date = Credit Result date
Expiry Date = Not RequiredHeavy Vehicle.Unit Standard.17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence | 22279 - Operate a skid steer on infrastructure works sites | The required evidence will be either: - NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*
OR - Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
- Must state "unit standard achieved"
- 'Unit standards aligned' is not acceptable
- Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
- Date of unit standards achieved must be visible
- Copy must be clear and legible
- Can be in colour copy OR black and white copy
- Avetta Administrators to click here for instructions on checking NZQA Accredited Providers
| Avetta verifiers click here for additional business rule information prior to verification of this competency
Issue Date = Credit Result date
Expiry Date = Not Required |
Heavy Vehicle
|
High Risk Work.Unit Standard. |
18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24554 - Operate a quad bike on flat terrain
Anchor |
---|
Unit 11a | Unit 11a | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24557 - DKO the safe operation of a quad bike | Issue Date = Credit Result date
Expiry Date = Not RequiredHigh Risk Work.Unit Standard.24563 - Operate a quad bike with mounted equipment or load