Page Comparison

The required evidence will be one of the following: 

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of either 
    • • • Mito CoC card or MITO database screenshot showing expired Standard Pressure control
        • GANZ approval of qualification equivalent of Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.11 Complex Pressure Control

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US 30384, 30385

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control AND a copy of either 
    • • • Mito CoC card or MITO database screenshot showing expired Complex Pressure control
        • GANZ approval of qualification equivalent of Complex Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.12 Network Leakage Response

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

AND   NZQA Record of Achievement showing completion of the following unit standards:  US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Network Leakage Response
        • GANZ approval of qualification equivalent of Network Leakage Response

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

AND   NZQA Record of Achievement showing completion of the following unit standards: US30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect, and/or Reconnect
        • GANZ approval of qualification equivalent of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr  AND   NZQA Record of Achievement showing completion of the following unit standards:  US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Gas Fitter - Gas Leakage Response on GMS <25m3/hr
        • GANZ approval of qualification equivalent of Gas Fitter - Gas Leakage Response on GMS <25m3/hr

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.2 Safety Induction

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US497, 17593, 32105

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Safety Induction
        • GANZ approval of qualification equivalent of Safety Induction

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.3 Safe Working

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

AND   NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Safe Working
        • GANZ approval of qualification equivalent of Safe Working

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.4 Gas Foundation

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Gas Foundation
        • GANZ approval of qualification equivalent of Safe Working

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Replace GMS <25m3/hour 
        • GANZ approval of qualification equivalent of GMS <25m3/hour

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour training

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.6 PE Pipelaying Only

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10995, US10988, 11328, 20869, 20877, 20878, 23086, 25610, 30380, 31448, 32035

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipelaying Only AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired PE Pipelaying Only
        • GANZ approval of qualification equivalent of PE Pipelaying Only

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of SPE Pipelaying Only 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.7 Construct PE Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10975, 10981, 10988, 23086, 25610, 30382, 31448, 32035, 32336, 32332, 32338

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Construct PE Services
        • GANZ approval of qualification equivalent of Construct PE Services

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Services 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.8 Construct PE Mains

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains

AND   NZQA Record of Achievement showing completion of the following unit standards: US30371, 30374, 30377, 32335, 32339

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Construct PE Mains
        • GANZ approval of qualification equivalent of Construct PE Mains

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services

AND   NZQA Record of Achievement showing completion of the following unit standards: US9550, 10982, 10984, 10993, 32036, 32337

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Construct Steel Mains and Services
        • GANZ approval of qualification equivalent of Construct Steel Mains and Services

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E1 PE Pipe Jointing Electro Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10980

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired PE Pipe Jointing Electro Fusion
        • GANZ approval of qualification equivalent of PE Pipe Jointing Electro Fusion

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing Electro Fusion 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E10 Leakage Survey (Walking)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking) 

AND   NZQA Record of Achievement showing completion of the following unit standards: US32330

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking) AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Leakage Survey (Walking)
        • GANZ approval of qualification equivalent of  Leakage Survey (Walking)

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Walking)

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E11 Leakage Survey (Vehicle)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training

AND   NZQA Record of Achievement showing completion of the following unit standards: US32331

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Standard Pressure control
        • GANZ approval of qualification equivalent of Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey (Vehicle) training

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits

AND   NZQA Record of Achievement showing completion of the following unit standards:  US17590

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Issue Work Permits
        • GANZ approval of qualification equivalent of Issue Work Permits

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Issue Work Permits

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion  

AND   NZQA Record of Achievement showing completion of the following unit standards: US10987

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired PE Pipe Jointing - Butt Fusion 
        • GANZ approval of qualification equivalent of PE Pipe Jointing - Butt Fusion 

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of PE Pipe Jointing - Butt Fusion 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E3 Hydrostatic Testing

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing  

AND   NZQA Record of Achievement showing completion of the following unit standards: US10972

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing  AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Hydrostatic Testing control
        • GANZ approval of qualification equivalent of Hydrostatic Testing control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hydrostatic Testing 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E4 Hot Tap Steel Pipe

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe  

AND   NZQA Record of Achievement showing completion of the following unit standards: US10983

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Hot Tap Steel Pipe 
        • GANZ approval of qualification equivalent of Hot Tap Steel Pipe 

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Hot Tap Steel Pipe 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points

AND   NZQA Record of Achievement showing completion of the following unit standards: US12509

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Install CP Test Points
        • GANZ approval of qualification equivalent of Install CP Test Points

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Install CP Test Points 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E6 Odorant Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey 

AND   NZQA Record of Achievement showing completion of the following unit standards: US 20590

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey AND a copy of either either
    • • • Mito CoC card or MITO database screenshot showing expired Odorant Survey 
        • GANZ approval of qualification equivalent of Odorant Survey

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey  

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E7 Cathodic Protection Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey 

AND   NZQA Record of Achievement showing completion of the following unit standards: US32036, 32037

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey AND a copy of either 
    • • • Mito CoC card or MITO database screenshot showing expired Cathodic Protection Survey 
        • GANZ approval of qualification equivalent of Cathodic Protection Survey

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Cathodic Protection Survey 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E8 Mark-outs & Standovers

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers

AND   NZQA Record of Achievement showing completion of the following unit standards: US30379

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers AND a copy of either 
    • • Mito CoC card or MITO database screenshot showing expired Mark-outs & Standovers
      • GANZ approval of qualification equivalent of Mark-outs & Standovers

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark-outs & Standovers

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance 

AND   NZQA Record of Achievement showing completion of the following unit standards: US12518

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance AND a copy of either 
    • • • Mito CoC card or MITO database screenshot showing expired Valve Maintenance 
        • GANZ approval of qualification equivalent of Valve Maintenance 

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Valve Maintenance 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.Construction Service Laying – of Mains and Services - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construction Service Laying of Mains and Services AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Construction Service Layingof Mains and Services
        • GANZ approval of qualification equivalent of Construction Service Layingof Mains and Services

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Construction of Mains and Services Pipelaying - Grandfather / Equivalent Qualification

The required evidence will be :

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construction of Mains and ServicesPipelaying  AND a copy of either
    • • • Mito CoC card or MITO database screenshot showing expired Construction of Mains and ServicesPipelaying
        • GANZ approval of qualification equivalent of Construction of Mains and ServicesPipelaying

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Construction Pipelaying Service Laying - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• • NZQA Record of Achievement showing completion of the following Qualification:  National Certificate in Gas Networks Construction Service Laying Level 3

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construction Pipelaying Service Laying AND a copy of either
    • • • • Mito CoC card or MITO database screenshot showing expired Construction
        Pipelaying
        • • Service Laying
          • GANZ approval of qualification equivalent of Construction
        Pipelaying
        • • Service Laying

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date= Assessment Date on Report

Expiry Date= Not Required

The required evidence will be

:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of

• • Cathodic Pressure (CP) Survey AND a copy of either
    • • • • Mito CoC card or MITO database screenshot showing expired

• • • • • • Cathodic Pressure (CP) Survey
          • GANZ approval of qualification equivalent of

• • • • • • Cathodic Pressure (CP) Survey

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.

GMS Disconnection/Reconnection - Grandfather / Equivalent Qualification

The required evidence will be:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of

• • GMS Disconnection/Reconnection AND a copy of either
    • • • • Mito CoC card or MITO database screenshot showing expired

• • • • • • GMS Disconnection/Reconnection
          • GANZ approval of qualification equivalent of

• • • • • • GMS Disconnection/Reconnection

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.GMS

Leakage Response - Grandfather / Equivalent Qualification

The required evidence will be:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of GMS

• • Leakage Response AND a copy of

• • their
    • • • • Mito CoC card or MITO database screenshot showing expired GMS

• • • • • • Leakage Response
          • GANZ approval of qualification equivalent of GMS

• • • • • • Leakage Response

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.GMS Leakage Response Survey - Grandfather / Equivalent Qualification

The required evidence will be :

one of the following:

• •  NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level 2 AND Unit Standards: 12507, 12504 (Walking) and/or 12505 (Vehicle)

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Survey AND either a copy of
    • • • • Mito CoC card or MITO database screenshot showing expired GMS Leakage ResponseSurvey
          • GANZ approval of qualification equivalent of GMS Leakage ResponseSurvey

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date= Assessment Date on Report

Expiry Date= Not Required

The required evidence will be one of the following:

• •  NZQA Record of Achievement showing completion of the following Qualification:  National Certificate in Gas Industry Level 2 AND Unit Standards: 12507, 12504 (Walking) and/or 12505 (Vehicle)10992, 1955, 20877, 20878 or 5627

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Leakage Mark Out, Stand-Overs and Location Survey  AND either a copy of
    • • • • • Mito CoC card or MITO database screenshot showing expired
          Leakage Survey
          • • Mark Out, Stand-Overs and Location Survey 
            • GANZ approval of qualification equivalent of
          Leakage
          • • Mark Out, Stand-Overs and Location Survey

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Mark Out, Stand-Overs and Location Survey – Network Advanced Pressure Control - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• •  NZQA Record of Achievement showing completion of the following Qualification:  National Certificate in Gas Industry Level 2 AND Unit Standards: 10992, 1955, 20877, 20878 or 5627

:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Mark Out, Stand-Overs and Location Survey Network Advanced Pressure Control AND either a copy of either
    • • • • • Mito CoC card or MITO database screenshot showing expired Mark Out, Stand-Overs and Location Survey Network Advanced Pressure Control
            • GANZ approval of qualification equivalent of Mark Out, Stand-Overs and Location SurveyNetwork Advanced Pressure Control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Network Advanced Pressure Control Operations - Grandfather / Equivalent Qualification 

The required evidence will be:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Advanced Pressure ControlOperations AND a copy of eithertheir
    • • • • • Mito CoC card or MITO database screenshot showing expired Network Advanced Pressure ControlOperations
            • GANZ approval of qualification equivalent of of  Network Advanced Pressure ControlOperations

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Network Operations Standard Pressure Control - Grandfather / Equivalent Qualification 

The required evidence will be:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network OperationsStandard Pressure Control AND a copy of their either
    • • • • • Mito CoC card or MITO database screenshot showing expired Network OperationsStandard Pressure Control
            • GANZ approval of qualification equivalent of  of Network OperationsStandard Pressure Control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

The required evidence will be one of the following:

• • NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level AND Unit Standards: 12507, 20590
  • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Standard Pressure ControlOdorant Survey AND a copy of either
    • • • • • • Mito CoC card or MITO database screenshot showing expired
            Network Standard Pressure Control
            • • Odorant Survey
              • GANZ approval of qualification equivalent of
            Network Standard Pressure Control
            • • Odorant Survey

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy
• Avetta Administrators to click here for instructions on checking NZQA Accredited Providers

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Odorant Survey - Grandfather / Equivalent QualificationInduction.Authorised Restricted Access Induction

The required evidence will be one of the following:

• • NZQA Record of Achievement showing completion of the following Qualification: National Certificate in Gas Industry Level AND Unit Standards: 12507, 20590Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Odorant Survey AND a copy of either
    • • • • • • Mito CoC card or MITO database screenshot showing expired Odorant Survey
              • GANZ approval of qualification equivalent of Odorant Survey
Where assessor / trainer
• •  Authorised Restricted Access Induction

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Gas.Induction.Authorised Restricted Access Induction

The required evidence will be:Where the evidence completion date exceeds 3 years, an additional document showing 

Gas.Certificate of Competency.Construct PE Mains - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct PE Mains  AND a copy of either
    • • • • • • Copy of their Mito CoC card or MITO database screenshot showing expired Construct PE Mains
              • GANZ approval of overseas qualification equivalent of Construct PE Mains

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
Can be in colour copy OR black and white copy
• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or
  "tick" of  Authorised Restricted Access Induction

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Gas.Certificate of Competency.Complex Pressure Control - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control  AND a copy of either

• • • • • • • • Copy of their Mito CoC card or MITO database screenshot showing expired Complex Pressure Control
              • GANZ approval of overseas qualification equivalent of Complex Pressure Control 
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

• • "tick" of Authorized Restricted Access Induction 

Issue Date= Date application has been proceeded

Expiry Date= 2 years following issue date

Gas.Certificate of Competency.Construct Steel Mains and Services Complex Pressure Control - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Construct Steel Mains and Services Complex Pressure Control  AND a copy of either

• • • • • • • • Copy of their Mito CoC card or MITO database screenshot showing expired
  Construct Steel Mains and Services
  • • • • • • • Complex Pressure Control
              • GANZ approval of overseas qualification equivalent of
  Construct Steel Mains and Services
  • • • • • • • Complex Pressure Control 
• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Gas Fitter - GMS Change, Disconnect and/or Reconnect Construct PE Mains - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect and/or ReconnectConstruct PE Mains  AND a Copy copy of either
    • • • • • • Copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect and/or Reconnect Construct PE Mains
              • GANZ approval of overseas qualification equivalent of Gas Fitter - GMS Change, Disconnect and/or Reconnect Construct PE Mains

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter – Gas Leakage Response on GMS <25m3/hr Construct Steel Mains and Services AND a copy of either
    • • • • • • Mito CoC card or MITO database screenshot showing expired Gas Fitter – Gas Leakage Response on GMS <25m3/hrConstruct Steel Mains and Services
              • GANZ approval of overseas qualification equivalent of Gas Fitter – Gas Leakage Response on GMS <25m3/hrConstruct Steel Mains and Services

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.Certificate of Competency.Network Leakage Response - Grandfather / Gas Fitter - GMS Change, Disconnect and/or Reconnect - Equivalent Qualification

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage ResponseGas Fitter - GMS Change, Disconnect and/or Reconnect AND a copy Copy of either
    • • • • • • Mito CoC card or MITO database screenshot showing expired Network Leakage ResponseGas Fitter - GMS Change, Disconnect and/or Reconnect 
              • GANZ approval of overseas qualification equivalent of Network Leakage Response qualification equivalent of Gas Fitter - GMS Change, Disconnect and/or Reconnect 

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.RPL.Odorant Survey - Certificate of Competency.Gas Fitter – Gas Leakage Response on GMS <25m3/hr Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• •  NZQA Record of Achievement showing completion of the following Qualification: 

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter – Gas Leakage Response on GMS <25m3/hr AND a copy of either
    • • • • • • Mito CoC card or MITO database screenshot showing expired Gas Fitter – Gas Leakage Response on GMS <25m3/hr
              • GANZ approval of overseas qualification equivalent of Gas Fitter – Gas Leakage Response on GMS <25m3/hr

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required

Gas.RPL.Standard Pressure Control - Certificate of Competency.Network Leakage Response - Grandfather / Equivalent Qualification

The required evidence will be one of the following:

• •  NZQA Record of Achievement showing completion of the following Qualification: 

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of their either
    • • • • • • Mito CoC card or MITO database screenshot showing
    expired 
    • • • • • • expired Network Leakage Response
              • GANZ approval of overseas qualification equivalent of Network Leakage Response

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Issue Date= Assessment Date on Report

Expiry Date= Not Required