Page Comparison

Expand

title	Carpentry

Anchor

	YaraCarpentry
	YaraCarpentry

Competency	Competency Requirements	Upload Requirements	Examples

International Welding Inspector Certification

Carpenter.Certificate III.

Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Must be issued by an RTO or Australian Government Appointed Authority
Actual copy of document is required.
Course title and associated level to be listed on document
Accepted examples of course titles to be displayed:

Document musts demonstrate competency to:

a. (IWI S) Aust. (CSWI),
b. UK (CSWIP 3.2)
c. SA (SAIW)
d. NZ (CBIP)

Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia

- Carpentry and Joinery
- Carpentry
- Carpentry and/or Formsetting
Accepted document types include
- Completion of Trade
- Completion of Apprenticeship
- Certificate of Proficiency
- Trade Certificate
- Certificate of Completion
- Certificate of Qualification
- Certificate III
- Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval

Document / Certificate / Number to be listed
Black and white or colour is acceptable
Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

Issue Date to be recorded as shown on document

Expand

title	E&I Technicians

Anchor

	YaraEandI
	YaraEandI

Competency

Competency Requirements

Upload Requirements

Examples

Electrical Instrumentation.Certificate III.E&I Technicians

Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Must be issued by an RTO or Australian Government Appointed Authority
Actual copy of document is required.
Course title and associated level to be listed on certificate
Accepted examples of course titles/codes to be displayed:
- Electrotechnology Electrician
- Electrical Mechanic
- Electrical & Instrumentation
Accepted document types include
- Certificate III

Note: other equivalent competency codes may be accepted with Yara approval.

Document / Certificate / Number to be listed
Black and white or colour is acceptable
Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for

an

an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment.

Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

To be deemed valid the request shall be:

Documented on Yara’s Training & Competency Exemption Form [TRG-YP-FRM-125-09]
Participant details to match applicant
Course Code and Title to match
Shall be ‘approved’
Issue date: Use date of issue
Expire date: As listed on the form
Shall have approver role, name and signature.

Avetta verifier

Please click here for the template and business rules.

Issue Date to be recorded as shown on document

Electrical Instrumentation.Certificate IV.E&I Technicians

Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Must be issued by an RTO or Australian Government Appointed Authority
Actual copy of document is required.
Course title and associated level to be listed on certificate
Accepted examples of course titles/codes to be displayed:
- UEE40407
- UEE40410
- UEE40411
- UEE40420
Accepted document types include:
- Completion of Trade
- Completion of Apprenticeship
- Certificate of Proficiency
- Trade Certificate
- Certificate of Completion
- Certificate of Qualification
- Certificate IV
- Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval.

Document / Certificate / Number to be listed
Black and white or colour is acceptable
Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

Issue Date to be

entered as date of training completion

Expiry date as displayed on certificate. If no expiry date then no date to be entered

recorded as shown on document

Image Added

Expand

title	Inspection

Anchor

	YaraInspection
	YaraInspection

Competency

Competency Requirements

Upload Requirements

Examples

External.Certificate.EXT067 Inspection Certification

Inspector.Certificate.(AICIP, API, ASME, NACE, AWS, CSWIP or TWI) - Inspection Certification

Inspector.Certificate.NACEINSPL1 - Inspection Certification

Name on document to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Certificate will demonstrate Inspector Accreditation
Document musts demonstrate competency to NACEINSPL1 (AICIP, API, ASME, NACE, AWS, CSWIP or TWI)
Black and white or colour is acceptable
Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for

an

an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment.

Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

To be deemed valid the request shall be:

Documented on Yara’s Training & Competency Exemption Form [TRG-YP-FRM-125-09]
Participant details to match applicant
Course Code and Title to match
Shall be ‘approved’
Issue date: Use date of issue
Expire date: As listed on the form
Shall have approver role, name and signature.

Avetta verifier click here for additional business rule prior to verification of this competency

Please click here for the template and business rules.

Issue Date to be entered as date of training completion
Expiry date as displayed on certificate. If no expiry date then 3 years from issue date.

Weighbridge Operators

Expand

title	Mechanical

Anchor

	YaraMechanical
	YaraMechanical

Competency	Competency Requirements	Upload Requirements	Examples
Mechanical.Certificate IV.Mechanical Technicians	Name on

certificate

document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)

Certificate must indicate completion of Weighbridge Operator

Must be

Issued by an RTO with Nationally Recognised Training logo

issued by an RTO or Australian Government Appointed Authority
Actual copy of document is required.
Course title and associated level to be listed on certificate
Accepted examples of course titles to be displayed:
- Engineering - Mechanical Trade
- Engineering - Mechanical Trade (Fitting/machining)
- Engineering Tradesperson (Mechanical) (Fitting)
- Diesel Fitting
- Diesel Fitting ( Pathway )
- Mechanical Fitter
- Mechanical Trade (Maintenance) - Fitting and / or Turning Pathway
- Fitter and Turner or Mechanical
- Fitter and Machinist
- MEM30219 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
NOT accepted examples of course titles to be displayed:
- Motor or Automotive Mechanic
Accepted document types include
- Completion of Trade
- Completion of Apprenticeship
- Certificate of Proficiency
- Trade Certificate
- Certificate of Completion
- Certificate of Qualification
- Certificate IV
- Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval.

Document / Certificate / Number to be listed
Black and white or colour is acceptable
Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for

an

an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment.

Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

To be deemed valid the request shall be:

Documented on Yara’s Training & Competency Exemption Form [TRG-YP-FRM-125-09]
Participant details to match applicant
Course Code and Title to match
Shall be ‘approved’
Issue date: Use date of issue
Expire date: As listed on the form
Shall have approver role, name and signature.

Avetta verifier click here for additional business rule prior to verification of this competency

Issue Date to be entered as date of training completion
No expiry

All other Trade Qualification CertificatesClick here to be re-directed to the Avetta National Business Rules for Trade Qualifications

Please click here for the template and business rules.

Avetta staff click here for additional business rule information prior to file verification

Issue Date to be recorded as shown on document

Mechanic.Certificate.Heavy Duty Motor Mechanic

Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Must be issued by an RTO with Nationally Recognised Training logo
Actual copy of document is required.
Course title and associated level to be listed on certificate
Accepted examples of course titles to be displayed:
- Heavy Duty Diesel Fitter
- Automotive Mechanical – Heavy Vehicle Road Transport
- Mobile Plant Mechanic
- Heavy Duty or Motor Mechanic
- Heavy Diesel Mechanic
Accepted document types include:
- Completion of Trade
- Completion of Apprenticeship
- Certificate of Proficiency
- Trade Certificate
- Certificate of Completion
- Certificate of Qualification
- Certificate III
- Australian Recognised Trade Certificate

Note: other equivalent competencies may be accepted with Yara approval.

Document / Certificate / Number to be listed
Black and white or colour is acceptable
Scanned document to be clearly legible

Issue Date to be recorded as shown on document

Expand

title	Painter / Sandblaster

Anchor

	YaraPainter
	YaraPainter

Competency

Competency Requirements

Upload Requirements

Examples

Painter.Certificate III.Painter / Sandblaster

Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Must be issued by an RTO or Australian Government Appointed Authority
Actual copy of document is required.
Course title and associated level to be listed on certificate
Accepted examples of course titles to be displayed:
- Industrial Painter
- Blastercoater
- Surface Preparation and Coating Application
Accepted document types include:
- Completion of Trade
- Completion of Apprenticeship
- Certificate of Proficiency
- Trade Certificate
- Certificate of Completion
- Certificate of Qualification
- Certificate III
- Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval.

Document / Certificate / Number to be listed
Black and white or colour is acceptable
Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

Issue Date to be recorded as shown on document

Expand

title	Plumber

Anchor

	YaraPlumber
	YaraPlumber

Competency

Competency Requirements

Upload Requirements

Examples

External.EXT097.Plumbing Tradesperson / Contractors Licence

Name on Licence should match the person registered
Colour copy required
Only the front of the licence is required providing it meets all other verification points
Must be issued by Western Australian Government appointed organisation and the organisation logo must be present
Must display ‘Plumbing Contractors Licence or Plumbing Tradesperson Licence”
Licence number and expiry date must be displayed
Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for

an

an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment.

Yara Employee applications for training exemptions shall be approved by the relevant Department Manager. Contractor applications for training exemptions shall be approved by the relevant Yara Responsible Person.

To be deemed valid the request shall be:

Documented on Yara’s Training & Competency Exemption Form [TRG-YP-FRM-125-09]
Participant details to match applicant
Course Code and Title to match
Shall be ‘approved’
Issue date: Use date of issue
Expire date: As listed on the form
Shall have approver role, name and signature.

Avetta verifier

Please click here for the template and business rules.

Issue Date to be entered as displayed on licence or enter as yesterdays date
Expiry to be entered as shown on licence

Expand

title	Weighbridge Operators

Anchor

	YaraWeighbridge
	YaraWeighbridge

Competency

Competency Requirements

Upload Requirements

Examples

External.Certificate.EXT002 Weighbridge Operators

Name on certificate to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
Certificate must indicate completion of Weighbridge Operator
Must be Issued by an RTO with Nationally Recognised Training logo
Black and white or colour is acceptable
Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

Issue Date to be entered as date of training completion
No expiry

Expand

title	Welding

Competency

Competency Requirements

Upload Requirements

Examples

All other Trade Qualification Certificates

Click here to be re-directed to the Avetta National Business Rules for Trade Qualifications

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

Versions Compared

Old Version 7

New Version Current

Key