High Risk Work Certificates

High Risk Work Certifications

Competency	Competency Requirements	Upload Requirements
High Risk Work.Course.Working at Heights Lone Worker without fall arrest - 10509, 25045, 23229	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights Lone Worker with transcript showing US 10509, 25045, 23229 NZQA Record of Achievement showing completion of the following unit standards 10509, 25045, 23229 Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing US 10509, 25045, 23229 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.ANZ Working at Heights - 17600, 25045, 23229	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights with transcript showing US 23229, 25045, 17600 NZQA Record of Achievement showing completion of the following unit standards 23229, 25045, 17600 Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card, an additional refresher certificate, or competency card from a NZQA accredited training organisation showing US 23229, 25045, 17600 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Working at Heights Advanced - 15757, 17600, 25045, 23229	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Height Advanced with transcript showing US 15757, 23229 and ONE OR BOTH OF THE FOLLOWING 25045 or 17600 NZQA Record of Achievement showing completion of the following unit standards 15757, 23229 and ONE OR BOTH OF THE FOLLOWING 25045 or 17600 Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible15757, 17600, 25045, 23229 Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights Advanced with transcript showing US 15757, 23229 AND EITHER 17600 AND/OR 25045 Working at Heights with US 15757, 23229 AND EITHER OR 25045 AND/OR 17600 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 year from the date of training completion
High Risk Work.Course.Working at Heights Advanced with Rescue - 23229, 15757, 17025, 10509	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights Advanced with Rescue with transcript showing US 23229, 15757, 176025, 10509 NZQA Record of Achievement showing completion of the following unit standards 23229, 15757, 17025, 10509 Chorus WTC 3 Overhead Network or Refresher Certificate with transcript showing US 17025, 23229, 10509, 15757 from a NZQA accredited training organisation Chorus WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025, 23229, 10509, 15757 from a NZQA accredited training organisation Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights Advanced with transcript showing US 23229, 15757, 176025, 10509 Working at Heights with US 23229, 15757, 176025, 10509 Chorus WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025, 23229, 10509, 15757 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Working at Heights Electrical - 17025, 23229, 10509	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Height Electrical with transcript showing US 17025, 23229, 10509 NZQA Record of Achievement showing completion of the following unit standards 17025, 23229, 10509 Chorus WTC3 Overhead Network or a Refresher certificate issued from an NZQA accredited training organisation, OR Chorus WTC5 Working at Heights or a Refresher certificate issued from an NZQA accredited training organisation Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Working at Heights Electrical with transcript showing US 17025, 23232, 10509 Working at Heights with US 17025, 23232, 10509 Chorus WTC3 Overhead Network or a Refresher certificate issued from an NZQA accredited training organisation, OR Chorus WTC5 Working at Heights or a Refresher certificate issued from an NZQA accredited training organisation MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Working at Heights Fall Arrest - 15757, 23229	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Working at Heights Fall Arrest with transcript showing US 15757, 23229 or Certificate showing US 15757, 23229 NZQA Record of Achievement showing completion of the following unit standards 15757, 23229 Chorus WTC 3 Overhead Network or Refresher Certificate with transcript showing US 23229, 15757 from a NZQA accredited training organisation Chorus WTC 5 Working at Heights Refresher Certificate from NZQA accredited training organisation Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights Fall Arrest with transcript showing US 15757, 23229 Working at Heights with US 15757, 23232 Chorus WTC 5 Working at Heights Refresher Certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion. Even if the evidence has an expiry date listed, Downer NZ require this to have an expiry of 3 years from the Issue Date.
High Risk Work.Course.Working at Heights Horizontal and Vertical - 15757, 17600	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 15757, 17600 NZQA Record of Achievement showing completion of the following unit standards 15757, 17600 Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights Horizontal and Vertical with transcript showing US 15757, 17600 Working at Heights with transcript showing US 15757, 17600 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Working at Heights Pole Top Rescue - 17025	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17025 or Working at Heights Pole Top Rescue with transcript showing US 17025 NZQA Record of Achievement showing completion the following unit standards 17025 Chorus WTC 5 Working at Heights or Refresher Certificate with transcript showing US 17025 from NZQA accredited training organisation Chorus WTC 3 Overhead Network with Fall Arrest or Refresher Certificate with transcript showing US 17025 from NZQA accredited training organisation Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights Pole Top Rescue with transcript showing US 17025 Working at Heights with US 17025 WTC 5 Working at Heights or Refresher Certificate with transcript containing US 17025 WTC 3 Overhead Network with Fall Arrest or refresher with transcript containing US 17025, MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Working at Heights Rescue Planning - 23232	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 23232 or Working at Heights Rescue Planning with transcript showing 23232 NZQA Record of Achievement showing completion the following unit standard 23232 Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights Rescue Planning with transcript showing 23232 Working at Heights with US 23232 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Working at Heights Safety Harness - 23229	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 23229 or Working at Heights Safety Harness NZQA Record of Achievement showing completion the following unit standards 23229 Chorus WTC 5 Working at Heights or Refresher Certificate Chorus WTC 3 Overhead Network or Refresher Certificate Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Working at Heights US23229 Working at Heights Safety Harness Chorus WTC 3 Overhead Network or Refresher Certificate Chorus WTC 5 Working at Heights or Refresher Certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
Telecommunications Operator.Course.Chorus Overhead Network	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 10509, 23229, AND EITHER 17025 OR 25045 (3 unit standards to be listed) Chorus WTC 3 Overhead network OR Electricity supply core skills (WTC3), or refresher certificate Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either Certificate, competency card or transcript issued from a NZQA accredited training organisation showing completion of US 10509, 23229, AND EITHER 17025 OR 25045 Chorus WTC 3 Overhead network OR Electricity supply core skills (WTC3), or refresher certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion Interim evidence Issue Date: Date of training completion Expiry Date: 1st July 2024
Telecommunications Operator.Course.Chorus Overhead Network incl Fall Arrest	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 10509, 23229, 15757, AND EITHER 17025 OR 25045 (4 unit standards to be listed) Chorus WTC 3 Overhead Network including Fall Arrest or Refresher Certificate Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either Certificate, competency card or Transcript issued from a NZQA accredited training organisation showing completion of US 10509, 23229, 15757, AND EITHER 17025 OR 25045 Chorus WTC 3 Overhead network including fall arrest or refresher certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
Telecommunications Operator.Course.Chorus Elevated Work Platforms	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing the completion of Elevated Work Platforms with a minimum US 23966 NZQA Record of Achievement showing completion of unit standard 23966 Chorus WTC 2 Elevated Work Platforms or Refresher Certificate from a NZQA accredited training organisation Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standards achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing one of the following Certificate competency card issued from a NZQA accredited training organisation showing the completion of Elevated Work Platforms with a minimum US 23966 Chorus WTC 2 Elevated Work Platforms or Refresher Certificate from a NZQA accredited training organisation MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
Telecommunications Operator.Course.Chorus Underground Network	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 10507, 10508, 18038 Chorus WTC 1 Underground Network or Refresher Certificate from a NZQA accredited training organisation Chorus WTC 3 Overhead Network or Refresher Certificate from a NZQA accredited training organisation Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 10507, 10508, 18038 Chorus WTC 1 Underground Network or Refresher Certificate from a NZQA accredited training organisation Chorus WTC 3 Overhead Network or Refresher Certificate from a NZQA accredited training organisation Chorus WTC 5 Working at Heights or Refresher Certificate from a NZQA accredited training organisation MUST be provided Certificate or competency card with transcript showing US 10507, 10508, 18038	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
Telecommunications Operator.Course.Chorus Working at Height	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 10507, 10508, 10509, 18038, 23229, 15757 AND EITHER 17025 OR 25045 (7 US need to be listed) Chorus WTC 5 Working at Heights or Refresher Certificate Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Certificate or competency card with transcript showing US 10507, 10508, 10509, 17025 or 25045, 18038, 23229 Chorus WTC 5 Working at Heights or Refresher Certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
High Risk Work.Course.Mobile Elevating Work Platforms (MEWP)	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Elevated Work Platforms. Any combination of the following Unit Standards 23229, 23960, 23961, 23962, 23963, 23964, 23966, 18272 must be visible on the certificate or combined with course transcript showing unit standards achieved NZQA Record of Achievement showing completion of any combination of the following unit standards 23229, 23960, 23961, 23962, 23963, 23964, 23966, 18272 Chorus WTC 2 Elevated Work Platforms or Refresher Certificate combined with the course transcript showing Unit standards achieved/refreshed from a NZQA accredited training organisation Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standards achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Certificate showing any combination of the following unit standards 15757, 17600, 17025, 10509, 23229, 23232, 25045 Chorus WTC 2 Elevated Work Platforms with course transcript and US achieved MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Confined Space Awareness - 18426	Note this competency is for use within Downer Telco Site. The required evidence will be one of the following: NZQA Record of Achievement showing completion of the following unit standards 18426, iSkills certificate showing Confined Space Awareness Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date= Date of training completion Expiry Date= Not required
High Risk Work.Course.Confined Space Entry - 17599, 18426, 25510	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Confined Space US 17599, 18426, 25510 NZQA Record of Achievement showing completion of the following unit standards 17599, 18426, 25510 Chorus WTC 4 Confined Spaces or Refresher Certificate from a NZQA accredited training organisation Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date on NZQA record of achievement, certificate, or competency card completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Confined Space Certificate with transcript showing US17599, 18426, 25510 Chorus WTC 4 Confined Spaces or Refresher Certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
High Risk Work.Course.Confined Space Entry with Fall Prevention - 15799, 18426, 25510, 23229	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing the completion of US 17599, 18426, 25510, 23229 or Confined Space Entry with Fall Prevention - *Two Combined Certificates may be used and lowest expiry date is used.* NZQA Record of Achievement showing completion of the following unit standards 17599, 18426, 25510, 23229 Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date on NZQA record of achievement, certificate or competency completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Confined Space with Fall Prevention US 17599, 18426, 23229 (two combined certificates showing all US is acceptable – lowest expiry date is used) MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
Telecommunications Operator.Course.Chorus Confined Spaces	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Confined Space US 17599, 18426, 25510 NZQA Record of Achievement showing completion of the following unit standards 17599, 18426, 25510 Chorus WTC 4 Confined Spaces or Refresher Certificate with transcipt showing US 17599, 18426, 25510 from a NZQA accredited training organisation Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date on NZQA record of achievement, certificate, or competency card completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing either Confined Space Certificate with transcript showing US17599, 18426, 25510 Chorus WTC 4 Confined Spaces or Refresher Certificate MUST be provided	Issue Date= Date of training completion Expiry Date= 2 years from the date of training completion
High Risk Work.Course.PE Pipe Welding - Electrofusion	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of PE Pipe Welding - Electrofusion US 10980 NZQA Record of Achievement showing completion the following unit standards 10980 Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing PE Pipe Welding - US 10980 refresher MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Rigging & Slinging	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Rigging & Slinging showing US 3789 & 30072 NZQA Record of Achievement showing completion of the following unit standards 3789 & 30072 Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Rigging & Slinging US 3789, 30072 MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Load Slinging	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Load Slinging Course US 30072 NZQA Record of Achievement showing completion of the following unit standards 30072 Date of training completion or date of unit standard achieved must be Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
Operator Crane.Course.Gantry Crane (overhead travelling)	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Gantry Crane US 3800 NZQA Record of Achievement showing completion of the following unit standard 3800 Date of training completion or date of unit standard achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Gantry Crane MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Truck Loader Crane	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Truck Loader Crane US 16617 NZQA Record of Achievement showing completion of the following unit standard 16617 Date of training completion or date of unit standard achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 3 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Truck Loader Crane MUST be provided	Issue Date= Date of training completion Expiry Date= 3 years from the date of training completion
High Risk Work.Course.Chainsaw	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Chainsaw Course completion NZQA Record of Achievement showing completion of the following unit standards 6916& 6917 Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date on NZQA record of achievement, certificate or competency card completion date exceeds business unit (site) refresher requirements Downer OSM – no expiry date All other sites – 3 years from completion date An additional certificate or competency card issued from a NZQA accredited training organisation showing Chainsaw course MUST be provided	Issue Date= Date of training completion Expiry Date= Downer OSM Site – no expiry date All other Sites – 3 years from completion date
High Risk Work.Course.Concrete Saw	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Concrete Saw course or US NZQA Record of Achievement showing completion of the following unit standards 26822 & 26823 Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds business unit (site) refresher requirements Downer OSM and Transpower – no expiry date All other sites – 3 years from completion date An additional certificate or competency card issued from a NZQA accredited training organisation showing concrete saw course MUST be provided	Issue Date= Date of training completion Expiry Date= Downer OSM Site – no expiry date All other Sites – 3 years from completion date
Electrical.Assessment.NZECP46 - HV Live Line Work	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 11kV” issued by either Lines & Cable Live Training Specialists BETAA Consultants Ltd Must state “ requirements of NZECP46:2003” Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 11kV” MUST be provided	Issue Date = Date on certificate Expiry Date = Expiry Date on certificate (1 year from issue date)
Electrical.Endorsement.Live Line Glove & Barrier	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 11kV” issued by either Lines & Cable Live Training Specialists BETAA Consultants Ltd Course Completion date and Certificate number must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 11kV” MUST be provided	Issue Date= Date of course completion Expiry Date= 1 years from issue date
Electrical.Endorsement.Live Line Hot Stick	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 11kV” and/or Hot Stick issued by either Lines & Cable Live Training Specialists BETAA Consultants Ltd Course Completion date and Certificate number must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 11kV” and/or Hot Stick MUST be provided	Issue Date= Date of assessment completion Expiry Date= 1 years from issue date
Electrical.Endorsement.Voltage 1-11kV	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 11kV” from either Lines & Cable Live Training Specialists BETAA Consultants Ltd Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Certificate or competency card must be issued from a NZQA accredited training Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 11kV” MUST be provided	Issue Date= Date of course completion Expiry Date= 1 year from issue date
Electrical.Endorsement.Voltage 3-33kV	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 33V” from either Lines & Cable Live Training Specialists BETAA Consultants Ltd Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Certificate or competency card must be issued from a NZQA accredited training Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 33kV” MUST be provided	Issue Date= Date of course completion Expiry Date= 1 year from issue date
Electrical.Endorsement.Voltage 6-66kV	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 66kV” from either Lines & Cable Live Training Specialists BETAA Consultants Ltd Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Certificate or competency card must be issued from a NZQA accredited training Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 1 year, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 66kV” MUST be provided	Issue Date= Date of course completion Expiry Date= 1 year from issue date
Electrical.Endorsement.Voltage 0-1000V	The evidence will be a: Certificate showing Certificate of Attendance for “Glove & Barrier Register/Audit up to 1000V” from either Lines & Cable Live Training Specialists BETAA Consultants Ltd Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Certificate or competency card must be issued from a NZQA accredited training Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 1 year o, an additional certificate showing Attendance for “Glove & Barrier Register/Audit up to 1000kV” MUST be provided	Issue Date= Date of course completion Expiry Date= 1 year from issue date
Electrical.Endorsement.Specific Types of Switches and Voltages U/G	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A with Endorsement of Specific Types of Switches and Voltages U/G Mita Consulting letter showing attendance for Vector WTC 8A with Endorsement of Specific Types of Switches and Voltages U/G Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A with Endorsement of Specific Types of Switches and Voltages U/G Mita Consulting letter showing attendance for Vector WTC 8A with Endorsement of Specific Types of Switches and Voltages U/G Course with a M – Met Vector Requirements MUST be provided
Electrical.Endorsement.Specific Types of Switches and Voltages Substation	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B with Specific Types of Switches and Voltages Substation Mita Consulting letter showing attendance for Vector WTC 8B with Specific Types of Switches and Voltages Substation Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B with Specific Types of Switches and Voltages Substation Mita Consulting letter showing attendance for Vector WTC 8B with Specific Types of Switches and Voltages Substation Course with a M – Met Vector Requirements MUST be provided
Electrical.Endorsement.Specific Types of Switches and Voltages O/H	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C with Specific Types of Switches and Voltages O/H Mita Consulting letter showing attendance for Vector WTC 8C with Specific Types of Switches and Voltages O/H Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C with Specific Types of Switches and Voltages O/H Mita Consulting letter showing attendance for Vector WTC 8C with Specific Types of Switches and Voltages O/H Course with a M – Met Vector Requirements MUST be provided