Utilities Management Business Rules | TransGrid | Individual | Trade | Electrical

Certificates

Licence

Competency Name	Competency Requirements	Upload Requirements
Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work	When Licence is uploaded: Applicants name to be displayed on uploaded evidence and to match applicants registered name ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed Screenshots from websites are not accepted - Must be copy of the Licence Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading Black and white or coloured copy of evidence can be accepted When Invoice (For new contractor Licence) has been uploaded: Applicants name to be displayed on uploaded evidence and to match applicants registered name ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed Date of receipt to be displayed on the invoice Contractor number to be displayed on document Must be issued by relevant state government authority Black and white or coloured copy of evidence can be accepted	When Licence is uploaded: Expiry Date = The date of expiration on the evidence When Invoice (For new contractor Licence) has been uploaded: The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion
Qualification.Licence.Electrical	Name on Electrical Licence to match the person registered Accepted form/s of evidence: Electrical contractor licence Supervisor certificate licence showing 'Q' can be accepted New Zealand Electrical licence listing 'Inspector' New Zealand practicing licence listing 'Electrician' Screen shot showing that the licence is current for an interim period of 4 weeks and then the licence needs to be supplied Must be issued by nominated / relevant government department based on state of issue and reflect the corresponding logo	Expiry date to be recorded as shown on licence
Mechanic.Certificate of Proficiency.Radio Mechanic Trade	Name on certificate or card to match the person registered Licence in Electrical Trade to be listed Must be issued by NSW Fair Trading Black and white or colour is acceptable	Expiry date to be recorded as per licence Issue date only required if Certificate is provided

Statement of Attainment

Competency Name	Competency Requirements	Upload Requirements
Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment Perform rescue from a live LV panel	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: - RTO Name, Code and Logo - Units of competency code and name, date completed -Date certificate issued -Authorised person name or title (does not necessarily need a signature) -Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) ·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted · Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date · Expiry date is 13 months from date of training completion Accepted UOC: · UETTDRRF06,; or · UETDRRF004 **RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 13 months from date of training completion
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence is not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date is 1 year from date of training completion
Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Certificate.UETTDRRF11 - Testing of connections to low voltage electricity networks	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation at ground near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniques	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted. NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.AHCPCM201A - Recognise plants	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE:Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UEENEE101A - Apply OHS regulations, codes and practices in the workplace	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsaws	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Certificate.UETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove)	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Certificate.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick)	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue	Applicants name to be shown on document Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable) Please note: the certified document that has been issued by the Registered Training Organisation (RTO) must meet the following requirements to be approved: RTO Name, Code and Logo Units of competency code and name, date completed Date certificate issued Authorised person name or title (does not necessarily need a signature) Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card) RTO registration must only have been current at the time of training completion / awarding the document o Document verifier to ensure the Issue of this document is an RTO. Click HERE for Internal Process on checking RTO’s NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details NOTE: Temporary / Interim statement of attainment evidence not accepted	Record the Issue date within Onsite as follows: Completion date / Training Date - if listed on certificate (this date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date Expiry date not required
Transgrid approved evidence training	Competency must be escalated externally to Transgrid to review/approve under all circumstances	Issue Date = Determined by Transgrid Expiry Date = Determined by Transgrid