Manufacturing Business Rules | Yara Pilbara | Trade Qualifications

Carpenter.Certificate III.

• Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Must be issued by an RTO or Australian Government Appointed Authority
  
• Actual copy of document is required.
• Course title and associated level to be listed on document
• Accepted examples of course titles to be displayed:
  • Carpentry and Joinery
  • Carpentry
  • Carpentry and/or Formsetting
• Accepted document types include
  • Completion of Trade
  • Completion of Apprenticeship
  • Certificate of Proficiency
  • Trade Certificate
  • Certificate of Completion
  • Certificate of Qualification
  • Certificate III
  • Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval

• Document / Certificate / Number to be listed
• Black and white or colour is acceptable
• Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be recorded as shown on document

Electrical Instrumentation.Certificate III.E&I Technicians

• Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Must be issued by an RTO or Australian Government Appointed Authority
• Actual copy of document is required.
• Course title and associated level to be listed on certificate
• Accepted examples of course titles/codes to be displayed:
  • Electrotechnology Electrician
  • Electrical Mechanic
  • Electrical & Instrumentation
• Accepted document types include
  • Certificate III

Note: other equivalent competency codes may be accepted with Yara approval.

• Document / Certificate / Number to be listed
• Black and white or colour is acceptable
• Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be recorded as shown on document

Electrical Instrumentation.Certificate IV.E&I Technicians

•  Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Must be issued by an RTO or Australian Government Appointed Authority
• Actual copy of document is required.
• Course title and associated level to be listed on certificate
• Accepted examples of course titles/codes to be displayed:
  • UEE40407
  • UEE40410
  • UEE40411
  • UEE40420
• Accepted document types include:
  • Completion of Trade
  • Completion of Apprenticeship
  • Certificate of Proficiency
  • Trade Certificate
  • Certificate of Completion
  • Certificate of Qualification
  • Certificate IV
  • Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval.

• Document / Certificate / Number to be listed
• Black and white or colour is acceptable
• Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be recorded as shown on document

External.Certificate.EXT067 Inspection Certification

Inspector.Certificate.(AICIP, API, ASME, NACE, AWS, CSWIP or TWI) - Inspection Certification

Inspector.Certificate.NACEINSPL1 - Inspection Certification

• Name on document to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Certificate will demonstrate Inspector Accreditation
• Document musts demonstrate competency to NACEINSPL1 (AICIP, API, ASME, NACE, AWS, CSWIP or TWI)
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be entered as date of training completion
• Expiry date as displayed on certificate.  If no expiry date then 3 years from issue date.

Mechanical.Certificate IV.Mechanical Technicians

• Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Must be issued by an RTO or Australian Government Appointed Authority
• Actual copy of document is required.
• Course title and associated level to be listed on certificate
• Accepted examples of course titles to be displayed:
  • Engineering - Mechanical Trade
  • Engineering - Mechanical Trade (Fitting/machining)
  • Engineering Tradesperson (Mechanical) (Fitting)
  • Diesel Fitting
  • Diesel Fitting ( Pathway )
  • Mechanical Fitter
  • Mechanical Trade (Maintenance) - Fitting and / or Turning Pathway
  • Fitter and Turner or Mechanical
  • Fitter and Machinist
  • MEM30219 (Or any previous superseded equivalent course codes shown against the mapping of this course on training.gov.au)
• Accepted document types include
  • Completion of Trade
  • Completion of Apprenticeship
  • Certificate of Proficiency
  • Trade Certificate
  • Certificate of Completion
  • Certificate of Qualification
  • Certificate IV
  • Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval.

• Document / Certificate / Number to be listed
• Black and white or colour is acceptable
• Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be recorded as shown on document

Painter.Certificate III.Painter / Sandblaster

• Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Must be issued by an RTO or Australian Government Appointed Authority
• Actual copy of document is required.
• Course title and associated level to be listed on certificate
• Accepted examples of course titles to be displayed:
  • Industrial Painter
  • Blastercoater
• Accepted document types include:
  • Completion of Trade
  • Completion of Apprenticeship
  • Certificate of Proficiency
  • Trade Certificate
  • Certificate of Completion
  • Certificate of Qualification
  • Certificate III
  • Australian Recognised Trade Certificate

Note: Other equivalent competency codes may be accepted with Yara approval.

• Document / Certificate / Number to be listed
• Black and white or colour is acceptable
• Scanned document to be clearly legible

NOTE: All international qualifications must be sent to site for approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be recorded as shown on document

External.EXT097.Plumbing Tradesperson / Contractors Licence

• Name on Licence should match the person registered
• Colour copy required
• Only the front of the licence is required providing it meets all other verification points
• Must be issued by Western Australian Government appointed organisation and the organisation logo must be present
• Must display ‘Plumbing Contractors Licence or Plumbing Tradesperson Licence”
• Licence number and expiry date must be displayed
• Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be entered as displayed on licence or enter as yesterdays date
• Expiry to be entered as shown on licence

• Name on certificate to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Certificate must indicate completion of Weighbridge Operator
• Must be Issued by an RTO with Nationally Recognised Training logo
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be entered as date of training completion
• No expiry

External.Certificate.EXT093 International Welding Inspector Certification

Welder.Certificate.(CSWI), UK

Welder.Certificate.(CSWIP 3-2) SA

Welder.Certificate.(IWI S) Aust

Welder.Certificate.(SAIW) NZ (CBIP)

• Name on document to match person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Document musts demonstrate competency to: 

a.    (IWI S) Aust. (CSWI), 
b.    UK (CSWIP 3.2)
c.    SA (SAIW) 
d.    NZ (CBIP)  

• Evidence will be issued by Welding Qualification and Certification Boards such as WTIA : Welding Technology Institute of Australia or Weld Australia
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be entered as date of training completion
• Expiry date as displayed on certificate. If no expiry date then no date to be entered

Welder/Boilermaker.Certificate III.

• Name on document to match the person registered (however shortened versions such as 'Chris' for 'Christopher' are acceptable)
• Must be issued by an RTO with Nationally Recognised Training logo
• Actual copy of document is required.
• Course title and associated level to be listed on document
• Accepted examples of course titles/codes to be displayed:
  • Boilermaking or Engineering - Fabrication
    
  • AS1796 Certification
  • AS2214 Certification
  • AS1554 Certification
  • WTIA Certified Welder

Note: Other equivalent competency codes may be accepted with Yara approval. Avetta verifiers click here for additional business rule information prior to verification of this competency

Note: Further qualification may be required to be demonstrated by producing code-compliant & WPS compliant welds

• Accepted document types include
  • Completion of Trade
  • Completion of Apprenticeship
  • Certificate of Proficiency
  • Trade Certificate
  • Certificate of Completion
  • Certificate of Qualification
  • Certificate III
  • Australian Recognised Trade Certificate
• Document / Certificate / Number to be listed
• Black and white or colour is acceptable
• Scanned document to be clearly legible

Exemption Process:

An exemption may be granted for a training competency requirement listed in the Training Matrices for an employee or contractor. Exemptions shall be applied only after careful consideration and risk assessment. Please click here for the template and business rules.

• Issue Date to be recorded as shown on document