Mining Business Rules | Thiess | Individual | Trade | Engineering and Mechanical

avy

Competency	Competency Requirements	Upload Requirements	Examples
Mechanical.Qualified.Certificate of Proficiency - Fitter and Turner	Name on qualification to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Accepted Course Titles include: Fitter and Turner Black and white or colour acceptable Must be clearly scanned and legible If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Certificate of Proficiency - Fitter Machinist	Name on qualification to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Accepted Course Titles include: Fitter Machinist Black and white or colour acceptable Must be clearly scanned and legible If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Certificate of Proficiency - Engineering Fabrication	Name on qualification to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Accepted Course Titles include: Engineering Fabrication Engineering - Fabrication Trade Black and white or colour acceptable Must be clearly scanned and legible If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Engineering.Statement of Attainment.Partial Completion of Cert II in Engineering.	Name on qualification to match the person registered Statement of Attainment to be issued by a Registered Training Organisation(RTO) Accepted Documentation Type: Pirtek Statement of Attainment can be accepted Engineering.Statement of Attainment Black and White or colour acceptable Must be clearly scanned and legible-PDF copy	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Certificate of Proficiency - Boilermaker	Name on certificate to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Australian Recognised Trade Certificate in the relevant course to be listed Accepted Course Titles include: Boilermaker Structural Steel Tradesperson Black and white or colour is acceptable If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Medium Vehicle Mechanic *Acceptable Certificates;* Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial) OR COP - Automotive (Heavy Vehicle Mechanical)(Road Transport) - Medium Vehicle Mechanic	Name on qualification to match the person registered Completion date or issue date must be displayed Course listed on certificate must match competency name exactly and be a certificate of proficiency Note - this business rule is for the Medium Vehicle Mechanic role only - Pegasus to view the submitted role prior to approval From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Certificate II in Engineering (High Pressure Hose Assemblies) or equivalent	Name on qualification to match the person registered Must state Engineering (High Pressure Hose Assemblies) or equivalent Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered	NOTE: The following example document is only applicable when accepted for this competency within the following role only: Hydraulic Hose Technician (Fabricate Hose Only).
Certificate III Engineering (Mechanical Trade)	Name on qualification to match the person registered Must state Engineering (Mechanical) or equivalent Black and white or colour acceptable Must be clearly scanned and legible From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted.	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Hydraulic Hose Technician (Fabricate Hose Only)	Name on certificate to match the person reregistered Statement of Attainment to be issued by a Registered Training Organisation(RTO) Black and White or colour acceptable Must be clearly scanned and legible-PDF copy Accepted Documentation Type: Pirtek Certificate of Completion Engineering Statement of Attainment	Issue date to be recorded No expiry date
Heavy Vehicle Mechanic (Mobile Plant) - Shared Zone Qualifications *Acceptable Certificates;* Certificate of Proficiency - Automotive Mobile Plant Technology OR Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial) OR Certificate of Proficiency - Automotive Mechanical Technology OR Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Road Transport)	Name on qualification to match the person registered Completion date or issue date must be displayed Course listed on certificate must match competency name exactly 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) THIESS APPROVAL REQUIRED FOR “Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)” Certificate must be uploaded with the transcript. The transcript must list ALL 3 modules listed below and must be uploaded with approval email from mtarthursouthinductions@thiess.com.au It is the company’s responsibility to seek the approval prior to the uploading of the documents. If approval is not uploaded for the Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport) + transcripts, the file document will be rejected.* Service hydraulic systems Inspect service and repair tracked type drive and support systems Diagnose and repair mobile plant braking systems Note - this business rule is for the Heavy Vehicle Mechanic (Mobile Plant) - Shared Zone role - Pegasus to view the submitted role prior to approval From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Heavy Vehicle Mechanic (Mobile Plant) - Thiess Area Only *Acceptable Certificates;* Certificate of Proficiency - Plant Mechanic OR Certificate of Proficiency - Heavy Vehicle OR Certificate of Proficiency - Diesel Fitter OR Certificate of Proficiency - Automotive Mobile Plant Technology OR Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical)(Industrial) OR Certificate of Proficiency - Automotive Mechanical Technology OR Certificate of Proficiency in Agricultural Mechanical Technology (Plant) OR Certificate of Proficiency - Certificate IV in Engineering (Plant) OR Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)	Name on qualification to match the person registered Completion date or issue date must be displayed Course listed on certificate must match competency name exactly 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) THIESS APPROVAL REQUIRED FOR “Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport)” Certificate must be uploaded with the transcript. The transcript must list ALL 3 modules listed below and must be uploaded with approval email from mtarthursouthinductions@thiess.com.au* It is the company’s responsibility to seek the approval prior to the uploading of the documents. If approval is not uploaded for the Certificate of Proficiency - Automotive (Heavy Vehicle Mechanical) (Road Transport) + transcripts, the file document will be rejected. Service hydraulic systems Inspect service and repair tracked type drive and support systems Diagnose and repair mobile plant braking systems Note - this business rule is for the Heavy Vehicle Mechanic (Mobile Plant) - Thiess Area Only role - Pegasus to view the submitted role prior to approval From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical Engineering Qualification	Name on qualification to match the person registered Must state Mechanical Engineering or equivalent Black and white or colour acceptable Must be clearly scanned and legible	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Certificate of Proficiency - Automotive (Light Vehicle - Mechanical)	Name on qualification to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Accepted Course Titles include: Automotive (Light Vehicle - Mechanical) Black and white or colour acceptable Must be clearly scanned and legible From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Certificate of Proficiency - Light Vehicle	Name on qualification to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Accepted Course Titles include: Light Vehicle Black and white or colour acceptable Must be clearly scanned and legible From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered
Mechanical.Qualified.Certificate of Proficiency - Motor Mechanic	Name on qualification to match the person registered Accepted Documentation Types: 'Certificate of Proficiency' accepted only (No Cert III/Craft Certificate/Certificate of Completion etc) Accepted Course Titles include: Motor Mechanic Black and white or colour acceptable Must be clearly scanned and legible From the 1st of September NSW Certificate of Proficiency is the only document that will be accepted. If the required Australian-issued qualification evidence cannot be supplied because the worker has only internationally issued trade qualification evidence: The worker may instead be able to meet the requirements for the ‘Trade Upskill’ role. This role can only be applied to workers where the supplier company already has an agreement about this in place with Thiess. Avetta verifiers click here for additional business rules	Issue Date = Date of completion Expiry Date = No expiry date to be entered