Network Specific

Competency	Competency Requirements	Upload Requirements
Telecommunications Operator.Induction.Vodafone Health and Safety	The required evidence will be one of the following: Certificate or competency card showing Vodafone Health and Safety course completion The evidence will be issued by Vodafone Evidence must be valid and in date Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy	Issue Date= As shown on evidence Expiry Date= 2 years from issue date
Telecommunications Operator.Module.Vodafone EMF/RF Awareness	The required evidence will be a: Certificate or competency card showing EMF/RF Awareness course completion Issue date must be clear and current Must show assessment pass result Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Where the evidence completion date exceeds 3 years or has expired, an additional certificate showing EMF/RF Awareness course completion MUST be provided	Issue Date= As shown on evidence Expiry Date= 3 years from issue date
Telecommunications Operator.Accreditation.Vodafone Individual Accreditation	The required evidence will be a: Vodafone “Individual Accreditation Application” The evidence will be issued by Vodafone Expiry is 2 years from receiving evidence All sections must be filled out Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy	Issue Date= As shown on evidence Expiry Date= 2 years from issue date
Underground Services.Induction.Exxon Mobil Safety Passport	The evidence will be a: Certificate or competency card showing Safety Passport Evidence will be issued by Exxon Mobile Only Issue and expiry date must be clear and visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional certificate showing Safety Passport MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Electrical.Document.Transpower Substation Entry SE1	The evidence will be a one of the following: Certificate showing Substation Entry (SE1) Level 1 course completion Certificate showing TPSS 06.21 RAE Restricted Areas Entry course completion Evidence will be issued by Gridskills ONLY Course Completion date must be visible Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional certificate showing either Substation Entry (SE1) Level 1 or TPSS 06.2 RAE Restricted Areas Entry course completion MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Power.Document.Transpower-SE2 On Job Assessment or Refresher Webinar	The evidence will be a: Certificate showing Substation Entry (SE2) Level 2 or refresher Certificate Evidence will be issued by Gridskills ONLY Course Completion date must be visible Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional certificate showing Substation Entry (SE2) Level 2 or refresher course completion MUST be provided	Issue Date= Course completion date Expiry Date=2 years from course completion date
Power.Document.Transpower-SE2 On Job Assessment (Tauranga substation)	The evidence will be a: Certificate showing Substation Entry (SE2) Level 2 Certificate Evidence will be issued by Gridskills ONLY Course Completion date must be visible Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable	Issue Date= Course completion date Expiry Date=Non-expiring
Power.Document.Transpower Work Management	The evidence will be a: Certificate showing Work Management course completion Evidence will be issued by Gridskills ONLY Course Completion date must be visible Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Rail.Course.KiwiRail Electrification Awareness Basic (EAB)	The required evidence will be either of the following: Copy of email confirming course completion of KiwiRail – Electrification Awareness Basic (EAB) issued by KiwiRail Screenshot or website print-out confirming course completion / pass result of KiwiRail – Electrification Awareness Basic (EAB) Evidence must show KiwiRail website URL or email from @kiwirail.co.nz Evidence must show course completion date Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy If completion date exceeds 2 years, an additional refresher or course completion of either Copy of email confirming course completion of KiwiRail - Electrification Awareness Basic (EAB) issued by KiwiRail Screenshot or website print-out confirming course completion / pass result of KiwiRail Electrification Awareness Basic (EAB) issued by KiwiRail MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Rail.Course.KiwiRail Electrification Awareness Intermediate (EAI)	The required evidence will be either of the following: Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI) Screenshot or system print-out confirming course completion / pass result of KiwiRail - Electrification Awareness Intermediate (EAI) Evidence must show KiwiRail website URL or email from @kiwirail.co.nz Evidence must be valid and in date Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy If completion date exceeds 2 years, an additional refresher or course completion of either Copy of email confirming course completion of KiwiRail - Electrification Awareness Intermediate (EAI) Screenshot or website print-out confirming course completion / pass result KiwiRail Electrification Awareness Intermediate (EAI) issued by KiwiRail MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Rail.Induction.KiwiRail	The required evidence will be either of the following: Copy of email confirming course completion of KiwiRail Induction Screenshot or website print-out confirming course completion / pass result of KiwiRail Induction Evidence must show KiwiRail website URL or email from @kiwirail.co.nz Evidence must be valid and in date Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy	Issue Date= Course completion date Expiry Date= Not required
Rail.Induction.KiwiRail Individual Train Detection	The required evidence will be either of the following: Copy of email confirming course completion of KiwiRail Individual Train Detection Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection Evidence must show KiwiRail website URL or email from @kiwirail.co.nz Evidence must be valid and in date Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy If completion date exceeds 2 years, an additional refresher or course completion of either Copy of email confirming course completion of KiwiRail Individual Train Detection issued by KiwiRail Screenshot or website print-out confirming course completion / pass result of KiwiRail Individual Train Detection issued by KiwiRail MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Underground Services.Licence.BeforeUdig	The evidence will be a: Certificate showing beforeUdig Certified Locator Evidence will be issued by beforeUdig Certified Locator ONLY Course Completion date must be visible Where assessor /signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 3 years, an additional certificate showing beforeUdig Certified Locator MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Underground Services.Induction.CentrePort Wellington	The evidence will be one of the following CentrePort Access Card Certificate showing CentrePort Wellington Induction Evidence will be issued by CentrePort ONLY Expiry date must be visib Where assessor / Transpower CEO signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence has expired, an additional certificate or card issued from CentrePort MUST be provided	Issue Date= Not required Expiry Date= As per evidence
Electrical.Course.Ventia Excavation Drill Permit & Inside Premise Permit	The evidence will be a: Ventia Certificate of Achievement showing completing EDP/IPP Permit Evidence will be issued by Ventia ONLY Course Completion date must be visible VisRes ID number must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing completing EDP/IPP Permit MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Electrical.Course.Ventia Risk Management	The evidence will be a: Ventia Certificate of Achievement showing completing Risk Management Evidence will be issued by Ventia ONLY Course Completion date must be visible VisRes ID number must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional Ventia Certificate of Achievement showing Risk Management MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Water.Certificate.Watercare Customer Experience	The evidence will be: Watercare certificate showing recognition of "Customer Experience Training" Course Certificate Number MUST be visible Evidence will be issued by Watercare ONLY Expiry date MUST be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable	Issue Date= As per certificate Expiry Date=Not required
Water.Induction.Watercare	The evidence will be one of the following: Watercare certificate showing recognition of "Networks - Contractor Induction" Course Certificate Number MUST be visible Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible Evidence will be issued by Watercare ONLY Expiry date MUST be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 1 years, an additional competency card of one of the following Watercare certificate showing recognition of "Networks - Contractor Induction" Course Certificate Number MUST be visible Watercare competency card showing recognition of "Safety Induction" ID number MUST be visible Watercare attendance sheet displaying any "Induction" applicate signature MUST be visible MUST be provided	Issue Date= 1 years prior to expiry date Expiry Date= As per evidence
Electrical.Induction.Ventia Chorus Protect the Network	The evidence will be one of the following: Certificate of Achievement showing recognition of Chorus - Protect The Network VisRes ID number and VNZ trainer name must be displayed Course Completion date must be visible Screen shot from VisRes SSP portal showing compliant for Chorus - PTN Must be from visres.vspl.net website Expiry date must be visible and current Evidence will be issued by Ventia ONLY Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Telecommunications Operator.Induction.Spark or Chorus Protect the Network	The evidence will be one of the following: Ventia Certificate of Achievement showing recognition of Chorus - Protect The Network Course Completion date must be visible VisRes ID number and VNZ trainer name must be displayed Screen shot from VisRes SSP portal showing compliant for Chorus - PTN Must be from visres.vspl.net website Expiry date must be visible and current Screenshot from Spark website showing under "My Achievements" course completion of PTN Accreditation Training Must be from ako.spark.co.nz Completed Date must be visible UCG certificate stating PTN Accreditation Training (2020) Certificate number MUST be visible Must show "This module covers; Accreditation, Hazards, Work Plans, Security and Access, Human Error, Accreditation Assessment Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 years, an additional Certificate of Achievement showing recognition of Chorus - Protect The Network MUST be provided	Issue Date= Course completion date/2 years prior to expiry date Expiry Date= 2 years from course completion date/ evidence expiry date
Contractor.Authority.Chorus Access Card	The required evidence will be one of the following: Chorus Access Card Must show "Chorus Access Card" Must display image of worker Expiry date must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Where the evidence has expired, an additional card must be provided	Issue Date= Not required Expiry Date= As Shown on evidence
Telecommunications Operator.Induction.Horizon Network Safety	The evidence will be one of the following: Horizon Network Safety Certificate Assessment Completion date or expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable	Issue Date= As shown on evidence Expiry Date= As Shown on evidence
Telecommunications Operator.Induction.Kordia Site Access	The required evidence will be a: Screenshot or email from Access@kordia.co.nz confirming Site Accredited Issue date must be clear Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Where the evidence completion date exceeds 3 years, an additional Screenshot or email from Access@kordia.co.nz confirming Site Accredited MUST be provided	Issue Date= Course completion date Expiry Date= 3 years from course completion date
Telecommunications Operator.Induction.Vocus Network Safety	The evidence will be: Vocus Statement of Completion MUST be visible showing one of the following Vocus NZ Bunker site Vocus NZ Core Site VDC-AKL Vocus NZ Offices Evidence will be issued by Vocus ONLY Issued on AND Valid to MUST be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 1 years, an additional Vocus Statement of Completion showing one of the following: Vocus NZ Bunker site Vocus NZ Core Site VDC-AKL NZ Offices MUST be provided	Issue Date= The course completion date Expiry Date = 1 years from issue date
Telecommunications Operator.Course.Chorus Remote Access Tracks	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978 Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion NZQA Record of Achievement showing completion the following unit standards 17976, 17978 Chorus WTC 6 Remote Access Tracks or Refresher Certificate Date of training completion or date of unit standards achieved must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card showing either Certificate or competency card issued from a NZQA accredited training organisation showing completion of US 17976, 17978 Certificate or competency card issued from a NZQA accredited training organisation showing completion of Four Wheel Drive or Refresher Course Completion Chorus WTC 6 Remote Access Tracks or Refresher Certificate MUST be provided	Issue Date= The course completion date Expiry Date = 2 years from issue date
Electrical.Induction.Powernet Network Access	The evidence will be one of the following: Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation” Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked Certificate or competency card issued from Powernet stating “Network Access Certificate” Assessment Completion date or expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Powernet Record of Safety Training document stating “Network Access Certificate training and authorisation” Powernet “Network Access Certificate Request” form – Powernet section 2.0 must be completed and approved (Yes) box ticked Certificate or competency card issued from Powernet stating “Network Access Certificate” MUST be provided	Issue Date= The course completion date Expiry Date = 2 years from issue date
Electrical.Induction.Unison Networks Safety	The evidence will be one: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Unison OS1010 (Fibre) Assessment Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 14 months, an additional certificate showing Attendance for “Unison OS1010 (Fibre)” MUST be provided	Issue Date= The course date Expiry Date = 14 months from issue date
Electrical.Induction.Counties Power Network Safety	The evidence will be one of the following: "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction Certificate or competency card issued from Counties Power stating “Counties Power Authorised” Assessment Completion date or expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 1 year, an additional certificate showing one of the following "Training and Assessment Report" from SafeT Factors stating Counties Power Network Safety Induction Certificate or competency card issued from Counties Power stating “Counties Power Authorised” MUST be provided	Issue Date= The course completion date Expiry Date = 1 years from issue date
Electrical.Course.Aurora Electrical Course Instruction	The required evidence will be either of the following: Certificate of Attendance – “Restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard” Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction Evidence must be valid and in date Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date exceeds 2 years, an additional refresher or course completion of either Certificate of Attendance – “restricted Area Work, For work on the Aurora Energy Network” and “Aurora Energy Competency Standard” Certificate or competency card issued from a NZQA accredited training organisation showing completion of Aurora Network Safety Induction MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Electrical.Induction.Wellington Electricity Safe Work Practices	The evidence will be: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Wellington Electricity Network Safety Induction MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Electrical.Course.Wellington Electricity Permit Management	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management Training and Assessments report issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Recipient WTC 4.8 Date of training completion must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity Permit Management MUST be provided	Issue Date= Course completion date Expiry Date= 2 years from course completion date
Electrical.Induction.Waipa Networks	The evidence will be: Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems Assessment Completion date must be visible Where Waipa Representative signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Applicant must have signed induction form Copy must be clear and legible Colour copy or black and white copy is acceptable Where the evidence completion date exceeds 2 year, an additional form showing Contractor Safety Induction form from Waipa Networks, Health and Safety at Work and Environment Management Systems MUST be provided	Issue Date= Induction date on evidence Expiry Date = 2 years from induction date
Electrical.Course.Meridian EAC	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites” Email confirmation from @meridianenergy.co.nz of EAC Course completion Evidence must be valid and visible date Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Copy must be clear and legible Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date exceeds 2 years or has expired, an additional refresher or course completion of either Certificate or competency card issued from a NZQA accredited training organisation showing completion of “EAC Meeting GPG 401 for Meridian Energy Hydro & Wind Generation Sites” Email confirmation from @meridianenergy.co.nz of EAC Course completion MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Electrical.Course.ScanPower - Close Approach	The required evidence will be either of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach” Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” with any between 1 – 6D Email confirmation from @scanpower.co.nz of course completion of “close approach” Evidence must be valid and in date Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date exceeds 2 years, an additional refresher or course completion of either Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Close Approach” Certificate or competency card issued from a NZQA accredited training organisation showing completion of “Scanpower Competencies” Email confirmation from @scanpower.co.nz of course completion of “close approach” MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Electrical.Accreditation.Unison Declaration of Competency to access	The evidence will be one of the following: Unison Declaration of Competency to Access Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable	Issue Date = as per evidence Expiry date= as per evidence
Telecommunications Operator.Competency.Chorus WTC3 - Overhead Network and NC or NZCESL2	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion AND NZQA Record of Achievement showing National or New Zealand Certificate in Electricity Supply Level 2 Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion or date of unit standard achieved must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers If completion date on evidence exceeds 2 years, an additional certificate or competency card issued from a NZQA accredited training organisation showing Certificate or competency card issued from a NZQA accredited training organisation showing Chorus WTC 3 Overhead Network Course Completion MUST be provided
Power.Induction.Powerco Network Safety - Part A/B	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction Attendance record from a NZQA training organisation showing Powerco Network Safety Induction Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Network Safety Induction Attendance record from a NZQA training organisation showing Powerco Network Safety Induction MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Course.Powerco High Voltage Isolation & Access Procedures	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures Attendance record from a NZQA training organisation showing Powerco HVIAP Course Completion date must be visible Pass Number MUST be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of High Voltage Isolation and Access Procedures Attendance record from a NZQA training organisation showing Powerco HVIAP – must show PASS number MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Course.Powerco Operational Communication	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication Attendance record from a NZQA training organisation showing Powerco Operational communication Course Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing on of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Powerco Operational Communication Attendance record from a NZQA training organisation showing Powerco Operational communication MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Powerco WTC 5C Contractor Attestation	The required evidence will be: Powerco Appendix A – Contract Works Manual Standard Clarification Notification document Must show Competency Class 5C Adjacent Communications Work The evidence Must have Powerco’s Logo and match example document The evidence Must have PDF format Where “declaration completed by” must be filled out with Company, position, signature and date Applicant’s name MUST be displayed on the Declaration and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Declaration must be clear and legible Can be in colour copy OR black and white copy	Issue Date:= Date signed •Expiry Date: Not required
Electrical.Induction.Vector Network Safety (WTC1)	The evidence will be one: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector Network Safety Induction or Vector WTC 1 Induction course Assessment Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing Attendance for “Network Safety Induction” or “Vector Induction WTC 1” MUST be provided	Issue Date= The course date Expiry Date = 2 years from issue date
Electrical.Induction.Vector Network Safety Induction (WTC 2)	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2 Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency Standard Version 2, must also state practicing licence number Assessment Completion date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector NSI or Vector WTC 2 Mita Consulting letter showing attendance for Vector NSI Course included USH001 Work Type Competency MUST be provided	Issue Date= The course date Expiry Date = 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC3	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3 Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 3 Mita Consulting letter showing attendance for Vector WTC 3 Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 5	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5 Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 5 Mita Consulting letter showing attendance for Vector WTC 5 Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 6	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6 Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 6 Mita Consulting letter showing attendance for Vector WTC 6 Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC7	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7 Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7 Mita Consulting letter showing attendance for Vector WTC 7 Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 7A	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 8	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8 Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8 Mita Consulting letter showing attendance for Vector WTC 8 Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 8A	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8A Mita Consulting letter showing attendance for Vector WTC 8A Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 8B	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8B Mita Consulting letter showing attendance for Vector WTC 8B Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 8C	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence completion date exceeds 2 year, an additional certificate showing one of the following Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 8C Mita Consulting letter showing attendance for Vector WTC 8C Course with a M – Met Vector Requirements MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Core Instruction WTC 10	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers Where the evidence date exceeds 2 years, and additional certificate issued from a NZQA showing Vector WTC 10 MUST be provided	Issue Date = On evidence Expiry date= On evidence or 2 years from issue date
Power.Document.Vector Electricity Equipment Type Assessment	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector Electricity Equipment Type Assessment Vector Electricity Equipment Type Assessment Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Power.Document.Vector Electricity 3 site visits	The evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing course completion of Vector WTC 7A Mita Consulting letter showing attendance for Vector WTC 7A Course with a M – Met Vector Requirements Log book showing 3 site visits with manager/supervisor sign off Assessment Completion and expiry date must be visible Where assessor / trainer signature section is shown on the evidence, this must be completed Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Colour copy or black and white copy is acceptable Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = On evidence Expiry date= Not required
Electrical.Course.Wellington Electricity - U/G Switchgear Types up to 33kV	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Course.Wellington Electricity - Switchgear Types - LV Fuse Gear	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear Downer form for Wellington Electricity Must state Switchgear Types - LV Fuse Gear Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Course.Wellington Electricity - Substation Switchgear Types up to 110kV	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Wellington Electricity - Switchgear Types - LV Fuse Gear Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Course.Wellington Electricity - Specialist Switchgear Types up to 11kV	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Course.Wellington Electricity - Ripple Injection Plant Types	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Course.Wellington Electricity - O/H Switchgear Types up to 33kV	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Course.Wellington Electricity - Capacitor bank plant types	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence
Electrical.Attestation.Wellington Electricity - Electrical Fitting	The required evidence will be one of the following: Certificate or competency card issued from a NZQA accredited training organisation showing completion of Vector WTC 10 Downer form for Vector WTC Attestation Must show Vector WTC 10 Must contain comments Must be signed by manager Where assessor / trainer signature section is shown on the evidence, this must be completed Date of training completion must be visible Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). Copy must be clear and legible Can be in colour copy OR black and white copy Avetta Administrators to click here for instructions on checking NZQA Accredited Providers	Issue Date = as per evidence Expiry date= as per evidence