Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 9
Next »
Safety
Competency Name | Competency Requirements | Upload Requirements | Examples |
---|
Safety.-.Working with Children | - WWCC Card to show applicants name that must match the name registered
- Screenshot of the status from Working with Children Database accepted
- WWCC Number must be listed
- Black and white or colour copy acceptable
Further information around this can be found at: https://www.kidsguardian.nsw.gov.au/child-safe-organisations/working-with-children-check | - Issue Date = As per evidence
- Expiry Date = 5 years from Issue Date
|
|
Competency Name | Competency Requirements | Upload Requirements | Examples |
---|
Site.Induction.Sydney Metro Orientation Training SMOT | When A Sydney Metro Participant results record sheet (issued by Tafe) is uploaded: - Applicants name must be shown on paperwork
- Black and white or colour copies accepted
- This can be accepted as evidence of having completion this orientation (despite not clearly stating Sydney Metro Orientation Training) as all attendees who have received this results sheet have already complete the orientation training prior to being issued with this.
- Course information in the first section of the form must be completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form is to have a trainer name and signature at the bottom of the page
- If the Tafe issued SOA is uploaded with the specified units on competency then this will also be accepted
When a SMOT Daily Attendance Record sheet is uploaded: - Applicants name must be shown on paperwork
- Black and white or colour copies accepted
- Applicants signature must be shown
NOTE: SMIC form without Unique Student Identifier listed can be accepted.
When a SMOT Statement of Completion is uploaded: - Applicants name must be shown on paperwork
- Will show Laing O'Rourke OR Sydney Metro OR Lendlease and Pegasus Logos
- Will show 'Project.Induction. Sydney metro Orientation Training Online Induction' as a delivered competency
- Black and white or colour copies accepted
NOTE: LOR SSJ project induction attendance record is not acceptable for this competency. It's for the site induction which is different paperwork to the SMOT induction. | - Pegasus Staff CLICK HERE for additional business rule information prior to completing file verification in Onsite Track Easy
- Photo of the form can be accepted in lieu of actual scanned copy providing all information can still be clearly seen
- Issue date = Date of completion / end date for training displayed on the induction paperwork
- Start date can be used as issue date where there is no end date
|
|
Competency Name | Competency Requirements |
---|
OH&S-WHS.Induction.Construction ACT | |
OH&S-WHS.Induction.Construction NSW |
OH&S-WHS.Induction.Construction NT |
OH&S-WHS.Induction.Construction QLD |
OH&S-WHS.Induction.Construction SA |
OH&S-WHS.Induction.Construction TAS |
OH&S-WHS.Induction.Construction VIC |
OH&S-WHS.Induction.Construction WA |
Competency Name | Competency Requirements | Upload Requirements | Examples |
---|
Working at Height.Qualified.Work safely at heights | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Manual Handling.Qualified.Manual Handling | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Confined Space.Qualified.Enter and Work in Confined Spaces | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Gas Tester.Qualified.Gas Test Atmospheres | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Health & Safety.Qualified.Health and Safety Representatives (HSR) | | - Issue Date = As per evidence
- Expiry Date = None
|
|
Site Services.Qualified.Monitor and Evaluate Noise | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Chemical Storage.Qualified.Hazardous Chemical Handling and Storage | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Underground Services.Qualified.Identify, Locate and Protect Underground Services | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
OH&S-WHS.Induction.Work safely in construction industry | | Refer to national business rule for statement of attainments and transcripts for issue and expiry date information |
|
Water.Qualified.Waterproofing course | - 'Waterproofer' to be listed
- Must be issued by State Government body and logo to be displayed
- Must be a Contractor Licence (or registration in VIC)
- Duration as per licence
- Black & white or colour is acceptable
| Issue Date = As per licence (if not displayed please leave blank Expiry = As per licence |
|
CPCCCM2007B Explosive Power Tool Onsite competency name TBC |
|
|
|
CPCCCO3047A Concrete Cutting (CC) Onsite competency name TBC |
|
|
|
SMIC Training
Demolition
Competency Name | Competency Requirements | Upload Requirements | Examples |
---|
Site.Trained.SMIC Training - Demolition - Introduction | When statement of attainment is uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
- Must show completion of the following units of competency:
- CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
- CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
- CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
- CPCCDE3017A - Select and use hand tools and equipment for demolition tasks
When transcript (accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
- No expiry
- Must show completion of the following units of competency:
- CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
- CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
- CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
- CPCCDE3017A - Select and use hand tools and equipment for demolition tasks
Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded. | When statement of attainment is uploaded:
- Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry Date = None
When transcript (accepted in lieu of SOA) is uploaded: - Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
- Expiry Date = None
|
|
Site.Trained.SMIC Training - Demolition - Experienced | When statement of attainment is uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
- Must show completion of the following units of competency:
- CPCCCM2001A - Read and interpret plans and specifications
- CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
- CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
- CPCCDE3018A - Select and use small plant and equipment for demolition tasks
- CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
- CPCCDE3017A - Select and use hand tools and equipment for demolition tasks
When transcript (accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
- No expiry
- Must show completion of the following units of competency:
- CPCCCM2001A - Read and interpret plans and specifications
- CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
- CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
- CPCCDE3018A - Select and use small plant and equipment for demolition tasks
- CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
- CPCCDE3017A - Select and use hand tools and equipment for demolition tasks
Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded. | When statement of attainment is uploaded:
- Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry Date = None
When transcript (accepted in lieu of SOA) is uploaded: - Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
- Expiry Date = None
|
|
Site.Trained.SMIC Training - Demolition - Nominated Supervisor | When statement of attainment is uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
- Must show completion of the following units of competency:
- CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
- CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
- CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
- CPCCDE3018A - Select and use small plant and equipment for demolition tasks
- CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
- CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
- CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
- CPCCBC4012B - Read and interpret plans and specifications
- CPCCDE4001A - Plan and prepare for activities on demolition sites
- CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
- CPCCDE4003A - Supervise individual activities on demolition sites
- CPCCDE4004A - Finalise demolition activities and supervise property handover
When transcript (accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
- No expiry
- Must show completion of the following units of competency:
- CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industry
- CPCCBC4002A - Manage occupational health and safety in the building and construction workplace
- CPCCDE3016A - Identify hazards on demolition sites and apply risk management strategies
- CPCCDE3018A - Select and use small plant and equipment for demolition tasks
- CPCCDE3020A - Select and use tools and equipment for hot work in the demolition industry
- CPCCDE3019A - Demolish small buildings and structures using hand tools and small plant and equipment
- CPCCDE3022A - Manage demolition recyclable and waste materials using load shifting equipment
- CPCCBC4012B - Read and interpret plans and specifications
- CPCCDE4001A - Plan and prepare for activities on demolition sites
- CPCCDE4002A - Plan and supervise demolition work to minimise environmental and public health and safety impact
- CPCCDE4003A - Supervise individual activities on demolition sites
- CPCCDE4004A - Finalise demolition activities and supervise property handover
Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded. | When statement of attainment is uploaded:
- Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry Date = None
When transcript (accepted in lieu of SOA) is uploaded: - Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
- Expiry Date = None
|
|
CPCCDE3016A Identify hazards on demolition sites and apply risk management strategies Onsite competency name TBC |
|
|
|
CPCCDE3018A Select and use small plant and equipment for demolition tasks Onsite competency name TBC |
|
|
|
CPCCDE3019A Demolish small buildings and structures using hand tools and small plant and equipment Onsite competency name TBC |
|
|
|
CPCCDE3020A Select and use tools and equipment for hot work in the demolition industry Onsite competency name TBC |
|
|
|
CPCCDE3022A Manage demolition recyclables and waste materials using loading shifting equipment Onsite competency name TBC |
|
|
|
CPCCDE4001A Plan and prepare for activities on demolition sites Onsite competency name TBC |
|
|
|
CPCCDE4002A Plan and supervise demolition works to minimise environmental and public health and safety impact Onsite competency name TBC |
|
|
|
CPCCDE4003A Supervise individual activities on demolition sites Onsite competency name TBC |
|
|
|
CPCCDE4004A Finalise demolition activities and supervise property handover Onsite competency name TBC |
|
|
|
Civil Construction
Competency Name | Competency Requirements | Upload Requirements | Examples |
---|
Site.Trained.SMIC Training - Civil Construction - Introduction Skills Course | When statement of attainment is uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
- Must show completion of the following units of competency:
- RIIRIS201D - Conduct local risk control
- RIIWHS201D - Work safely and follow WHS policies and procedures
When transcript (accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
- No expiry
- Must show completion of the following units of competency:
- RIIRIS201D - Conduct local risk control
- RIIWHS201D - Work safely and follow WHS policies and procedures
Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded. | When statement of attainment is uploaded:
- Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry Date = None
When transcript (accepted in lieu of SOA) is uploaded: - Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
- Expiry Date = None
|
|
Heavy Haulage
Competency Name | Competency Requirements | Upload Requirements | Examples |
---|
Site.Trained.SMIC - Heavy Haulage - Introduction Skills | When statement of attainment is uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on certificate to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
- Must show completion of the following units of competency:
- TLIF0078 - Recognise motor vehicle road crash risks and post-crash actions
When transcript (accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document - Pegasus Administrators to click here for instructions on verifying RTOs
- Name on transcript / statement of results / academic history report to match the name in the system (shortened versions accepted e.g. 'Chris' accepted for Christopher)
- Completion date or issue date must be displayed
- If individual unit results are displayed the result needs to indicate completion / pass result. Grading categories can be referenced HERE
- No expiry
- Must show completion of the following units of competency:
- TLIF0078 - Recognise motor vehicle road crash risks and post-crash actions
Note: Temporary letter or receipt confirming card or replacement card has been ordered (letter written by issuing authority / RTO) may be accepted for this competency upload but only for a time frame of 60 days as nominated on the document. Following this expiry, it is expected the card / certificate will now be uploaded. | When statement of attainment is uploaded:
- Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- Expiry Date = None
When transcript (accepted in lieu of SOA) is uploaded: - Issue Date =
- Completion date - if listed on certificate (this completion date is always used when displayed)
- Issue date - If only an issue date is listed please enter this as the issue date
- If there is a 'from' and a 'to' completion date shown indicating the course was complete over a time frame longer than 1 day, use the 'to' date as the issue date within
- Expiry Date = None
|
|