TriStrux - Electrical

Competency	Competency Requirements	Upload Requirements
Health & Safety.Permit to Work.Electrical Safety (Qualified)	Acceptable evidence can be in the form of: Certificate Refresher Training Trade License On-the-Job Training (OJT) Documentation Evidence must state completion of Electrical Safety Applicant's name should be displayed on the evidence and should match the name registered in the system (however shortened versions of names such as 'Chris' for 'Christopher' is acceptable) Colour copy or black and white copy is acceptable	Issue Date = Date of completion Expiry Date = 1 year
Health & Safety.Permit to Work.Qualified Signal Person	Acceptable evidence can be in the form of: Certificate Refresher Training Evidence must state completion of Signal Person Applicant's name should be displayed on the evidence and should match the name registered in the system (however shortened versions of names such as 'Chris' for 'Christopher' is acceptable) Colour copy or black and white copy is acceptable	Issue Date = Date of completion Expiry Date = 1 year
Safety.Awareness.Lockout/Tagout Awareness	Acceptable evidence can be in the form of: Certificate Refresher Training Safety Meeting/Toolbox Talk Evidence must state completion of: Lockout/Tagout Awareness or Lockout Tagout for Authorized Employees Applicant's name should be displayed on the evidence and should match the name registered in the system (however shortened versions of names such as 'Chris' for 'Christopher' is acceptable) Colour copy or black and white copy is acceptable	Issue Date = Date of completion Expiry Date = not required
Signals.Certificate.Flagger	Acceptable evidence can be in the form of: Certificate Refresher Training Evidence must state completion of Flagger Applicant's name should be displayed on the evidence and should match the name registered in the system (however shortened versions of names such as 'Chris' for 'Christopher' is acceptable) Colour copy or black and white copy is acceptable	Issue Date = Date of completion Expiry Date = 1 year
Electrical.Awareness.Electrical Awareness (Unqualified)	(a) Scope. The training requirements contained in this section apply to employees who face a risk of electric shock that is not reduced to a safe level by the electrical installation requirements of 1910.303 through 1910.308. Note: Employees in occupations listed in Table S-4 face such a risk and are required to be trained. Other employees who also may reasonably be expected to face comparable risk of injury due to electric shock or other electrical hazards must also be trained. (b) Content of training (1) Practices addressed in this standard. Employees shall be trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments. (2) Additional requirements for unqualified persons. Employees who are covered by paragraph (a) of this section but who are not qualified persons shall also be trained in and familiar with any electrically related safety practices not specifically addressed by 1910.331 through 1910.335 but which are necessary for their safety. (c) Type of training. The training required by this section shall be of the classroom or on-the-job type. The degree of training provided shall be determined by the risk to the employee.	The training documentation uploaded should dated be within the past 12 months. Acceptable training documentation should include the following: Subject/Topic of the Training Instructor Name Employee Name Employee Signature Date Training documentation can be in the form of a: Certificate Safety Meeting/Toolbox Talk Refresher Training