Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 26 Next »

 Certificates

 Licence
Competency NameCompetency RequirementsUpload Requirements

Qualification.Certificate.Qualified Supervisor Certificate - Electrical Work

When Licence is uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Screenshots from websites are not accepted - Must be copy of the Licence
  • Must be issued by a relevant Australian state government authority with corresponding logo shown on licence EG NSW Department of Fair Trading
  • Black and white or coloured copy of evidence can be accepted

When Invoice (For new contractor Licence) has been uploaded:

  • Applicants name to be displayed on uploaded evidence and to match applicants registered name
  • ‘Electrician’ with a Q displayed on the licence OR ‘Supervisor electrician’ OR similar to be listed
  • Date of receipt to be displayed on the invoice
  • Contractor number to be displayed on document
  • Must be issued by relevant state government authority
  • Black and white or coloured copy of evidence can be accepted

When Licence is uploaded:

  • Expiry Date = The date of expiration on the evidence

When Invoice (For new contractor Licence) has been uploaded:

The date of expiration on the evidence should be recorded as the date which is calculated to be 4x weeks from the date of renewal completion

 Statement of Attainment

Competency Name

Competency Requirements

Upload Requirements


Electrical.Statement of Attainment.UETTDRRF02 - Perform Pole Top Rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF03 - Perform EWP rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF04 - Perform tower rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF05 - Perform Rescue from Switchyard Structures at Heights

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment

Perform rescue from a live LV panel

  •   Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  •   Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:

        - RTO Name, Code and Logo

        - Units of competency code and name, date completed

        -Date certificate issued

        -Authorised person name or title (does not necessarily need a signature)

        -Issuing organisation’s logo / corporate identifier / unique watermark and / or                  document or certificate number

        -Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only -            Not Card)

·Accepted also is a spreadsheet from Essential Energy - This will show Essential Energy as the Organisation, Given Name, Surname, Completion date and course details 

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted

·         Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

·         Expiry date is 13 months from date of training completion

Accepted UOC:

·         UETTDRRF06,; or

·         UETDRRF004

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 13 months from date of training completion


Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDRRF08 - Perform EWP controlled descent escape

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence is not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date is 1 year from date of training completion



Electrical.Statement of Attainment.UETTDREL13 - Comply with environmental and incidental response procedures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL16 - Working safely near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL17 - Operate asset inspection machinery and equipment near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL18 - Inspect and treat poles and inspect electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL19 - Identify & interpret characteristics of elec apparatus associated with power industry

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRRF10 - First Aid in an ESI Environment

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Certificate.UETTDRRF11 - Testing of connections to low voltage electricity networks 
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC21A - Use climbing techniques to cut vegetation above ground near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC24 – Assess vegetation and recommend control measures in an ESI environment 

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC25 – Use EWP to cut above ground vegetation near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC26 – Cut vegetation at ground near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UETTDRVC31 – Operate specialised plant & equipment at ground level near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC32 - Use specialised plant to cut vegetation above ground level near live electrical appara

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC34A - Undertake release and rescue from a tree near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.AHCARB204A - Undertake standard climbing techniques

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted.

NOTE: AHCARB322 supersedes and is equivalent to AHCARB312 and AHCARB204A - Use Standard climbing techniques to access trees.


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.AHCPCM201A - Recognise plants

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.TLILIC2005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE:Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UEENEE101A - Apply OHS regulations, codes and practices in the workplace

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UUETTDREL13A - Comply with sustainability, environmental and incidental response policies and procedures

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDREL14A - Working safely near live electrical apparatus as a non-electrical worker

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.AHCARB205A - Operate and maintain chainsaws

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC23A - Plan the removal of vegetation up to vegetation exclusion zone near live electrical apparatus

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted
  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Statement of Attainment.UETTDRVC27A - Monitor safety compliance of vegetation control work in an ESI environment

  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted


  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required



Electrical.Certificate.UETTDRDP14A - Maintain energised HV distribution overhead electrical apparatus (glove)
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Certificate.UETTDRDP13A - Maintain energised HV distribution overhead electrical apparatus (stick)
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

Electrical.Statement of Attainment.UETTDRRF07 - Perform cable pit/trench/excavation rescue
  • Applicants name to be shown on document
  • Applicants name on document must match cardholders registered name (However shortened versions of first names such as 'Chris' for 'Christopher' is acceptable)
  • Please note: the certified document that has been issued by the Registered Training Organisation (RTO)** must meet the following requirements to be approved:
    • RTO Name, Code and Logo
    • Units of competency code and name, date completed
    • Date certificate issued
    • Authorised person name or title (does not necessarily need a signature)
    • Issuing organisation’s logo / corporate identifier / unique watermark and / or document or certificate number
    • Nationally Recognised Training (NRT) Logo (For a Statement of Attainment only - Not Card)

**RTO registration must only have been current at the time of training completion / awarding the document

o    Document verifier to ensure the Issue of this document is an RTO.

Click HERE for Internal Process on checking RTO’s

NOTE: Cards are accepted in lieu of statement of attainment certificates providing they show the relevant statement of attainment unit of competency as well as all other necessary information relating to applicant details and RTO details

NOTE: Temporary / Interim statement of attainment evidence not accepted

  • Record the Issue date within Onsite as follows:

Completion date / Training Date - if listed on certificate (this date is always used when displayed)

Issue date - If only an issue date is listed please enter this as the issue date

  • Expiry date not required

  • No labels