Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

 Unit Standards - Electrical
Competency Title*Competency Requirements Upload RequirementsExamples

Electrical.Unit Standard.10507 - Use personal protective equipment in an electricity supply environment

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
          • For any competency that shows 'unit standard' in the competency title - if the evidence indicates 'VOC' or 'Refresher' it cannot be accepted
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required
Electrical.Unit Standard.10508 - Identify electricity systems used in the electricity supply industry

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10509 - Climb and work on electricity network structures

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10543 - Plan, identify & protect underground services during excavation & reinstatement

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10544 - Install Electrical lines & cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10545 - Terminate & joint de-energised LV polymeric insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10546 - Joint LV AC paper insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10547 - Joint HV polymeric insulated power cables up to 22kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10548 - Joint HV paper insulated power cables up to & including 11kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10549 - Load, transport & store electricity supply cables, plant & equip

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10550 - Joint HV polymeric insulated power cables up to 33kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10551 - Joint HV solid paper insulated multicore power cables from 22kV to 33kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10552 - Joint paper insulated oil pressure multicore power cables from 22kv to 110kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.10553 - Joint paper insulated gas pressure multicore power cables from 22kV to 110kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.12295 - Apply & remove earths from conductors

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.12296 - Apply earths to & remove earths from electrical conductors, plant & equip

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.12300 - DKO safety statutes & codes

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14271 - Carry out acceptance, commissioning & maintenance tests on power transforming

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14272 - Carry out maintenance &/or acceptance test on HV circuit breakers

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14275 - Carry out maintenance &/or commissioning tests on an earthing mat & equip bonding system

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14276 - Carry out maintenance &/or commissioning test on HV power cables & terminations

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14283 - Carry out tests on distribution oil filled power transformers of 33kV & below 10 MVA

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14287 - Use & maintain test instruments HV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14288 - Carry out tests on battery banks & charge systems

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.14330 - Install substation earthing & bonding system

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.17025 - Rescue a victim from an electrical structure

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.17026 - DKO of safe entry into restricted areas on an electricity supply site

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.17027 - Access permits for work on electrical lines, cables & equip

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.17028 - Permits on high voltage electrical equip

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy


Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.17152 - Carry out tree work near electricity supply lines

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18024 - Install structure mounted electrical equipment

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18026 - Carry out a rescue from an electricity supply services pit

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18027 - Draw sketches and interpret electricity supply service plans

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18029 - DKO polarity and phasing in LV and HV electricity network

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18038 - Describe health and safety duties on electricity supply sites

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18274 - DKO electricity supply networks

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18275 - Major sectors in the New Zealand electricity supply industry

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18276 - Operate light lifting & rigging equipment

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.18278 - Service battery banks

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.19950 - DKO electrical test instruments and carry out electrical testing

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20059 - Terminate LV polymeric insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20060 - Terminate LV paper insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20061 - Terminate HV polymeric insulated power cables up to 22kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20062 - Terminate HV paper insulated power cables up to and including 11kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20063 - Terminate HV polymeric insulated power cables up to 33kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20064 - Terminate HV solid paper insulated multicore power cables from 22kV to 33kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20065 - Terminate paper insulated oil pressure multicore power cables from 22kV to 110kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20066 - Terminate paper insulated gas pressure multicore power cables from 22kV to 110kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20067 - Joint HV polymeric insulated multicore power cables from 22kV to 110kV


The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20068 - Terminate HV polymeric insulated multicore power cables from 22kV to 110kV

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20069 - Joint live LV paper insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20070 - Terminate live LV paper insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20071 - Joint live LV polymeric insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20072 - Terminate live LV polymeric insulated power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20073 - DKO the installation of power cables

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20092 - DKO plant and equipment

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20190 - Conduct introductory insulation resistance testing

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.20535 - Joint HV paper insulated cable to polymeric insulated cable up to 22kV using a transition jo

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.23898 - Describe and carry out polarity and phasing tests on LV

  • The required evidence will be either:

    • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

    OR 

    • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
            • Must state "unit standard achieved"
            • 'Unit standards aligned' is not acceptable 
      • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
      • Date of unit standards achieved must be visible 
      • Copy must be clear and legible
      • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.23898 & 23899 Polarity & Phasing

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.23899 - Describe and carry out phasing tests on HV electricity networks

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.26019 - DKO introductory concepts in power system protection

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.26019 & 26020 or 29736

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.26020 - DKO intermediate concepts in power system protection

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.26705 - Carry out tree work in the insulated tool zone around power lines

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28020 - DKO safe working electrical practices for Electricity Supply Workers

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28112 - Operate and store machinery, plant, and equipment in an electricity network environment

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28113 - Install pad and structure mounted electrical equipment

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28194 - Describe polarity & phasing tests on electricity supply networks

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28277 - DKO power cable construction

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28277 & 28280 Power Cable

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28280 - DKO underground power cable installation requirements

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


Electrical.Unit Standard.28895 - Maintain substation earthing and bonding

The required evidence will be either:

  • NZQA Record of Achievement showing completion of the unit standard which is listed in the competency title*

OR 

  • Certificate or competency card issued from a NZQA accredited training organisation showing unit standard which is listed in the competency title*
          • Must state "unit standard achieved"
          • 'Unit standards aligned' is not acceptable 
    • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
    • Date of unit standards achieved must be visible 
    • Copy must be clear and legible
    • Can be in colour copy OR black and white copy

Issue Date = Not required


Expiry Date = Not Required


  • No labels