Competency | Competency Requirements | Upload Requirements | Examples |
---|
Demolition.Statement of Attainment.BSBMGT401 Show leadership in the workplace | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
NOTE: This SOA unit is required to be complete for all supervisors within 6 months of attendance at the supervisor course - see Supervisor.Certificate.Interim (6 month) business rule for more information | When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.BSBRSK401 Identify risk and apply risk management processes | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
NOTE: This SOA unit is required to be complete for all supervisors within 6 months of attendance at the supervisor course - see Supervisor.Certificate.Interim (6 month) business rule for more information | When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCBC4002A Manage occupational health and safety in the bui | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE3016A Identify hazards on demolition sites and apply r | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE3017A Select and use hand tools and equipment for demo | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE3018A Select and use small plant and equipment for dem | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE3019A Demolish small buildings and structures using ha | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE3020A Select and use tools and equipment for hot work | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE3022A Manage demolition recyclables and waste material | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE4001A Plan and prepare for activities on demolition si | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE4002A Plan and supervise demolition works to minimise | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE4003A Supervise individual activities on demolition si | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCDE4004A Finalise demolition activities & property Handov | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCM2001A Read and interpret plans and specifications | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |
Demolition.Statement of Attainment.CPCCOHS2001A Apply OHS Requirements, policies and procedures | When a tafe issued participant results record is uploaded: - Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- Specific unit of competency must be shown on the sheet that aligns to this competency code and title
- Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
- Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
- Last section of form to have trainer name and signature at the bottom of the page
When statement of Attainment is Uploaded: - RTO Name, National Provider Code / RTO Number & Logo to be displayed on document
- Name on certificate to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on certificate to match the nominated unit within Onsite
- Name and / or signature of issuer
- Document / Certificate / Statement of Attainment Number
- Nationally Recognised Training logo
- No expiry
When Transcript (Accepted in lieu of SOA) is uploaded: - RTO Name & Logo to be displayed on document
- Name on transcript / statement of results / Academic history report to match the name in the system (shortened versions accepted e.g. ‘Chris’ accepted for Christopher)
- completion date or issue date must be displayed
- Unit of competency listed on document to match the nominated unit within Onsite
- If individual unit results are displayed the result needs to indicate completion / pass result.
Grading categories can be referenced HERE - No expiry
| When a tafe issued participant results record is uploaded: 'End Date' should be recorded as the date of training completion / Issue date in Onsite. NOTE: You can record the 'start date' instead if this is the only date shown between the two fields
When statement of attainment is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite:
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date When Transcript (Accepted in lieu of SOA) is uploaded: - Document verifier to ensure the Issue of this document is an RTO.
- Record the Issue date within Onsite
Completion date - if listed on certificate (this completion date is always used when displayed) Issue date - If only an issue date is listed please enter this as the issue date If there is a ‘from’ and a ‘to‘ completion date shown indicating the course was complete over a time frame longer than 1 day, use the ‘to’ date as the issue date within | RIW Document Examples | Statement of Attainment |