Page Comparison

High Risk Work.Unit Standard.17309 - Operate a wheeled loader on infrastructure works sites

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17309 - Operate a wheeled loader on infrastructure works sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.1737 - Drive a heavy vehicle on unsealed road surfaces

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US1737 - Drive a heavy vehicle on unsealed road surfaces
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.1738 - Drive a heavy vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US1738 - Drive a heavy vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17599 - Plan a confined space entry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17599 - Plan a confined space entry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17976 - DKO operating a light 4WD vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17976 - DKO operating a light 4WD vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17978 - Operate a light 4WD vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17978 - Operate a light 4WD vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18037 - Plan a confined space entry in the electricity supply industry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18037 - Plan a confined space entry in the electricity supply industry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18272 - Operate a mobile elevating work platform (MEWP) in the ESI

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18272 - Operate a mobile elevating work platform (MEWP) in the ESI
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18426 - DKO hazards associated with confined spaces

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18426 - DKO hazards associated with confined spaces
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.19207 - Work in a confined space in the infrastructure industry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US19207 - Work in a confined space in the infrastructure industry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.20875 - DKO slinging, lifting, moving, and placing loads using mobile plant

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US20875 - DKO slinging, lifting, moving, and placing loads using mobile plant
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.22279 - Operate a skid steer on infrastructure works sites

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US22279 - Operate a skid steer on infrastructure works sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23232 - Develop a rescue plan for recovery of a suspended individual after a fall

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • 23232 - Develop a rescue plan for recovery of a suspended individual after a fall
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24556 - DKO the safe operation of a light utility vehicle (LUV)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24556 - DKO the safe operation of a light utility vehicle (LUV)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.30072 - Demonstrate and apply knowledge of slinging regular loads safely

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US30072 - Demonstrate and apply knowledge of slinging regular loads safel
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.3789 - Sling varied regular loads and safely direct a crane during crane operations

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US3789 - Sling varied regular loads and safely direct a crane during crane operations
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.6916 - DKO the rules relating to chainsaw use

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US6916 - DKO the rules relating to chainsaw use
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.6917 - Demonstrate basic chainsaw operation

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US6917 - Demonstrate basic chainsaw operation
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.15757 - Use, install & disestablish temporary proprietary height safety systems

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US15757 - Use, install & disestablish temporary proprietary height safety systems
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23229 - Use safety harness system when working at height

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23229 - Use safety harness system when working at height
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Qualified.Previously hold crane operation unit standard

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • 16617 - Use a truck loader crane to lift & place regular loads
    • Date achieved MUST be Prior to  2010 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.21467 - Store and handle workplace chemicals

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US21467 - Store and handle workplace chemicals
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24559 - Operate a quad bike on rolling terrain

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24559 - Operate a quad bike on rolling terrain
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US 24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24561 - Operate a quad bike with trailed equipment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24561 - Operate a quad bike with trailed equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31290 - Knowledge of safe management and potential adverse effects of hazardous substances

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US 31290 - Knowledge of safe management and potential adverse effects of hazardous substances
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31293 - Safe handling, storage, and disposal of hazardous substances in the workplace

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US31293 - Safe handling, storage, and disposal of hazardous substances in the workplace
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US3800 - Use a radio remote or pendant controlled gantry crane to lift and place regular loads
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16617 - Use a truck loader crane to lift & place regular loads
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.10851 - Operate a powered industrial lift truck (forklift)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10851 - Operate a powered industrial lift truck (forklift)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Certificate of Competency.10 Standard Pressure Control

The required evidence will be one of the following:

• • Signed CoC training form Gas CoC New/Refresher Reporting form issued from a recognised training provider showing evidence of having completed Standard Pressure Control training

AND

• • completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards:

US5929,

10984,

12456,

19555,

19557,

19560,

30382,

30383,

32041

OR

Signed document containging Standard Pressure Control
• • Gas CoC New/Refresher Reporting form issued from a recognised
provider and
• • training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their
old
• • Mito CoC card or MITO database screenshot showing
they previously held the CoC is required
• • expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Evidence must not show personal information such as D.O.B, NSN number and units/quals that do not relate to industry. Take screen shots where required
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.11 Complex Pressure Control

Gas.Certificate of Competency.12 Network Leakage Response

Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect

Gas.Certificate of Competency.14 Gas Fitter - Gas Leakage Response on GMS <25m3/hr

Gas.Certificate of Competency.2 Safety Induction

Gas.Certificate of Competency.3 Safe Working

Gas.Certificate of Competency.4 Gas Foundation

Gas.Certificate of Competency.5 Replace GMS <25m3/hour

Gas.Certificate of Competency.6 PE Pipelaying Only

Gas.Certificate of Competency.7 Construct PE Services

Gas.Certificate of Competency.8 Construct PE Mains

Gas.Certificate of Competency.9 Construct Steel Mains and Services

Gas.Certificate of Competency.E1 PE Pipe Jointing Electro Fusion

Gas.Certificate of Competency.E10 Leakage Survey (Walking)

Gas.Certificate of Competency.E11 Leakage Survey (Vehicle)

Gas.Certificate of Competency.E12 Issue Work Permits

Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt Fusion

Gas.Certificate of Competency.E3 Hydrostatic Testing

Gas.Certificate of Competency.E4 Hot Tap Steel Pipe

Gas.Certificate of Competency.E5 Install CP Test Points

Gas.Certificate of Competency.E6 Odorant Survey

Gas.Certificate of Competency.E7 Cathodic Protection Survey

Gas.Certificate of Competency.E8 Mark-outs & Standovers

Gas.Certificate of Competency.E9 Valve MaintenanceThe required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US 30384, 30385

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Complex Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.12 Network Leakage Response

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

AND   NZQA Record of Achievement showing completion of the following unit standards:  US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of their Mito CoC card or MITO database screenshot showing expired Network Leakage Response

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

AND   NZQA Record of Achievement showing completion of the following unit standards: US30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect, and/or Reconnect

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.14 Gas Fitter - Gas Leakage Response on GMS <25m3/hr

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - Gas Leakage Response on GMS <25m3/hr

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.2 Safety Induction

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US497, 17593, 32105

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction AND a copy of their Mito CoC card or MITO database screenshot showing expired Safety Induction

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.3 Safe Working

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

AND   NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working AND a copy of their Mito CoC card or MITO database screenshot showing expired Safe Working

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.4 Gas Foundation

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Foundation

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation

Issue Date= Date application has been proceeded

Expiry Date= 2 years following issue date

Gas.Certificate of Competency.5 Replace GMS <25m3/hour

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour training

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour training AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.6 PE Pipelaying Only

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.7 Construct PE Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.8 Construct PE Mains

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.9 Construct Steel Mains and Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E1 PE Pipe Jointing Electro Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E10 Leakage Survey (Walking)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E11 Leakage Survey (Vehicle)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E12 Issue Work Permits

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E3 Hydrostatic Testing

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E4 Hot Tap Steel Pipe

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E5 Install CP Test Points

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E6 Odorant Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E7 Cathodic Protection Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E8 Mark-outs & Standovers

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E9 Valve Maintenance

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date