Page Comparison

High Risk Work.Unit Standard.17309 - Operate a wheeled loader on infrastructure works sites

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17309 - Operate a wheeled loader on infrastructure works sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.1737 - Drive a heavy vehicle on unsealed road surfaces

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US1737 - Drive a heavy vehicle on unsealed road surfaces
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.1738 - Drive a heavy vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US1738 - Drive a heavy vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17599 - Plan a confined space entry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17599 - Plan a confined space entry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17976 - DKO operating a light 4WD vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17976 - DKO operating a light 4WD vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.17978 - Operate a light 4WD vehicle in an off-road environment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US17978 - Operate a light 4WD vehicle in an off-road environment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18037 - Plan a confined space entry in the electricity supply industry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18037 - Plan a confined space entry in the electricity supply industry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18272 - Operate a mobile elevating work platform (MEWP) in the ESI

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18272 - Operate a mobile elevating work platform (MEWP) in the ESI
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.18426 - DKO hazards associated with confined spaces

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US18426 - DKO hazards associated with confined spaces
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.19207 - Work in a confined space in the infrastructure industry

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US19207 - Work in a confined space in the infrastructure industry
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.20875 - DKO slinging, lifting, moving, and placing loads using mobile plant

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US20875 - DKO slinging, lifting, moving, and placing loads using mobile plant
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.22279 - Operate a skid steer on infrastructure works sites

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US22279 - Operate a skid steer on infrastructure works sites
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23232 - Develop a rescue plan for recovery of a suspended individual after a fall

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • 23232 - Develop a rescue plan for recovery of a suspended individual after a fall
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23960 - Assess the worksite, prepare and operate a scissor lift elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23961 - Assess the worksite, prepare and operate a truck-mounted elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23962 - Self-propelled Boom Lift Elevating Work Platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23963 - Assess the worksite, prepare and operate a trailer-mounted elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23964 - Assess the worksite, prepare and operate a vertical lift elevating work platform (EWP)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23966 - Describe types of elevating work platforms (EWPs) and legislative requirements for their use
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24553 - Operate a light utility vehicle (LUV) on flat terrain in the workplace under close supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24556 - DKO the safe operation of a light utility vehicle (LUV)

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24556 - DKO the safe operation of a light utility vehicle (LUV)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24558 - Operate a light utility vehicle (LUV) on rolling terrain under limited supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24562 - Operate a light utility vehicle (LUV) with mounted equipment or a load under limited supervision
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US25510 - Operate an atmospheric testing device to determine a suitable atmosphere exists to work safe
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.30072 - Demonstrate and apply knowledge of slinging regular loads safely

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US30072 - Demonstrate and apply knowledge of slinging regular loads safel
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US31953 & 31955 - Operate light lifting and rigging equipment & Demonstrate knowledge of light lifting
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.3789 - Sling varied regular loads and safely direct a crane during crane operations

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US3789 - Sling varied regular loads and safely direct a crane during crane operations
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.6916 - DKO the rules relating to chainsaw use

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US6916 - DKO the rules relating to chainsaw use
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.6917 - Demonstrate basic chainsaw operation

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US6917 - Demonstrate basic chainsaw operation
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.15757 - Use, install & disestablish temporary proprietary height safety systems

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US15757 - Use, install & disestablish temporary proprietary height safety systems
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.23229 - Use safety harness system when working at height

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US23229 - Use safety harness system when working at height
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Qualified.Previously hold crane operation unit standard

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • 16617 - Use a truck loader crane to lift & place regular loads
    • Date achieved MUST be Prior to  2010 
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted). 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.21467 - Store and handle workplace chemicals

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US21467 - Store and handle workplace chemicals
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24559 - Operate a quad bike on rolling terrain

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24559 - Operate a quad bike on rolling terrain
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US 24560 - Operate a Light Utility Vehicle (LUV) with trailed equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.24561 - Operate a quad bike with trailed equipment

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US24561 - Operate a quad bike with trailed equipment
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31290 - Knowledge of safe management and potential adverse effects of hazardous substances

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US 31290 - Knowledge of safe management and potential adverse effects of hazardous substances
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

High Risk Work.Unit Standard.31293 - Safe handling, storage, and disposal of hazardous substances in the workplace

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US31293 - Safe handling, storage, and disposal of hazardous substances in the workplace
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

The required evidence will be a:

• • NZQA Record of Achievement showing completion of the following unit standard:
    • US3800 - Use a radio remote or pendant controlled gantry crane to lift and place regular loads
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16617 - Use a truck loader crane to lift & place regular loads
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.10851 - Operate a powered industrial lift truck (forklift)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US10851 - Operate a powered industrial lift truck (forklift)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16701 - Demonstrate knowledge and skills for driving on a road for endorsement W (wheels)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16702 -Demonstrate knowledge and skills for driving on a road for endorsement R (rollers)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US16703 - Demonstrate knowledge and skills for driving on a road for endorsement T (tracks)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US17574 - Operate a rigid vehicle to meet the requirements for a full class 2 driver licence
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Heavy Vehicle.Unit Standard.18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)

• The required evidence will be a:
  • NZQA Record of Achievement showing completion of the following unit standard:
    • US18496 - Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklift)
  • Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
  • Date of unit standards achieved must be visible 
  • Copy must be clear and legible
  • Can be in colour copy OR black and white copy

Issue Date = Credit Result date

Gas.Certificate of Competency.10 Standard Pressure Control

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.11 Complex Pressure Control

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US 30384, 30385

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Complex Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Complex Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.12 Network Leakage Response

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

AND   NZQA Record of Achievement showing completion of the following unit standards:  US10975, 10981, 12503, 12526, 19549, 19552, 25610, 30371, 30379, 30383, 31448, 32035, US32334

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response AND a copy of their Mito CoC card or MITO database screenshot showing expired Network Leakage Response

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Network Leakage Response

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.13 Gas Fitter - GMS Change, Disconnect, and/or Reconnect

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

AND   NZQA Record of Achievement showing completion of the following unit standards: US30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - GMS Change, Disconnect, and/or Reconnect

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - GMS Change, Disconnect, and/or Reconnect

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.14 Gas Fitter - Gas Leakage Response on GMS <25m3/hr

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US12507, 19552, 30370, 30382, 30383, 32040, 32041, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Fitter - Gas Leakage Response on GMS <25m3/hr

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Fitter - Gas Leakage Response on GMS <25m3/hr 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.2 Safety Induction

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction 

AND   NZQA Record of Achievement showing completion of the following unit standards:  US497, 17593, 32105

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction AND a copy of their Mito CoC card or MITO database screenshot showing expired Safety Induction

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safety Induction

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.3 Safe Working

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

AND   NZQA Record of Achievement showing completion of the following unit standards: US3271, 6401, 6402, 18426, 30265

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working AND a copy of their Mito CoC card or MITO database screenshot showing expired Safe Working

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 3 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Safe Working

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.4 Gas Foundation

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation 

AND   NZQA Record of Achievement showing completion of the following unit standards: US10995, 11327, 11328, 12502, 12507, 17596, 20877, 20878, 25510, 30367, 30370, 30380, 32040, 32042

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation AND a copy of their Mito CoC card or MITO database screenshot showing expired Gas Foundation

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Gas Foundation

Issue Date= Date application has been proceeded

Expiry Date= 2 years following issue date

Gas.Certificate of Competency.5 Replace GMS <25m3/hour

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour traininghour 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of  Replace GMS <25m3/hour training AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure controlReplace GMS <25m3/hour 

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control of  Replace GMS <25m3/hour training

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.6 PE Pipelaying Only

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.7 Construct PE Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.8 Construct PE Mains

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.9 Construct Steel Mains and Services

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E1 PE Pipe Jointing Electro Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E10 Leakage Survey (Walking)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E11 Leakage Survey (Vehicle)

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E12 Issue Work Permits

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E2 PE Pipe Jointing - Butt Fusion

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E3 Hydrostatic Testing

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E4 Hot Tap Steel Pipe

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E5 Install CP Test Points

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E6 Odorant Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E7 Cathodic Protection Survey

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E8 Mark-outs & Standovers

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date

Gas.Certificate of Competency.E9 Valve Maintenance

The required evidence will be one of the following:

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

AND   NZQA Record of Achievement showing completion of the following unit standards: US5929, 10984, 12456, 19555, 19557, 19560, 30382, 30383, 32041

OR

• • Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control AND a copy of their Mito CoC card or MITO database screenshot showing expired Standard Pressure control

• Where assessor / trainer signature section is shown on the evidence, this must be completed
• Applicant’s name should be displayed on the evidence and should match the applicant’s name that is registered in Pegasus (However shortened versions of names such as 'Chris' for 'Christopher' is accepted).
• Copy must be clear and legible
• Can be in colour copy OR black and white copy

Where the evidence completion date exceeds 2 years, an additional document showing 

• Gas CoC New/Refresher Reporting form issued from a recognised training provider showing completion "C" or "tick" of Standard Pressure Control 

Issue Date= Date application has been proceeded

Expiry Date= 3 years following issue date